seaweedfs/weed/command/scaffold/security.toml

101 lines
3.1 KiB
TOML
Raw Normal View History

# Put this file to one of the location, with descending priority
# ./security.toml
# $HOME/.seaweedfs/security.toml
# /etc/seaweedfs/security.toml
# this file is read by master, volume server, and filer
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
# this jwt signing key is read by master and volume server, and it is used for write operations:
# - the Master server generates the JWT, which can be used to write a certain file on a volume server
# - the Volume server validates the JWT on writing
# the jwt defaults to expire after 10 seconds.
[jwt.signing]
key = ""
expires_after_seconds = 10 # seconds
# by default, if the signing key above is set, the Volume UI over HTTP is disabled.
# by setting ui.access to true, you can re-enable the Volume UI. Despite
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
# some information leakage (as the UI is not authenticated), this should not
# pose a security risk.
[access]
ui = false
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
# this jwt signing key is read by master and volume server, and it is used for read operations:
# - the Master server generates the JWT, which can be used to read a certain file on a volume server
# - the Volume server validates the JWT on reading
# NOTE: jwt for read is only supported with master+volume setup. Filer does not support this mode.
[jwt.signing.read]
key = ""
expires_after_seconds = 10 # seconds
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
# If this JWT key is configured, Filer only accepts writes over HTTP if they are signed with this JWT:
# - f.e. the S3 API Shim generates the JWT
# - the Filer server validates the JWT on writing
# the jwt defaults to expire after 10 seconds.
[jwt.filer_signing]
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
key = ""
expires_after_seconds = 10 # seconds
# If this JWT key is configured, Filer only accepts reads over HTTP if they are signed with this JWT:
# - f.e. the S3 API Shim generates the JWT
# - the Filer server validates the JWT on writing
# the jwt defaults to expire after 10 seconds.
[jwt.filer_signing.read]
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
key = ""
expires_after_seconds = 10 # seconds
# all grpc tls authentications are mutual
# the values for the following ca, cert, and key are paths to the PERM files.
# the host name is not checked, so the PERM files can be shared.
[grpc]
ca = ""
# Set wildcard domain for enable TLS authentication by common names
allowed_wildcard_domain = "" # .mycompany.com
[grpc.volume]
cert = ""
key = ""
allowed_commonNames = "" # comma-separated SSL certificate common names
[grpc.master]
cert = ""
key = ""
allowed_commonNames = "" # comma-separated SSL certificate common names
[grpc.filer]
cert = ""
key = ""
allowed_commonNames = "" # comma-separated SSL certificate common names
[grpc.s3]
cert = ""
key = ""
allowed_commonNames = "" # comma-separated SSL certificate common names
[grpc.msg_broker]
cert = ""
key = ""
allowed_commonNames = "" # comma-separated SSL certificate common names
# use this for any place needs a grpc client
# i.e., "weed backup|benchmark|filer.copy|filer.replicate|mount|s3|upload"
[grpc.client]
cert = ""
key = ""
# volume server https options
# Note: work in progress!
# this does not work with other clients, e.g., "weed filer|mount" etc, yet.
[https.client]
enabled = true
[https.volume]
cert = ""
key = ""
ca = ""
[https.master]
cert = ""
key = ""
ca = ""