docker-mailserver/test/mail_with_postgrey.bats

93 lines
4.8 KiB
Plaintext
Raw Normal View History

load 'test_helper/common'
function setup_file() {
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 00:53:30 +00:00
local PRIVATE_CONFIG
PRIVATE_CONFIG=$(duplicate_config_for_container .)
docker run -d --name mail_with_postgrey \
-v "${PRIVATE_CONFIG}":/tmp/docker-mailserver \
-v "$(pwd)/test/test-files":/tmp/docker-mailserver-test:ro \
-e ENABLE_DNSBL=1 \
-e ENABLE_POSTGREY=1 \
-e PERMIT_DOCKER=container \
-e POSTGREY_AUTO_WHITELIST_CLIENTS=5 \
-e POSTGREY_DELAY=15 \
-e POSTGREY_MAX_AGE=35 \
-e POSTGREY_TEXT="Delayed by Postgrey" \
-h mail.my-domain.com -t "${NAME}"
# using postfix availability as start indicator, this might be insufficient for postgrey
wait_for_smtp_port_in_container mail_with_postgrey
}
function teardown_file() {
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 00:53:30 +00:00
docker rm -f mail_with_postgrey
}
@test "checking postgrey: /etc/postfix/main.cf correctly edited" {
2021-01-31 15:05:05 +00:00
run docker exec mail_with_postgrey /bin/bash -c "grep 'zen.spamhaus.org, check_policy_service inet:127.0.0.1:10023' /etc/postfix/main.cf | wc -l"
assert_success
assert_output 1
}
@test "checking postgrey: /etc/default/postgrey correctly edited and has the default values" {
run docker exec mail_with_postgrey /bin/bash -c "grep '^POSTGREY_OPTS=\"--inet=127.0.0.1:10023 --delay=15 --max-age=35 --auto-whitelist-clients=5\"$' /etc/default/postgrey | wc -l"
assert_success
assert_output 1
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 00:53:30 +00:00
Final Migration Step (#6) * first migration steps * altered issue templates * altered README * removed .travis.yml * adjusting registry & repository, Dockerfile and compose.env * Close stale issues automatically * Integrated CI with Github Actions (#3) * feat: integrated ci with github actions * fix: use secrets for docker org and update image * docs: clarify why we use -t if no tty exists * fix: correct remaining references to old repo chore: prettier automatically updated markdown as well * fix: hardcode docker org * change testing image to just testing * ci: add armv7 as a supported platform * finished migration steps * corrected linting in build-push action * corrected linting in build-push action (2) * minor preps for PR * correcting push on pull request and minor details * adjusted workflows to adhere closer to @wernerfred's diagram * minor patches * adjusting Dockerfile's installation of base packages * adjusting schedule for stale issue action * reverting license text * improving CONTRIBUTING.md PR text * Update CONTRIBUTING.md * a bigger patch at the end * moved all scripts into one directory under target/scripts/ * moved the quota-warning.sh script into target/scripts/ and removed empty directory /target/dovecot/scripts * minor fixes here and there * adjusted workflows for use a fully qualified name (i.e. docker.io/...) * improved on the Dockerfile layer count * corrected local tests - now they (actually) work (fine)! * corrected start-mailserver.sh to make use of defaults consistently * removed very old, deprecated variables (actually only one) * various smaller improvements in the end * last commit before merging #6 * rearranging variables to use alphabetic order Co-authored-by: casperklein <casperklein@users.noreply.github.com> Co-authored-by: Nick Pappas <radicand@users.noreply.github.com> Co-authored-by: William Desportes <williamdes@wdes.fr>
2021-01-16 09:16:05 +00:00
run docker exec mail_with_postgrey /bin/bash -c "grep '^POSTGREY_TEXT=\"Delayed by Postgrey\"$' /etc/default/postgrey | wc -l"
assert_success
assert_output 1
}
@test "checking process: postgrey (postgrey server enabled)" {
run docker exec mail_with_postgrey /bin/bash -c "ps aux --forest | grep -v grep | grep 'postgrey'"
assert_success
}
@test "checking postgrey: there should be a log entry about a new greylisted e-mail user@external.tld in /var/log/mail/mail.log" {
#editing the postfix config in order to ensure that postgrey handles the test e-mail. The other spam checks at smtpd_recipient_restrictions would interfere with it.
run docker exec mail_with_postgrey /bin/sh -c "sed -ie 's/permit_sasl_authenticated.*policyd-spf,$//g' /etc/postfix/main.cf"
run docker exec mail_with_postgrey /bin/sh -c "sed -ie 's/reject_unauth_pipelining.*reject_unknown_recipient_domain,$//g' /etc/postfix/main.cf"
run docker exec mail_with_postgrey /bin/sh -c "sed -ie 's/reject_rbl_client.*inet:127\.0\.0\.1:10023$//g' /etc/postfix/main.cf"
run docker exec mail_with_postgrey /bin/sh -c "sed -ie 's/smtpd_recipient_restrictions =/smtpd_recipient_restrictions = check_policy_service inet:127.0.0.1:10023/g' /etc/postfix/main.cf"
run docker exec mail_with_postgrey /bin/sh -c "/etc/init.d/postfix reload"
run docker exec mail_with_postgrey /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/postgrey.txt"
sleep 5 #ensure that the information has been written into the log
run docker exec mail_with_postgrey /bin/bash -c "grep -i 'action=greylist.*user@external\.tld' /var/log/mail/mail.log | wc -l"
assert_success
assert_output 1
}
@test "checking postgrey: there should be a log entry about the retried and passed e-mail user@external.tld in /var/log/mail/mail.log" {
sleep 20 #wait 20 seconds so that postgrey would accept the message
run docker exec mail_with_postgrey /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/postgrey.txt"
sleep 8
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 00:53:30 +00:00
run docker exec mail_with_postgrey /bin/sh -c "grep -i 'action=pass, reason=triplet found.*user@external\.tld' /var/log/mail/mail.log | wc -l"
assert_success
assert_output 1
}
@test "checking postgrey: there should be a log entry about the whitelisted and passed e-mail user@whitelist.tld in /var/log/mail/mail.log" {
run docker exec mail_with_postgrey /bin/sh -c "nc -w 8 0.0.0.0 10023 < /tmp/docker-mailserver-test/nc_templates/postgrey_whitelist.txt"
run docker exec mail_with_postgrey /bin/sh -c "grep -i 'action=pass, reason=client whitelist' /var/log/mail/mail.log | wc -l"
assert_success
assert_output 1
}
@test "checking postgrey: there should be a log entry about the whitelisted local and passed e-mail user@whitelistlocal.tld in /var/log/mail/mail.log" {
run docker exec mail_with_postgrey /bin/sh -c "nc -w 8 0.0.0.0 10023 < /tmp/docker-mailserver-test/nc_templates/postgrey_whitelist_local.txt"
run docker exec mail_with_postgrey /bin/sh -c "grep -i 'action=pass, reason=client whitelist' /var/log/mail/mail.log | wc -l"
assert_success
assert_output 1
}
@test "checking postgrey: there should be a log entry about the whitelisted recipient user2@otherdomain.tld in /var/log/mail/mail.log" {
run docker exec mail_with_postgrey /bin/sh -c "nc -w 8 0.0.0.0 10023 < /tmp/docker-mailserver-test/nc_templates/postgrey_whitelist_recipients.txt"
run docker exec mail_with_postgrey /bin/sh -c "grep -i 'action=pass, reason=recipient whitelist' /var/log/mail/mail.log | wc -l"
assert_success
assert_output 1
}