* fix: Source `VERSION` from image ENV
Now CI builds triggered from tagged releases will always have the correct version. No need for manually updating a separate file.
* fix: Query latest GH release tag
Compare to the remote GH release tag published, rather than contents of a `VERSION` file.
`VERSION` file remains in source for now as prior releases still rely on it for an update notification.
* chore: Switch from `yq` to `jaq`
- Can more easily express a string subslice.
- Lighter weight: 9.3M vs 1.7M.
- Drawback, no YAML input/output support.
If `yq` is preferred, the `v` prefix could be removed via BASH easily enough.
* chore: Add entry to `CHANGELOG.md`
* ci: `VERSION` has no relevance to `:edge`
* docs: Update build guide + simplify `make build`
---------
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Previously, we did not run the workflow on push on `master` when a
release happened because the push on master is guarded by a check on
which files were changed.
With this change, I added `VERSION` to the list of files to consider
when updating `:edge`.
* added check for Rspamd DKIM on startup
The newly added function `__rspamd__check_dkim_permissions` performs a
check on DKIM private key files. This is useful to prevent issues
like #3621 in the future. The function is deliberately kept simple and
may not catch every single misconfiguration in terms of permissions and
ownership, but it should be quite accurate.
Please note that the Rspamd setup does NOT change at all, and the checks
will not abort the setup in case they fail. A simple warning is emmited.
* add more documentation to Rspamd functions
* Apply suggestions from code review
* improve `__do_as_rspamd_user`
* rework check similar to review suggestion
see https://github.com/docker-mailserver/docker-mailserver/pull/3627#discussion_r1388697547
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* update K8s deployment
Because `allowPrivilegeEscalation` controls SUID/SGID, we require it
when postdrop is invoked.
* correct permissions for maildrop/public
The reason our permissions previously worked out as that in setups where
SUID/SGID worked, the binaries used to place files in these directories
already have SGID set; the current set of permissions makes less sense
(as explained in this comment:
https://github.com/docker-mailserver/docker-mailserver/issues/3619#issuecomment-1793816412)
Since the binaries used to place files inside these directories alredy
have SUID/SGID set, we do not require these bits (or the sticky bit) to
be set on the directories.
* Apply suggestions from code review
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
- Make this easier to find when browsing the example environment file.
- Adjust ENV documentation to properly mark the actual default value.
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* Dovecot: add deb package dovecot-lua to support Lua scripting
* Adding documentation for Lua authentication
* Updated documentation and made a better distinction between Dovecot packages for officially supported features and for community supported features.
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* improvide docs about how to work with logs
Most importantly,
1. I added information on the recently adopted `less` / `nano`
2. I added information about `/var/log/mail/`
* fix typos
* Apply suggestions from code review
* Update docs/content/config/debugging.md
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* outsource Rspamd ENVs into explicit helper
This will allow us to uniformly source the helper and get the values
from everywhere consistently. This is more than desirable since we will
be using these values not only for the Rspamd setup, but also for DKIM
management and during change-detection.
* integrate Rspamd into changedetection
We outsource one more function to reside in the helper script for Rspamd
so that we can call this function from the Rspamd setup and from the
changedetection functionality too.
* realize deprecation of old commands file for Rspamd
THIS IS A BREAKING CHANGE!
This change realizes the log message: "Using old file location now
(deprecated) - this will prevent startup in v13.0.0" Startup will now
fail.
* added '--force' option to Rspamd DKIM script
* use new helper to get ENVs for Rspamd in DKIM script
* remove the need for linking directories
This was unnecessary, as explained in
https://github.com/docker-mailserver/docker-mailserver/pull/3597#discussion_r1369413599
* Apply suggestions from code review
review by @polarathene
* apply more review feedback from @polarathene
- <https://github.com/docker-mailserver/docker-mailserver/pull/3599#discussion_r1370885519>
- <https://github.com/docker-mailserver/docker-mailserver/pull/3599#discussion_r1370904201>
* update documentation
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Instead of using `etc/rspamd/override.d/dkim_signing.conf`, we will now
be using `/tmp/docker-mailserver/rspamd/override.d/dkim_signing.conf`.
The new location is persisted (and linked again during startup) and
hence better suited.
* simplify `_setup_logrotate`
* adjust Rspamd's log file and improve it's management
* add information to docs about Rspamd log
* update log query helper to allow another file location
* bail in case `LOGROTATE_INTERVAL` is invalid
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Some deployment scenarios are not compatible with `5000:5000` static vmail user with `/var/mail`. This feature allows adjusting the defaults to a UID / GID that is compatible.
Signed-off-by: vincent <vincent@ducamps.win>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Instead of exit status of `124` (_signifies timeout_), it should fail with `1` (failure) like the others. Handled via using `_run_in_container_bash()` (_`timeout` failure `124` does not propagate and is treated as `1` instead_).
In this case we are waiting on the status of the mail being sent, the pattern provided to `grep` is too specific and results in a timeout. Instead since we only expect the one log entry, match any status and assert the expected pattern afterwards.
This provides a more helpful failure output that informs us that mail was at least processed by Postfix, but the sent status is not what we expected.
### Before
```
✗ [ENV] (POSTFIX_DAGENT) delivers mail to existing account [60327]
(from function `assert_success' in file test/test_helper/bats-assert/src/assert_success.bash, line 42,
in test file test/tests/parallel/set3/mta/lmtp_ip.bats, line 47)
`assert_success' failed
-- command failed --
status : 124
output :
--
```
### After
```
✗ [ENV] (POSTFIX_DAGENT) delivers mail to existing account [1425]
(from function `assert_output' in file test/test_helper/bats-assert/src/assert_output.bash, line 178,
in test file test/tests/parallel/set3/mta/lmtp_ip.bats, line 48)
`assert_output --regexp "${MATCH_LOG_LINE}=sent .* Saved)"' failed
-- regular expression does not match output --
regexp : postfix/lmtp.* status=sent .* Saved)
output : Sep 28 04:12:52 mail postfix/lmtp[721]: 23701B575: to=<user1@localhost.localdomain>, relay=127.0.0.1[127.0.0.1]:24, delay=0.08, delays=0.07/0/0.01/0, dsn=4.2.0, status=deferred (host 127.0.0.1[127.0.0.1] said: 451 4.2.0 <user1@localhost.localdomain> Internal error occurred. Refer to server log for more information. [2023-09-28 04:12:52] (in reply to end of DATA command))
--
```
The expected pattern is logged as `assert_success` confirms a valid match for the log line of interest was found, and we have the mismatched value to debug the failure against.
This was missed during original review.
On a linux host, processes running within a container have been visible via commands like `pgrep`. This is does not appear to be the case with WSL2 + Docker Desktop (Windows), resulting in test failure.
The command should have been run from within the container regardless.
* Update update-and-cleanup.md
spotify dockergc is UNMAINTAINED, they advice to consider using the `docker system prune` command instead.
"This repository has been archived by the owner on Feb 2, 2021. It is now read-only."
https://github.com/spotify/docker-gc
* Revise `update-and-cleanup.md`
Merges the image update + cleanup sections.
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* chore: Use `.yml` extension
Both of these files support the `.yml` extension. Normalize on that.
* fix: Add `.gitattributes` to ensure `LF` line-endings are committed
Avoids accidentally committing files with `CRLF` when they're created on Windows. Or worse, if some editors don't detect `LF` and would introduce mixed line-endings with `CRLF`.
Shouldn't be a problem in practice as we already have a linting check to catch this via CI during PRs. This file is complimentary, in that it should automate that concern away.
