* added check for Rspamd DKIM on startup
The newly added function `__rspamd__check_dkim_permissions` performs a
check on DKIM private key files. This is useful to prevent issues
like #3621 in the future. The function is deliberately kept simple and
may not catch every single misconfiguration in terms of permissions and
ownership, but it should be quite accurate.
Please note that the Rspamd setup does NOT change at all, and the checks
will not abort the setup in case they fail. A simple warning is emmited.
* add more documentation to Rspamd functions
* Apply suggestions from code review
* improve `__do_as_rspamd_user`
* rework check similar to review suggestion
see https://github.com/docker-mailserver/docker-mailserver/pull/3627#discussion_r1388697547
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* update K8s deployment
Because `allowPrivilegeEscalation` controls SUID/SGID, we require it
when postdrop is invoked.
* correct permissions for maildrop/public
The reason our permissions previously worked out as that in setups where
SUID/SGID worked, the binaries used to place files in these directories
already have SGID set; the current set of permissions makes less sense
(as explained in this comment:
https://github.com/docker-mailserver/docker-mailserver/issues/3619#issuecomment-1793816412)
Since the binaries used to place files inside these directories alredy
have SUID/SGID set, we do not require these bits (or the sticky bit) to
be set on the directories.
* Apply suggestions from code review
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
- Make this easier to find when browsing the example environment file.
- Adjust ENV documentation to properly mark the actual default value.
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* Dovecot: add deb package dovecot-lua to support Lua scripting
* Adding documentation for Lua authentication
* Updated documentation and made a better distinction between Dovecot packages for officially supported features and for community supported features.
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* improvide docs about how to work with logs
Most importantly,
1. I added information on the recently adopted `less` / `nano`
2. I added information about `/var/log/mail/`
* fix typos
* Apply suggestions from code review
* Update docs/content/config/debugging.md
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* outsource Rspamd ENVs into explicit helper
This will allow us to uniformly source the helper and get the values
from everywhere consistently. This is more than desirable since we will
be using these values not only for the Rspamd setup, but also for DKIM
management and during change-detection.
* integrate Rspamd into changedetection
We outsource one more function to reside in the helper script for Rspamd
so that we can call this function from the Rspamd setup and from the
changedetection functionality too.
* realize deprecation of old commands file for Rspamd
THIS IS A BREAKING CHANGE!
This change realizes the log message: "Using old file location now
(deprecated) - this will prevent startup in v13.0.0" Startup will now
fail.
* added '--force' option to Rspamd DKIM script
* use new helper to get ENVs for Rspamd in DKIM script
* remove the need for linking directories
This was unnecessary, as explained in
https://github.com/docker-mailserver/docker-mailserver/pull/3597#discussion_r1369413599
* Apply suggestions from code review
review by @polarathene
* apply more review feedback from @polarathene
- <https://github.com/docker-mailserver/docker-mailserver/pull/3599#discussion_r1370885519>
- <https://github.com/docker-mailserver/docker-mailserver/pull/3599#discussion_r1370904201>
* update documentation
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Instead of using `etc/rspamd/override.d/dkim_signing.conf`, we will now
be using `/tmp/docker-mailserver/rspamd/override.d/dkim_signing.conf`.
The new location is persisted (and linked again during startup) and
hence better suited.
* simplify `_setup_logrotate`
* adjust Rspamd's log file and improve it's management
* add information to docs about Rspamd log
* update log query helper to allow another file location
* bail in case `LOGROTATE_INTERVAL` is invalid
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Some deployment scenarios are not compatible with `5000:5000` static vmail user with `/var/mail`. This feature allows adjusting the defaults to a UID / GID that is compatible.
Signed-off-by: vincent <vincent@ducamps.win>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Instead of exit status of `124` (_signifies timeout_), it should fail with `1` (failure) like the others. Handled via using `_run_in_container_bash()` (_`timeout` failure `124` does not propagate and is treated as `1` instead_).
In this case we are waiting on the status of the mail being sent, the pattern provided to `grep` is too specific and results in a timeout. Instead since we only expect the one log entry, match any status and assert the expected pattern afterwards.
This provides a more helpful failure output that informs us that mail was at least processed by Postfix, but the sent status is not what we expected.
### Before
```
✗ [ENV] (POSTFIX_DAGENT) delivers mail to existing account [60327]
(from function `assert_success' in file test/test_helper/bats-assert/src/assert_success.bash, line 42,
in test file test/tests/parallel/set3/mta/lmtp_ip.bats, line 47)
`assert_success' failed
-- command failed --
status : 124
output :
--
```
### After
```
✗ [ENV] (POSTFIX_DAGENT) delivers mail to existing account [1425]
(from function `assert_output' in file test/test_helper/bats-assert/src/assert_output.bash, line 178,
in test file test/tests/parallel/set3/mta/lmtp_ip.bats, line 48)
`assert_output --regexp "${MATCH_LOG_LINE}=sent .* Saved)"' failed
-- regular expression does not match output --
regexp : postfix/lmtp.* status=sent .* Saved)
output : Sep 28 04:12:52 mail postfix/lmtp[721]: 23701B575: to=<user1@localhost.localdomain>, relay=127.0.0.1[127.0.0.1]:24, delay=0.08, delays=0.07/0/0.01/0, dsn=4.2.0, status=deferred (host 127.0.0.1[127.0.0.1] said: 451 4.2.0 <user1@localhost.localdomain> Internal error occurred. Refer to server log for more information. [2023-09-28 04:12:52] (in reply to end of DATA command))
--
```
The expected pattern is logged as `assert_success` confirms a valid match for the log line of interest was found, and we have the mismatched value to debug the failure against.
This was missed during original review.
On a linux host, processes running within a container have been visible via commands like `pgrep`. This is does not appear to be the case with WSL2 + Docker Desktop (Windows), resulting in test failure.
The command should have been run from within the container regardless.
* Update update-and-cleanup.md
spotify dockergc is UNMAINTAINED, they advice to consider using the `docker system prune` command instead.
"This repository has been archived by the owner on Feb 2, 2021. It is now read-only."
https://github.com/spotify/docker-gc
* Revise `update-and-cleanup.md`
Merges the image update + cleanup sections.
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* chore: Use `.yml` extension
Both of these files support the `.yml` extension. Normalize on that.
* fix: Add `.gitattributes` to ensure `LF` line-endings are committed
Avoids accidentally committing files with `CRLF` when they're created on Windows. Or worse, if some editors don't detect `LF` and would introduce mixed line-endings with `CRLF`.
Shouldn't be a problem in practice as we already have a linting check to catch this via CI during PRs. This file is complimentary, in that it should automate that concern away.
The subnet must be specified as part of `ipam.configs`.
This was unfortunately slightly incorrect due to a mistake in the official Docker docs being propagated, which has since been fixed upstream.
Refer to the official Compose Spec for more details:
* https://docs.docker.com/compose/compose-file/06-networks/#ipam
* chore: Drop management of `SASLAUTHD_*` ENV
- `variables-stack.sh` does not need to manage all these extra ENV or store them. They're not used anywhere else.
- `saslauthd.sh` is the only consumer of these ENV which are effectively direct key/value mappings, with some defaults provided / inherited.
Instead of trying to conditionally support key/value pairs when ENV is set, we could instead use `sed` to delete lines with empty values.
* chore: Drop fallbacks + update configs to match docs
- Drop deprecated support:
- `DOVECOT_HOSTS` is an ENV deprecated since v10.
- Fallback for missing URI scheme introduced for Dovecot and SASLAuthd in v10.
- Adding error log message when no LDAP URI scheme is detected for the supported ENV (when set).
- Docs updated for ENV to reflect the mandatory requirement. `mailserver.env` partially synced equivalent sections.
- Provided base LDAP configs (for overriding) likewise updated from `domain.com` to `example.com`.
- LDAP test updated for required `ldap://` URI scheme. Common ENV shared across LDAP configs hoisted out of the Postfix group.
* chore: Remove unset lines in generated `saslauthd.conf`
* chore: Use white-space in query filters to improve readability
* tests: LDAP ENV query filters documented
- These filters remain roughly the same as they were before. The conditions are the same, but restructured to make the complimentary constraints more separated from the actual target attribtues.
- The DOMAIN query additionally includes the `mailAlias` from `PostfixBookMailAccount` class as well.
- Heavy inline documentation breaking down how the filters work for any maintainer to reference. This will likely be migrated after revision into our user docs for LDAP. Some quirks have also been noted with advice for future changes.
* tests: LDAP - Support test-case specific containers
A bit more complicated than other test files due to the larger ENV config array that most containers may need to share.
Example introduced with the test-case checking custom config file support.
* tests: Adjust LDAP test configs
- Paths for `.ldif` files used with volumes shortened
- Postfix LDAP `.cf` files adjusted to conventions used in LDAP tests.
- Deprecation startup script check is kept for `ENABLE_LDAP=1` but adjusted to emit an error instead. It can be dropped in a future release. Just a precaution for those who mistakenly update (_possibly via automation_) without checking the release notes, an error log is somewhat helpful, although it could alternatively panic?
- Docs updated to remove the `ENABLE_LDAP=1` usage
- ENV docs updated to reference a maintained LDAP image.
- Changelog includes the breaking change, and slight revision to prior release mention of deprecation.
- The `uniqueIdentifier` attribute is not appropriate and was relying on `objectClass: extensibleObject` as a workaround to allow it. A more appropriate attribute to use instead is `userID` (_short name: `uid`_).
- Removing `extensibleObject` now requires switching the user accounts to use `inetOrgPerson` class (_which inherits from `organizationalPerson`_). which allows the attributes `givenName`, `userID` and `mail` (_also provided via the `PostfixBookMailAccount` class_).
- The LDAP root object now uses `dc` attributes for `example.test` instead of `localhost.localdomain`. This has nothing to do with DMS or LDAP containers networking config, nor the users mail addresses.
- Users are now grouped under the organizational unit of `users` instead of `people`. Purely a naming change out of preference, no functional difference.
The LDAP test ENV has been updated to accommodate the above changes. An additional ENV override was required for SASLAuthd to switch an attribute set for `ldap_filter` in `/etc/saslauthd.conf` from the implicit default of `uniqueIdentifier` (_that we set during startup as an ENV default for fallback_) to the `userID` attribute.
* chore: Adjust default DKIM size (`open-dkim`) from 4096-bit to 2048-bit
4096-bit is excessive in size for DKIM key. 2048-bit is plenty.
* chore: Additional revisions to `open-dkim` command help output
- The examples use `keysize 2048`, but as that's the new default it makes sense to change that.
- Other help text was also revised.
- Last example for domains did not need to demonstrate the other options. Changed example domains to more appropriate values.
* docs: Revise DKIM docs
Primarily for the change in default key size, but does revise some text to better communicate to the user.
- While the referenced RFC advises 512-bit to 2048-bit key size, we now explicitly discourage `512-bit` as it's not secure. `1024-bit` is still likely safe for most, but `2048-bit` is a good default for those not rotating their keys.
- Adjusted the domains example to match the new `setup config dkim domain` domains example.
- Tip for changing default key size changed to "info" with added clarity of lowering security or increasing it (excessively).
- Rspamd section is minor formatting changes, with the exception of clarifying the "main domain" for the mail accounts is assumed as the DMS FQDN with any subdomain (like `mail.`) stripped away. This is not great, but a legacy issue that needs to be addressed in future.
- `docs-rspamd-override-d` ref removed, and usage replaced with equivalent ref `docs-rspamd-config-dropin`, while `docs-rspamd-config-declarative` ref was not in use and also removed.
- Revised the `<selector>.txt` DNS formatting info section to better communicate with the reader. Additionally it had mixed usage of default `mail` and custom `dkim-rsa` selectors (_file content and output_).
* docs: Sync DKIM commands help messages and update DKIM docs for LDAP
- Adopt the help options format style from the `rspamd-dkim` into `open-dkim` command. And convert `./setup.sh` to `setup`. `selector` option has been implemented. for a while now.
- Update `rspamd-dkim` examples help output to align with `open-dkim` command examples.
- Give both DKIM command tools a consistent description. The two tools differ in support for the `domain` option (_implicit domain sourcing for default account provisioner, and support for multiple domains as input_).
- DKIM docs for LDAP domain support revised to better communicate when explicit domain config is necessary.
* tests: Adjust test-cases for `setup config dkim` change
`rspamd_dkim.bats`:
- Update assert for command help output.
- Don't bother creating a DKIM key at 512-bit size.
`setup_cli.bats`:
- Update assert for command help output of the `setup config dkim` (OpenDKIM) command.
* docs: Update DKIM section for large keys to newer RFC
The linked discussion from 2021 does mention this updated RFC over the original. That removes outdated advice about `512-bit` key length support.
The discussion link is still kept to reference a comment for the reader to better understand the security strength of 2048-bit RSA keys and why larger keys are not worthwhile, especially for DKIM.
* docs: Extract out common DKIM generation command from content tabs
Should be fine to be DRY here, not specific to `open-dkim` or `rspamd` generation/support. Previously rspamd lacked support of an equivalent command in DMS.
* docs: DKIM refactoring
- Shifted out the info admonition on key size advice out of the content tabs as it's now generic information.
- Indented the 4096-bit warning into this, which is less of a concern as the default for our DKIM generation tools is consistently 2048-bit now.
- Reworked the LDAP and Rspamd multi-domain advice. To avoid causing a bad diff, these sections haven't been moved/merged yet.
* docs: Revise DKIM docs
Advice for managing domains individually with LDAP and Rspamd extracted out of the content tabs. Default domain behaviour explained with extra info about OpenDKIM + FILE provisioner sourcing extra domains implicitly.
* ci: Revise `question.yml` to better clarify the issue tracker is not for support queries
Users have been making low effort reports (_bypassing the dedicated form_) through this alternative that is intended for addressing other concerns related to the project - not troubleshooting user problems.
When a user does not want to put the effort in of a full bug report (_and following our debug docs tips that it refers them to_), they should be using the Github Discussions page which provides the same free-form input, but should not require attention of project devs (contributors / maintainers).
---
The markdown rendered field above the "Description" input field didn't seem too relevant for this template. I've opted for a markdown comment (so it won't render if kept) into the input field with hopes that'll be more visible to the readers attention.
* chore: Fix typo
**TL;DR:**
- New image is actively maintained vs existing one that is over 5 years old.
- Slight improvement to LDAP tree config via `.ldif` files.
- No more `Dockerfile` required to build, we can just rely on `docker run`.
`osixia/openldap` has not seen any activity since Feb 2021, while our `Dockerfile` was fixed to v1.1.6` (Feb 2018).
Startup time for this new image is around 5 seconds? (_The LDAP test uses a standard 20 second timeout check to wait until the server is ready before continuing with starting the DMS image_).
This commit migrates to `bitnami/openldap` which required modifying the `01_mail-tree.ldif` to also include adding the root object to start successfully. This image is actively maintained and one of the most popular OpenLDAP images on DockerHub.
The user account `.ldif` files have minimal changes:
- Lines moved around for better organization
- Additional comments for context
- Removal of inherited `objectClass` attributes (`person`, `top`) from the `orgnizationalPerson` class. Attribute `sn` changed to long form `surname` and values corrected with `givenName`. `changetype: add` was also not necessary.
Additionally the image does not support the `.schema` format, they must be converted to `.ldif` which has been done for `postfix-book.schema`.
See PR for more details.
