mirror of
https://github.com/docker-mailserver/docker-mailserver.git
synced 2024-01-19 02:48:50 +00:00
f496897b09
* add functionality for filtering mail log by ID This was not planned, but as @polarthene mentioned in https://github.com/docker-mailserver/docker-mailserver/pull/3033#issuecomment-1407169569 , filtering the mail log by email ID would be (the only) correct approach for the Rspamd test (to eliminate race conditions). I asserted the currect state, and came to the conclusion that this might (or actually is) something we want in more than one place. So I went ahead and implemented a solution. The solution for acquiring the ID is a bit slower because it ensures the mail queue is empty _before_ and _after_ the mail is sent. This is the tradeoff one has to make if they want to send multiple emails in one test file and get their IDs. I hope you like this approach. I will provide another PR that adjusts our current tests to use these new functions. * added note about our helper functions in the docs I think our work for our custom test framework should be noted in the docs for newcomers to better understand what they should do. * adjust Rspamd test to use new helpers for sending * improve filter helpers further * add sanity check when acquiring mail ID * re-add `refute_output` to test which should now work well
137 lines
7.3 KiB
Markdown
137 lines
7.3 KiB
Markdown
---
|
||
title: 'Tests'
|
||
---
|
||
|
||
!!! quote "_Program testing can be used to show the presence of bugs, but never to show their absence!_"
|
||
|
||
– Edsger Wybe Dijkstra
|
||
|
||
## Introduction
|
||
|
||
DMS employs a variety of unit and integration tests. All tests and associated configuration is stored in the `test/` directory. If you want to change existing functionality or integrate a new feature into DMS, you will probably need to work with our test suite.
|
||
|
||
!!! question "Can I use macOS?"
|
||
|
||
We do not support running linting, tests, etc. on macOS at this time. Please use a Linux VM, Debian/Ubuntu is recommended.
|
||
|
||
### About
|
||
|
||
We use [BATS] (_Bash Automated Testing System_) and additional support libraries. BATS is very similar to Bash, and one can easily and quickly get an understanding of how tests in a single file are run. A [test file template][template-test] provides a minimal working example for newcomers to look at.
|
||
|
||
### Structure
|
||
|
||
The `test/` directory contains multiple directories. Among them is the `bats/` directory (_which is the [BATS] git submodule_) and the `helper/` directory. The latter is especially interesting because it contains common support functionality used in almost every test. Actual tests are located in `test/tests/`.
|
||
|
||
!!! warning "Test suite undergoing refactoring"
|
||
|
||
We are currently in the process of restructuring all of our tests. Tests will be moved into `test/tests/parallel/` and new tests should be placed there as well.
|
||
|
||
### Using Our Helper Functions
|
||
|
||
There are many functions that aid in writing tests. **We urge you to use them!** They will not only ease writing a test but they will also do their best to ensure there are no race conditions or other unwanted side effects. To learn about the functions we provide, you can:
|
||
|
||
1. look into existing tests for helper functions we already used
|
||
2. look into the `test/helper/` directory which contains all files that can (and will) be loaded in test files
|
||
|
||
We encourage you to try both of the approaches mentioned above. To make understanding and using the helper functions easy, every function contains detailed documentation comments. Read them carefully!
|
||
|
||
### How Are Tests Run?
|
||
|
||
Tests are split into two categories:
|
||
|
||
- **`test/tests/parallel/`:** Multiple test files are run concurrently to reduce the required time to complete the test suite. A test file will presently run it's own defined test-cases in a sequential order.
|
||
- **`test/tests/serial/`:** Each test file is queued up to run sequentially. Tests that are unable to support running concurrently belong here.
|
||
|
||
Parallel tests are further partitioned into smaller sets. If your system has the resources to support running more than one of those sets at a time this is perfectly ok (_our CI runs tests by distributing the sets across multiple test runners_). Care must be taken not to mix running the serial tests while a parallel set is also running; this is handled for you when using `make tests`.
|
||
|
||
## Running Tests
|
||
|
||
### Prerequisites
|
||
|
||
To run the test suite, you will need to:
|
||
|
||
1. [Install Docker][get-docker]
|
||
2. Install `jq` and (GNU) `parallel` (under Ubuntu, use `sudo apt-get -y install jq parallel`)
|
||
3. Execute `git submodule update --init --recursive` if you haven't already initialized the git submodules
|
||
|
||
### Executing Test(s)
|
||
|
||
We use `make` to run commands. You will first need to build the container image via `make build`. You can then:
|
||
|
||
1. Run all tests: `make clean tests`
|
||
2. Run a single test: `make clean generate-accounts test/<TEST NAME WITHOUT .bats SUFFIX>`
|
||
3. Run multiple unrelated tests: `make clean generate-accounts test/<TEST NAME WITHOUT .bats SUFFIX>,<TEST NAME WITHOUT .bats SUFFIX>` (just add a `,` and then immediately write the new test name)
|
||
4. Run a whole set or all serial tests: `make clean generate-accounts tests/parallel/setX` where `X` is the number of the set or `make clean generate-accounts tests/serial`
|
||
|
||
??? tip "Setting the Degree of Parallelization for Tests"
|
||
|
||
If your machine is capable, you can increase the amount of tests that are run simultaneously by prepending the `make clean all` command with `BATS_PARALLEL_JOBS=X` (i.e. `BATS_PARALLEL_JOBS=X make clean all`). This wil speed up the test procedure. You can also run all tests in serial by setting `BATS_PARALLEL_JOBS=1` this way.
|
||
|
||
The default value of `BATS_PARALLEL_JOBS` is 2. This can be increased if your system has the resources spare to support running more jobs at once to complete the test suite sooner.
|
||
|
||
!!! warning "Test Output when Running in Parallel"
|
||
|
||
[When running tests in parallel][docs-bats-parallel] (_with `make clean generate-accounts tests/parallel/setX`_), BATS will delay outputting the results until completing all test cases within a file.
|
||
|
||
This likewise delays the reporting of test-case failures. When troubleshooting parallel set tests, you may prefer to run specific tests you're working on serially (_as demonstrated in the example below_).
|
||
|
||
When writing tests, ensure that parallel set tests still pass when run in parallel. You need to account for other tests running in parallel that may interfere with your own tests logic.
|
||
|
||
### An Example
|
||
|
||
In this example, you've made a change to the Rspamd feature support (_or adjusted it's tests_). First verify no regressions have been introduced by running it's specific test file:
|
||
|
||
```console
|
||
$ make clean generate-accounts test/rspamd
|
||
rspamd.bats
|
||
✓ [Rspamd] Postfix's main.cf was adjusted [12]
|
||
✓ [Rspamd] normal mail passes fine [44]
|
||
✓ [Rspamd] detects and rejects spam [122]
|
||
✓ [Rspamd] detects and rejects virus [189]
|
||
```
|
||
|
||
As your feature work progresses your change for Rspamd also affects ClamAV. As your change now spans more than just the Rspamd test file, you could run multiple test files serially:
|
||
|
||
```console
|
||
$ make clean generate-accounts test/rspamd,clamav
|
||
rspamd.bats
|
||
✓ [Rspamd] Postfix's main.cf was adjusted [12]
|
||
✓ [Rspamd] normal mail passes fine [44]
|
||
✓ [Rspamd] detects and rejects spam [122]
|
||
✓ [Rspamd] detects and rejects virus [189]
|
||
clamav.bats
|
||
✓ [ClamAV] log files exist at /var/log/mail directory [68]
|
||
✓ [ClamAV] should be identified by Amavis [67]
|
||
✓ [ClamAV] freshclam cron is enabled [76]
|
||
✓ [ClamAV] env CLAMAV_MESSAGE_SIZE_LIMIT is set correctly [63]
|
||
✓ [ClamAV] rejects virus [60]
|
||
```
|
||
|
||
You're almost finished with your change before submitting it as a PR. It's a good idea to run the full parallel set those individual tests belong to (_especially if you've modified any tests_):
|
||
|
||
```console
|
||
$ make clean generate-accounts tests/parallel/set1
|
||
default_relay_host.bats
|
||
✓ [Relay] (ENV) 'DEFAULT_RELAY_HOST' should configure 'main.cf:relayhost' [88]
|
||
spam_virus/amavis.bats
|
||
✓ [Amavis] SpamAssassin integration should be active [1165]
|
||
spam_virus/clamav.bats
|
||
✓ [ClamAV] log files exist at /var/log/mail directory [73]
|
||
✓ [ClamAV] should be identified by Amavis [67]
|
||
✓ [ClamAV] freshclam cron is enabled [76]
|
||
...
|
||
```
|
||
|
||
Even better, before opening a PR run the full test suite:
|
||
|
||
```console
|
||
$ make clean tests
|
||
...
|
||
```
|
||
|
||
[BATS]: https://github.com/bats-core/bats-core
|
||
[template-test]: https://github.com/docker-mailserver/docker-mailserver/blob/master/test/tests/parallel/set2/template.bats
|
||
[testing-prs]: https://github.com/docker-mailserver/docker-mailserver/blob/master/.github/workflows/test_merge_requests.yml
|
||
[get-docker]: https://docs.docker.com/get-docker/
|
||
[docs-bats-parallel]: https://bats-core.readthedocs.io/en/v1.8.2/usage.html#parallel-execution
|