* chore: Set `TLS_INTERMEDIATE_SUITE` to only use TLS 1.2 ciphersuites
Removes support of the following cipher suites that are only valid for TLS 1.0 + 1.1:
- `ECDHE-ECDSA-AES128-SHA`
- `ECDHE-RSA-AES128-SHA`
- `ECDHE-ECDSA-AES256-SHA`
- `ECDHE-RSA-AES256-SHA`
- `DHE-RSA-AES128-SHA`
- `DHE-RSA-AES256-SHA`
* chore: Update TLS version min and ignore settings
These are now the same as modern settings.
* fix: Remove min TLS support workaround
No longer required now that outdated TLS versions have been dropped.
* tests: Remove support for TLS 1.0 and 1.1 ciphersuites
* tests: Remove support for TLS 1.0 and 1.1 ciphersuites (Port 25)
The removed SHA1 cipher suites are still supported in TLS 1.2, thus they've been excluded for port 25 via the `SHA1` exclusion pattern in `main.cf`.
With `reload` a change detection event during local testing can be processed in less than a second according to logs. Previously this was 5+ seconds (_plus additional downtime for Postfix/Dovecot to become available again_).
In the past it was apparently an issue to use `<service> reload` due to a concern with the PID for wrapper scripts that `supervisorctl` managed, thus `supervisorctl <service> restart` had been used. Past discussions with maintainers suggest this is not likely an issue anymore, and `reload` should be fine to switch to now 👍
---
**NOTE:** It may not be an issue in the CI, but on _**local systems running tests may risk failure in `setup-cli.bats` from a false positive**_ due to 1 second polling window of the test helper method, and a change event being possible to occur entirely between the two checks undetected by the current approach.
If this is a problem, we may need to think of a better way to catch the change. The `letsencrypt` test counts how many change events are expected to have been processed, and this could technically be leveraged by the test helper too.
---
**NOTE:** These two lines (_with regex pattern for postfix_) are output in the terminal when using the services respective `reload` commands:
```
postfix/master.*: reload -- version .*, configuration /etc/postfix
dovecot: master: Warning: SIGHUP received - reloading configuration
```
I wasn't sure how to match them as they did not appear in the `changedetector` log (_**EDIT:** they appear in the main log output, eg `docker logs <container name>`_).
Instead I've just monitored the `changedetector` log messages, which should be ok for logic that previously needed to ensure Dovecot / Postfix was back up after the `restart` was issued.
---
Commit history:
* chore: Change events `reload` Dovecot and Postfix instead of `restart`
Reloading is faster than restarting the processes.
Restarting is a bit heavy handed here and may no longer be necessary for general usage?
* tests: Adapt tests to support service `reload` instead of `restart`
* chore: Additional logging for debugging change event logs
* fix: Wait on change detection, then verify directory created
Change detection is too fast now (0-1 seconds vs 5+).
Directory being waited on here was created near the end of a change event, reducing that time to detect a change by the utility method further.
We can instead check that the directory exists after the change detection event is completed.
* chore: Keep using the maildir polling check
We don't presently use remote storage in tests, but it might be relevant in future when testing NFS.
This at least avoids any confusing failure happening when that scenario is tested.
As per deprecation notice from v11.3 release notes, and a related prior PR; this ENV is to be removed.
It's no longer considered useful, and none of the tests that configured it were actually using it for relaying anything.
## Pull Request
### ci: Run tests in parallel (part 1)
- Tests can now be arbitrarily grouped into sub-directories.
- Some tests are now run in parallel.
- CI will now spawn 4 jobs to run the whole test suite in parallel.
## Individual Commits
### tests(chore): Rename test files to serial and parallel types
- `test_helper.bats` needs more work than this PR provides to be compatible with parallel tests, so must remain as a serial test for now.
- `spam_bounced.bats` had failures as a serial test, but works well converted to a parallel test in a future commit.
### tests(CI): Adjust Makefile & GHA workflow to support new test layout
These updates support running tests that have been relocated into `serial` and `parallel/set*` directories.
- `make tests` now calls the two make targets beneath it. The only difference is that `serial` continues the "1 test at a time" approach used prior to this PR, while the `parallel` target increases the `--jobs` arg to run multiple tests concurrently (_configured by `PARALLEL_JOBS`_).
- The `test/%` target leverages Bash syntax magic to ease running single tests without providing the exact path.
- This syntax also supports providing multiple test names (eg: `make test/clamav,template`) to run.
- `**` (globstar) allows for future improvements that can group multiple test files into sub-directories by their scope (eg: anti-spam, ssl, etc).
---
chore: Add `shopt -s globstar` to other targets
I realized that other targets should have this as well in case it is not set.
It is better to be more explicit here than to have weird errors due to `**` not expanding properly.
---
fix(Makefile): Add back `.PHONY` targets
I encountered `make` telling me the target was already up-to-date, which of course is nonsense.
I therefore added back the `.PHONY` targets to ensure tests are always run.
---
docs: Added instructions for running a single test
See https://github.com/docker-mailserver/docker-mailserver/pull/2857/files#r1008582760
### tests(chore): Use `REPOSITORY_ROOT` export var from Makefile
Allows for using `load` with an absolute path instead of a relative one, which makes it possible to group tests into different directories.
Parallel tests differ slightly, loading the newer `helper/common.bash` and `helper/setup.bash` files instead of the older `test_helper/common.bash` which serial tests continue to use.
### tests(refactor): `common.bash` helper split into two files
The current `test/test_helper/common.bash` was getting large. Setup logic has been extracted out into a new file.
`common.bash` resides in a directory named `test_helper/`, the `test_` prefix is redundant.
As an interim solution this provides a new approach for the updated tests, while the "old" tests can use the "old" `common.bash`. Eventually all tests should migrate to the new approach in `helper/` instead of the older `test_helper/`.
The new helper files are located under `test/helper/` (_which drops the `test_` prefix_). The new and updated helpers apply the new naming convention for ENV variables (_such as `CONTAINER_NAME` or `IMAGE_NAME`_).
---
Some refactoring occurred, including new methods like `_run_in_container()` and `_default_teardown()`.
---
I encountered a situation before in which the updated tests would fail because there were collisions of ENV names in the tests (_for example with `CONTAINER_NAME`_).
### tests(refactor): Conversion to parallel tests and use revised helpers
- Introduced `CONTAINER_NAME` and `TEST_NAME_PREFIX` as new vars for better managing test consistency (DRY).
- `CONTAINER_NAME` replaces any repeated container name with the variable. The value will differ slightly as the prior prefix (`mail_`) has been changed to `dms-test-`.
- `TEST_NAME_PREFIX` provides a prefix value for each `@test` description string.
---
chore: Add a reference template for tests
- Introduced `CONTAINER_NAME` and `TEST_NAME_PREFIX` as new vars for better managing test consistency (DRY).
- `CONTAINER_NAME` replaces any repeated container name with the variable. The value will differ slightly as the prior prefix (`mail_`) has been changed to `dms-test-`.
- `TEST_NAME_PREFIX` provides a prefix value for each `@test` description string.
---
chore: Add a reference template for tests
The current `test/test_helper/common.bash` was getting large. Setup logic has been extracted out into a new file.
`common.bash` resides in a directory named `test_helper/`, the `test_` prefix is redundant.
As an interim solution this provides a new approach for the updated tests, while the "old" tests can use the "old" `common.bash`. Eventually all tests should migrate to the new approach in `helper/` instead of the older `test_helper/`.
The new helper files are located under `test/helper/` (_which drops the `test_` prefix_). The new and updated helpers apply the new naming convention for ENV variables (_such as `CONTAINER_NAME` or `IMAGE_NAME`_).
---
Some refactoring occurred, including new methods like `_run_in_container()` and `_default_teardown()`.
---
I encountered a situation before in which the updated tests would fail because there were collisions of ENV names in the tests (_for example with `CONTAINER_NAME`_).
Allows for using `load` with an absolute path instead of a relative one, which makes it possible to group tests into different directories.
Parallel tests differ slightly, loading the newer `helper/common.bash` and `helper/setup.bash` files instead of the older `test_helper/common.bash` which serial tests continue to use.
These updates support running tests that have been relocated into `serial` and `parallel/set*` directories.
- `make tests` now calls the two make targets beneath it. The only difference is that `serial` continues the "1 test at a time" approach used prior to this PR, while the `parallel` target increases the `--jobs` arg to run multiple tests concurrently (_configured by `PARALLEL_JOBS`_).
- The `test/%` target leverages Bash syntax magic to ease running single tests without providing the exact path.
- This syntax also supports providing multiple test names (eg: `make test/clamav,template`) to run.
- `**` (globstar) allows for future improvements that can group multiple test files into sub-directories by their scope (eg: anti-spam, ssl, etc).
---
chore: Add `shopt -s globstar` to other targets
I realized that other targets should have this as well in case it is not set.
It is better to be more explicit here than to have weird errors due to `**` not expanding properly.
---
fix(Makefile): Add back `.PHONY` targets
I encountered `make` telling me the target was already up-to-date, which of course is nonsense.
I therefore added back the `.PHONY` targets to ensure tests are always run.
---
docs: Added instructions for running a single test
See https://github.com/docker-mailserver/docker-mailserver/pull/2857/files#r1008582760
- `test_helper.bats` needs more work than this PR provides to be compatible with parallel tests, so must remain as a serial test for now.
- `spam_bounced.bats` had failures as a serial test, but works well converted to a parallel test in a future commit.
Currently a change detection would be triggered and during processing, a CRLF is converted to LF, which updates the `postfix-accounts.cf` file and triggers another change event.
No need for the first approach to add an account, and it is the culprit for causing the CRLF to appear.
