* simplify `_setup_logrotate`
* adjust Rspamd's log file and improve it's management
* add information to docs about Rspamd log
* update log query helper to allow another file location
* bail in case `LOGROTATE_INTERVAL` is invalid
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* remove PostSRSD wrapper
The setup is now completely done during _actual_ setup phase. The
wrapper did not even catch signals (SIGINT, etc.), which I think is
strange.
I also added all the ENVs the wrapper relied on (which previously could
have been unset) to the variables script.
* forgot adjusting the `Dockerfile`
`postfix start-fg` was not properly responding to signals received to stop. This caused `supervisorctl restart postfix` and `supervisor stop postfix` to not work as expected (_stopping the Postfix master process, before attempting to start the service again_).
Supervisor does not support custom commands for restarting or stopping a service, relying only on managing the process via a signal. In the past we used a wrapper script to TRAP the signals and trigger commands that way.
However there is a feature which allows us to proxy signals to a different process by referencing a PID file. As Postfix master process creates a pid file when started, we can avoid a wrapper script and the `supervisorctl` functionality works as intended 👍
* chore: Remove the wrapper script for `fail2ban`
- This does not appear necessary. The server can be run with foreground mode.
- `daemons-stack.sh` removal of the socket can be handled by the fail2ban server when using the `-x` option.
* chore: Remove `touch /var/log/auth.log`
These were both added as supposed fixes in 2016 for the then Ubuntu 2014 base image.
Removing them causes no failures in tests.
* fix: Install optional python packages for `fail2ban`
These have barely any overhead in layer weight. The DNS package may provide some QoL improvements, while the `pyinotify` is a better alternative than polling logs to check for updates.
We have `gamin` package installed but `fail2ban` would complain in the log that it was not able to initialize the module for it. There only appears to be a `python-gamin` dependent on EOL python 2, no longer available from Debian Bullseye.
* added options to toggle OpenDKIM & OpenDMARC
rspamd can provide DKIM signing and DMARC checking itself, so users
should be able to disable OpenDKIM & OpenDMARC. The default is left at
1, so users have to to opt-in when the want to disable the features.
* misc small enhancements
* adjusted start of rspamd
The order of starting redis + rspamd was reversed (now correct) and
rspamd now starts with the correct user.
* adjusted rspamd core configuration
The main configuration was revised. This includes AV configuration as
well as worker/proxy/controller configuration used to control the main
rspamd processes.
The configuration is not tested extensively, but well enough that I am
confident to go forward with it until we declare rspamd support as
stable.
* update & improve the documentation
* add tests
These are some initial tests which test the most basic functionality.
* tests(refactor): Improve consistency and documentation for test helpers (#3012)
* added `ALWAYS_RUN` target `Makefile` recipies (#3013)
This ensures the recipies are always run.
Co-authored-by: georglauterbach <44545919+georglauterbach@users.noreply.github.com>
* adjusted rspamd test to refactored test helper functions
* improve documentation
* apply suggestions from code review (no. 1 by @polarthene)
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* streamline heredoc (EOM -> EOF)
* adjust rspamd test (remove unnecessary run arguments)
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* chore: Co-locate process checking and process restart verification
Extract the test cases for checking a process is running and properly restarts from various test files into a single one:
Core (always running):
opendkim, opendmarc, master (postfix)
ENV dependent:
amavi (amavisd-new), clamd, dovecot, fail2ban-server (fail2ban), fetchmail, postgrey, postsrsd, saslauthd
These now run off a single container with the required ENV and call a common function (the revised version in parallel test cases).
* fix(saslauthd): Quote wrap supervisor config vars
`saslauth.conf` calls `-O` option for most commands defined with an ENV that may be empty/null. This would cause the process to silently fail / die.
This doesn't happen if quote wrapping the ENV, which calls `-O` with an empty string.
Not necessary, but since one of `postgrey` ENV were quote wrapped in `supervisor-app.conf`, I've also done the same there.
* fix(postsrsd): Change supervisor `autorestart` policy to `true`
The PR that introduced the config switched from `true` to `unexpected` without any context. That prevents restart working when the process is killed. Setting to `true` instead will correctly restart the service.
* chore: Remove disabled postgrey test file
`mail_with_postgrey_disabled_by_default.bats` only checked the migrated test cases, removed as no longer serving a purpose.
* tests(refactor): Make `_should_restart_when_killed()` more reliable
The previous version did not ensure that the last checks process was actually restarted, only that it was running.
It turns out that `pkill` is only sending the signal, there can be some delay before the original process is actually killed and restarted.
This can be identified with `pgrep --older <seconds>`. First ensure the process is at a specified age, then after killing check that the process is not running that is at least that old, finally check that there is a younger process actually running.. (_could fail if a process doesn't restart, or there is a delay such as imposed by `sleep` in wrapper scripts for postfix and fail2ban_)
The helper method is not used anywhere else now, move it into this test instead. It has been refactored to accomodate the needs for `--older`, and `--list-full` provides some output that can be matched (similar for `pkill --echo`).
* test(docs): Add inline notes about processes
* chore: Compress test cases into single case with loop
Moves the list of processes into array vars to iterate through instead.
If a failure occurs, the process name is visible along with line number in `_should_restart_when_killed()` to identify what went wrong.
* chore: Handle `FETCHMAIL_PARALLEL=1` process checks as well
* tests: Add test case for disabled ENV
Additional coverage to match what other test files were doing before, ensuring that these ENV can prevent their respective service from running.
* chore: Move `clamd` enabled check to it's own test case
Not sure about this.
It reduces the time of CPU activity (sustained full load on a thread) and increase in memory usage (1GB+ loading signatures database), but as a separate test case it also adds 10 seconds without reducing the time of the test case it was extracted from.
* chore: Make `disabled` variant the 1st test case
* fix: Adjust test cases to pass when using slower wrapper scripts
* tests(refactor): `mail_fetchmail.bats` updated to new format
Additionally merges in the parallel test file.
* chore: Move `config/fetchmail.cf` into separate sub-directory
Keep out of the default base config for tests.
* chore: Change `fetchmail.cf` FQDNs to `.test` TLD
Changed the first configs remote and local user values to more clearly document what their values should represent (_and that they don't need to be a full mail address, that's just what our Dovecot is configured with for login_).
Shifted the `here` to the end of the `is` line. It's optional syntax, only intended to contrast with the remote `there` for readability.
Additionally configured imap protocol. Not tested or verified if that's correct configuration for usage with imap protocol instead. The fetchmail feature tests are currently lacking.
Added an inline doc into the fetchmail test to reference a PR about the importance of the trailing `.` in the config. Updated the partial matching to ensure it matches for that in the value as well.
* chore: Finalize `process-check-restart.bats`
Few minor adjustments. The other ENV for clamd doesn't seem to provide any benefit, trim out the noise. Added a note about why it's been split out.
Fetchmail parallel configs are matching the config file path in the process command that is returned. The `.rc` suffix is just to add further clarity to that.
* mail binary
* initial work
* make env vars available
* typo
* some fixes
* make script ugly, to satisfy linter..
* mailserver.env updated
* Version to welcome message added
* remove VERSION file references
* VERSION --> DMS_VERSION
* fetch remote version
* variable usage
* Quoting added
* edge test & docu
* dash removed
* subject changed
* re-add VERSION
* VERSION added
* new file: VERSION
* rewrite
* unnecessary additions from fail2ban PR removed
* UPDATE_CHECK_INTERVAL added
* syntax check & _log function
* comment added
* final commit
* fix for issue #747 (NOT TESTED YET)
Need to test this. Dont merge it yet.
* Small Cleanup and bug fixes Not done Yet!
Not done yet. Dont merge. See comment in issue #747
* Add --ignore-missing. Now is fixed.
* Enable user definable fetchmail poll times
* create new ENV variable FETCHMAIL_POLL in target/start-mailserver.sh
* change --daemon setting in supervisor-app.conf to use ENV var
* Put FETCHMAIL_POLL env variable in Dockerfile to handle case where
user does not specify it in their docker-compose.yml
* installed supervisor. Still need to set tasks to run in foreground.
* setting programs to run in foreground
* seems to work now
* cleanup
* final fixes
* tests
* show startup output on stdout
* set Dovecot config files before starting it
* make all processes log to console
* Use the supervisor as the main process. The start-mailserver is started
from the supervisord and then this process triggers others.
Defined some default variable in the Dockerfile. In order for
supervisored to build the command lines the ENV variable need to be set.
Therefore the defaults are defined.
Some processes are not single processes like postfix and fail2ban and
they have a wrapper. The wrapper takes care of proper shutdown and checking
if the process is running or not. Supervisored will restart the wrapping
script if the process is gone.
Increased some delays between tests because sometimes they where to short
for all containers to be running.
* Remove obsolete comments, reset timeout value to old one, added new lines
* Add more time for analyzing the emails.
Sometimes it fails the tests and gives a wrong state about
the test. During testing 40 seconds was the safe value.
