Commit graph

2958 commits

Author SHA1 Message Date
bunnei 3794c91145 olsc: Move member initialization to after member functions. 2020-11-20 10:50:50 -08:00
bunnei 6e37676482 hle: service: Stub OLSC Initialize and SetSaveDataBackupSettingEnabled functions.
- Used by Animal Cross: New Horizons v1.6.0 update, minimal stub gets this update working.
2020-11-19 12:36:09 -08:00
Morph ad50209383 hid: Reimplement Begin/EndPermitVibrationSession
Upon further investigation, these commands allow temporary vibrations even when the "Controller Vibration" system setting is disabled. As a result, vibrations are allowed when either the system setting or this flag is set to true. Therefore, we can only block vibrations when both flags are set to false.
2020-11-15 23:33:21 -05:00
Morph d8ad2f3484 controllers/npad: Load input devices on init 2020-11-15 23:33:21 -05:00
Morph 97b2220a82 general: Fix compiler warnings on linux and miscellaneous changes 2020-11-15 23:33:21 -05:00
Morph 30e0d1c973 controllers/npad: Remove the old vibration filter
Previously we used a vibration filter that filters out amplitudes close to each other. It turns out there are cases where this results into vibrations that are too inaccurate. Remove this and move the 100Hz vibration filter (Only allowing a maximum of 100 vibrations per second) from sdl_impl to npad when enable_accurate_vibrations is set to false.
2020-11-15 23:33:21 -05:00
Morph 978ca65f59 hid: Implement InitializeVibrationDevice and IsVibrationDeviceMounted 2020-11-15 23:33:20 -05:00
Morph e9e1876e82 input_common: Add VibrationDevice and VibrationDeviceFactory
A vibration device is an input device that returns an unsigned byte as status.
It represents whether the vibration device supports vibration or not.
If the status returns 1, it supports vibration. Otherwise, it does not support vibration.
2020-11-15 23:33:20 -05:00
Morph 38110dd485 configure_input: Add per-player vibration
Allows for enabling and modifying vibration and vibration strength per player.
Also adds a toggle for enabling/disabling accurate vibrations.

Co-authored-by: Its-Rei <kupfel@gmail.com>
2020-11-15 23:33:20 -05:00
Morph d6a41cfc21 settings: Remove global vibration strength modifier
This will be replaced in favor of per-player vibration strength modifiers.
2020-11-15 23:33:20 -05:00
Morph 92fa5257c7 hid: Mark Begin/EndPermitVibrationSession as stubs
The implementation of these commands seem incomplete and causes rumble in Super Mario Party to stop working since only EndPermitVibrationSession is called. Thus, these are better off being marked as a stub until this can be investigated more thoroughly.
2020-11-15 23:33:20 -05:00
Morph 373408ae8c controllers/npad: Send an empty vibration on destruction/deactivation
This stops all controllers from continuously vibrating when emulation is stopped.
2020-11-15 23:33:20 -05:00
Morph 70f16f1722 hid: Stub IsVibrationDeviceMounted
- Used in Super Mario Odyssey
2020-11-15 23:33:20 -05:00
Morph 9b501af8e3 controllers/npad: Add heuristics to reduce rumble state changes
Sending too many state changes in a short period of time can cause massive performance issues.
As a result, we have to use several heuristics to reduce the number of state changes to minimize/eliminate this performance impact while maintaining the quality of these vibrations as much as possible.
2020-11-15 23:33:20 -05:00
Morph 652d6766d5 configure_input: Hook up the vibration percentage spinbox
This allows setting the vibration strength percentage anywhere from 1% to 100%.
Also hooks up the remaining motion button and checkbox in the Controller Applet.
2020-11-15 23:33:20 -05:00
Morph e02ef3c3be controllers/npad: Stop games from vibrating incorrect controllers
Fixes vibration in 1-2 Switch and potentially other games where they would vibrate both players' joycons at the same time.
2020-11-15 23:33:20 -05:00
Morph 07b81f57ba hid: Fix controller rumble based on new research
This fixes the issue where rumble is only sent to the first controller.
Now, individual controllers can receive their own rumble commands.
2020-11-15 23:33:20 -05:00
Morph 31de52513e hid: Pop a struct of parameters instead of popping individual parameters
Some parameters need to be doubleword aligned due to the presence of the applet_resource_user_id.
Previously, this value was invalid in many commands where it was not doubleword aligned when popped.
2020-11-15 23:33:20 -05:00
Morph e3c2749986 hid: Reorder all HID commands
Reorders all HID commands in command id order.
2020-11-15 23:33:20 -05:00
Morph b92bf51ae1 hid: Implement GetVibrationDeviceInfo
The first u32 describes the vibration device type which is a Linear Resonant Actuator used in Nintendo Switch controller hardware.

The second u32 describes the vibration device position, in this case distinguishing between left and right vibration actuators.

Pro Controllers have 2 LRAs each that can vibrate independently of each other, which means they have 2 distinct vibration device handles to distinguish between the two actuators.

Similarly for joycons, the left joycon can be distinguished from the right joycon through the vibration device handle since each joycon has 1 LRA.
2020-11-15 23:33:20 -05:00
Morph 16e2e1c45f hid: Stub InitializeVibrationDevice 2020-11-15 23:33:20 -05:00
Morph 428ce8ec29 controllers/npad: Rename NPadType to NpadStyleSet
This more accurately represents the underlying type and avoids confusion with NpadType
2020-11-15 23:33:20 -05:00
Morph 0a966e2cac controllers/npad: Add DeviceHandle struct
A DeviceHandle describes a vibration device or six-axis sensor based on the npad type, npad id, and device index/position
2020-11-15 23:33:20 -05:00
Morph 8f2959f680 settings: Preparation for per-game input settings 2020-11-15 23:33:20 -05:00
Morph c0c4ed0d3b controllers/npad: Connect a controller on init if none are connected 2020-11-15 23:33:19 -05:00
bunnei 87f220efff
Merge pull request #4895 from Morph1984/cave-story-plus-applet-fix
applets/controller: Introduce additional checks for mode and caller
2020-11-12 21:55:06 -08:00
bunnei c22d0d9945
Merge pull request #4901 from bunnei/caps-stub
hle: service: caps_u: Stub GetAlbumFileList3AaeAruid.
2020-11-09 21:20:08 -08:00
Lioncash da7be67daf ipc_helpers: Remove usage of the global system instance
Resolves numerous deprecation warnings throughout the codebase due to
inclusion of this header. Now building core should be significantly less
noisy (and also relying on less global state).

This also uncovered quite a few modules that were relying on indirect
includes, which have also been fixed.
2020-11-08 15:58:11 -05:00
Morph a6ecdf42bc applets: Rename LibraryAppletVersion to ControllerAppletVersion 2020-11-08 10:04:12 -05:00
Morph 9efbf5309f applets/controller: Pop normal data for StrapGuide and FirmwareUpdate 2020-11-08 09:35:25 -05:00
Morph af1183a993 applets/controller: Introduce additional checks for mode and caller
Some games like Cave Story+ set invalid values in the ControllerPrivateArg's mode and caller fields.
Use other fields to determine the appropriate mode and caller should either or both fields be invalid.
2020-11-08 09:35:25 -05:00
Morph 88192af8ac applets/controller: Add ControllerUpdateFirmwareArg struct 2020-11-08 09:35:25 -05:00
bunnei dc5396a466 video_core: dma_pusher: Remove integrity check on command lists.
- This seems to cause softlocks in Breath of the Wild.
2020-11-07 00:08:19 -08:00
bunnei a0d7a2732d hle: service: caps_u: Stub GetAlbumFileList3AaeAruid.
- This works similiar to GetAlbumContentsFileListForApplication.
- Since we do not implement the album, this should be safe to stub for now.
- Used by Super Smash Bros. Ultimate (newer updates) in World of Light.
2020-11-06 22:23:15 -08:00
bunnei 087f52e872
Merge pull request #4858 from lioncash/initializer
General: Resolve a few missing initializer warnings
2020-11-04 12:10:10 -08:00
Chloe 6bbbbe8f85
Merge pull request #4869 from bunnei/improve-gpu-sync
Improvements to GPU synchronization & various refactoring
2020-11-04 18:36:55 +11:00
bunnei 448e4d5c2a
Merge pull request #4878 from bunnei/unload-nrr
hle: service: ldr: Implement UnloadNrr.
2020-11-03 08:52:40 -08:00
bunnei 848bdf8a40 fixup! hle service: nvdrv: nvhost_gpu: Update to use SyncpointManager and other improvements. 2020-11-01 01:52:38 -07:00
bunnei e67b8678f8 hle service: nvdrv: nvhost_gpu: Update to use SyncpointManager and other improvements.
- Refactor so that SubmitGPFIFO and KickoffPB use shared functionality.
- Implement add_wait and add_increment flags.
2020-11-01 01:52:38 -07:00
bunnei 1d4cbb92f2 service: hle: nvflinger: Fix potential shutdown crash when GPU is destroyed. 2020-11-01 01:52:38 -07:00
bunnei 66edfd61c6 hle service: nvdrv: nvhost_ctrl: Update to use SyncpointManager. 2020-11-01 01:52:37 -07:00
bunnei 4a3fd97e48 hle service: nvdrv: Update to instantiate SyncpointManager. 2020-11-01 01:52:34 -07:00
bunnei d567b7e841 hle: service: nvdrv: Implement SyncpointManager, to manage syncpoints. 2020-11-01 01:51:54 -07:00
Levi Behunin bca9591660
Rename to align with switchbrew and remove gpu function (#4714)
* Rename to align with switchbrew

* Rename to align with switchbrew and remove gpu function that checks if clearing should be done.
2020-11-01 01:24:17 -07:00
bunnei a0e5cccb92 hle: service: ldr: Implement UnloadNrr.
- Used by Final Fantasy X/X-2 HD Remaster.
2020-10-31 01:22:53 -07:00
Jan Beich 50e52ade85 video_core: unbreak -Werror in NVDEC with Clang
src/core/hle/service/nvdrv/devices/nvhost_nvdec_common.cpp:41:15: error: unused variable 'OutOfMemory' [-Werror,-Wunused-const-variable]
constexpr u32 OutOfMemory{static_cast<u32>(-12)};
              ^
2020-10-30 16:43:10 +00:00
Lioncash 5553bd3ba2 General: Resolve a few missing initializer warnings
Resolves a few -Wmissing-initializer warnings.
2020-10-29 19:37:07 -04:00
Lioncash 020519def8 service: Update function tables
Updates function tables according to info on SwitchBrew.
2020-10-27 21:19:46 -04:00
bunnei d33399e1f4
Merge pull request #4729 from ameerj/nvdec-prod
video_core: NVDEC Implementation
2020-10-26 23:02:42 -07:00
ameerj eb67a45ca8 video_core: NVDEC Implementation
This commit aims to implement the NVDEC (Nvidia Decoder) functionality, with video frame decoding being handled by the FFmpeg library.

The process begins with Ioctl commands being sent to the NVDEC and VIC (Video Image Composer) emulated devices. These allocate the necessary GPU buffers for the frame data, along with providing information on the incoming video data. A Submit command then signals the GPU to process and decode the frame data.

To decode the frame, the respective codec's header must be manually composed from the information provided by NVDEC, then sent with the raw frame data to the ffmpeg library.

Currently, H264 and VP9 are supported, with VP9 having some minor artifacting issues related mainly to the reference frame composition in its uncompressed header.

Async GPU is not properly implemented at the moment.

Co-Authored-By: David <25727384+ogniK5377@users.noreply.github.com>
2020-10-26 23:07:36 -04:00