Merge pull request 'clean-up docs to avoid version-mismatches in BE and FE in new installs (for stable)' (#378) from stefan230/akkoma:stable into stable

Reviewed-on: https://akkoma.dev/AkkomaGang/akkoma/pulls/378

docs/docs/administration/CLI_tasks/frontend.md

@@ -21,24 +21,23 @@ Currently, known `<frontend>` values are:
 - [admin-fe](https://akkoma.dev/AkkomaGang/admin-fe)
 - [mastodon-fe](https://akkoma.dev/AkkomaGang/masto-fe)
 - [pleroma-fe](https://akkoma.dev/AkkomaGang/pleroma-fe)
-- [soapbox-fe](https://gitlab.com/soapbox-pub/soapbox-fe)
 
 You can still install frontends that are not configured, see below.
 
-## Example installations for a known frontend
+## Example installations for a known frontend (Stable-Version)
 
 For a frontend configured under the `available` key, it's enough to install it by name.
 
 === "OTP"
 
     ```sh
-    ./bin/pleroma_ctl frontend install pleroma-fe
+    ./bin/pleroma_ctl frontend install pleroma-fe --ref stable
     ```
 
 === "From Source"
 
     ```sh
-    mix pleroma.frontend install pleroma-fe
+    mix pleroma.frontend install pleroma-fe --ref stable
     ```
 
 This will download the latest build for the pre-configured `ref` and install it. It can then be configured as the one of the served frontends in the config file (see `primary` or `admin`).

docs/docs/administration/updating.md

@@ -1,17 +1,36 @@
 # Updating your instance
 
-You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/CHANGELOG.md)** in case there are config deprecations, special update steps, etc.
+You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/stable/CHANGELOG.md)** in case there are config deprecations, special update steps, etc.
 
 Besides that, doing the following is generally enough:
+## Switch to the akkoma user
+```sh
+# Using sudo
+sudo -su akkoma
+
+# Using doas
+doas -su akkoma
+
+# Using su
+su -s "$SHELL" akkoma
+```
 
 ## For OTP installations
-
 ```sh
-# Download the new release
+# Download latest stable release
-su akkoma -s $SHELL -lc "./bin/pleroma_ctl update" 
+./bin/pleroma_ctl update --branch stable
 
-# Migrate the database, you are advised to stop the instance before doing that
+# Stop akkoma
-su akkoma -s $SHELL -lc "./bin/pleroma_ctl migrate"
+./bin/pleroma stop # or using the system service manager (e.g. systemctl stop akkoma)
+
+# Run database migrations
+./bin/pleroma_ctl migrate
+
+# Update Pleroma-FE frontend to latest stable. For other Frontends see Frontend Configration doc for more information.
+./bin/pleroma_ctl frontend install pleroma-fe --ref stable
+
+# Start akkoma
+./bin/pleroma daemon # or using the system service manager (e.g. systemctl start akkoma)
 ```
 
 If you selected an alternate flavour on installation, 
@@ -19,13 +38,28 @@ you _may_ need to specify `--flavour`, in the same way as
 [when installing](../../installation/otp_en#detecting-flavour).
 
 ## For from source installations (using git)
+Run as the `akkoma` user:
 
-1. Go to the working directory of Akkoma (default is `/opt/akkoma`)
+```sh
-2. Run `git pull` [^1]. This pulls the latest changes from upstream.
+# Pull in new changes
-3. Run `mix deps.get` [^1]. This pulls in any new dependencies.
+git pull
-4. Stop the Akkoma service.
-5. Run `mix ecto.migrate` [^1] [^2]. This task performs database migrations, if there were any.
-6. Start the Akkoma service.
 
-[^1]: Depending on which install guide you followed (for example on Debian/Ubuntu), you want to run `git` and `mix` tasks as `akkoma` user by adding `sudo -Hu akkoma` before the command.
+# Run with production configuration
-[^2]: Prefix with `MIX_ENV=prod` to run it using the production config file.
+export MIX_ENV=prod
+
+# Download and compile dependencies
+mix deps.get
+mix compile
+
+# Stop akkoma (replace with your system service manager's equivalent if different)
+sudo systemctl stop akkoma
+
+# Run database migrations
+mix ecto.migrate
+
+# Update Pleroma-FE frontend to latest stable. For other Frontends see Frontend Configration doc for more information.
+mix pleroma.frontend install pleroma-fe --ref stable
+
+# Start akkoma (replace with your system service manager's equivalent if different)
+sudo systemctl start akkoma
+```

docs/docs/installation/alpine_linux_en.md

@@ -84,12 +84,12 @@ doas adduser -S -s /bin/false -h /opt/akkoma -H -G akkoma akkoma
 
 **Note**: To execute a single command as the Akkoma system user, use `doas -u akkoma command`. You can also switch to a shell by using `doas -su akkoma`. If you don’t have and want `doas` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
 
-* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
+* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
 
 ```shell
 doas mkdir -p /opt/akkoma
 doas chown -R akkoma:akkoma /opt/akkoma
-doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
+doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
 ```
 
 * Change to the new directory:
@@ -109,7 +109,7 @@ doas -u akkoma mix deps.get
   * This may take some time, because parts of akkoma get compiled first.
   * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
 
-* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
+* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
 
 ```shell
 doas -u akkoma mv config/{generated_config.exs,prod.secret.exs}

docs/docs/installation/arch_linux_en.md

@@ -75,12 +75,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma
 
 **Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
 
-* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
+* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
 
 ```shell
 sudo mkdir -p /opt/akkoma
 sudo chown -R akkoma:akkoma /opt/akkoma
-sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
+sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
 ```
 
 * Change to the new directory:
@@ -100,7 +100,7 @@ sudo -Hu akkoma mix deps.get
   * This may take some time, because parts of akkoma get compiled first.
   * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
 
-* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
+* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
 
 ```shell
 sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}

docs/docs/installation/debian_based_en.md

@@ -49,12 +49,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma
 
 **Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
 
-* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
+* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
 
 ```shell
 sudo mkdir -p /opt/akkoma
 sudo chown -R akkoma:akkoma /opt/akkoma
-sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
+sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
 ```
 
 * Change to the new directory:
@@ -74,7 +74,7 @@ sudo -Hu akkoma mix deps.get
   * This may take some time, because parts of akkoma get compiled first.
   * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
 
-* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
+* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
 
 ```shell
 sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}

docs/docs/installation/fedora_based_en.md

@@ -74,12 +74,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma
 
 **Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
 
-* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
+* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
 
 ```shell
 sudo mkdir -p /opt/akkoma
 sudo chown -R akkoma:akkoma /opt/akkoma
-sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
+sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
 ```
 
 * Change to the new directory:
@@ -99,7 +99,7 @@ sudo -Hu akkoma mix deps.get
   * This may take some time, because parts of akkoma get compiled first.
   * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
 
-* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
+* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
 
 ```shell
 sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}

docs/docs/installation/otp_redhat_en.md

@@ -37,7 +37,7 @@ sudo dnf install git gcc g++ erlang elixir erlang-os_mon erlang-eldap erlang-xme
 
 ```shell
 cd ~
-git clone https://akkoma.dev/AkkomaGang/akkoma.git
+git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable
 ```
 
 * Change to the new directory:

docs/docs/installation/verifying_otp_releases.md

@@ -12,7 +12,7 @@ Release URLs will always be of the form
 https://akkoma-updates.s3-website.fr-par.scw.cloud/{branch}/akkoma-{flavour}.zip
 ```
 
-Where branch is usually `stable` or `develop`, and `flavour` is
+Where branch is usually `stable` and `flavour` is
 the one [that you detect on install](../otp_en/#detecting-flavour).
 
 So, for an AMD64 stable install, your update URL will be