seaweedfs/weed/security/jwt.go

98 lines
2.6 KiB
Go
Raw Normal View History

2015-02-07 23:35:28 +00:00
package security
import (
"fmt"
2015-02-07 23:35:28 +00:00
"net/http"
"strings"
"time"
2023-08-22 15:26:31 +00:00
jwt "github.com/golang-jwt/jwt/v5"
"github.com/seaweedfs/seaweedfs/weed/glog"
2015-02-07 23:35:28 +00:00
)
type EncodedJwt string
type SigningKey []byte
// SeaweedFileIdClaims is created by Master server(s) and consumed by Volume server(s),
// restricting the access this JWT allows to only a single file.
type SeaweedFileIdClaims struct {
Fid string `json:"fid"`
jwt.RegisteredClaims
}
2015-02-07 23:35:28 +00:00
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
// SeaweedFilerClaims is created e.g. by S3 proxy server and consumed by Filer server.
// Right now, it only contains the standard claims; but this might be extended later
// for more fine-grained permissions.
type SeaweedFilerClaims struct {
jwt.RegisteredClaims
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
}
func GenJwtForVolumeServer(signingKey SigningKey, expiresAfterSec int, fileId string) EncodedJwt {
if len(signingKey) == 0 {
2015-02-07 23:35:28 +00:00
return ""
}
claims := SeaweedFileIdClaims{
fileId,
jwt.RegisteredClaims{},
2019-05-04 15:42:25 +00:00
}
if expiresAfterSec > 0 {
claims.ExpiresAt = jwt.NewNumericDate(time.Now().Add(time.Second * time.Duration(expiresAfterSec)))
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
}
t := jwt.NewWithClaims(jwt.SigningMethodHS256, claims)
encoded, e := t.SignedString([]byte(signingKey))
if e != nil {
glog.V(0).Infof("Failed to sign claims %+v: %v", t.Claims, e)
return ""
}
return EncodedJwt(encoded)
}
// GenJwtForFilerServer creates a JSON-web-token for using the authenticated Filer API. Used f.e. inside
// the S3 API
func GenJwtForFilerServer(signingKey SigningKey, expiresAfterSec int) EncodedJwt {
if len(signingKey) == 0 {
return ""
}
claims := SeaweedFilerClaims{
jwt.RegisteredClaims{},
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
}
if expiresAfterSec > 0 {
claims.ExpiresAt = jwt.NewNumericDate(time.Now().Add(time.Second * time.Duration(expiresAfterSec)))
}
t := jwt.NewWithClaims(jwt.SigningMethodHS256, claims)
encoded, e := t.SignedString([]byte(signingKey))
2015-02-07 23:35:28 +00:00
if e != nil {
glog.V(0).Infof("Failed to sign claims %+v: %v", t.Claims, e)
2015-02-07 23:35:28 +00:00
return ""
}
return EncodedJwt(encoded)
}
func GetJwt(r *http.Request) EncodedJwt {
// Get token from query params
tokenStr := r.URL.Query().Get("jwt")
// Get token from authorization header
if tokenStr == "" {
bearer := r.Header.Get("Authorization")
if len(bearer) > 7 && strings.ToUpper(bearer[0:6]) == "BEARER" {
tokenStr = bearer[7:]
}
}
return EncodedJwt(tokenStr)
}
func DecodeJwt(signingKey SigningKey, tokenString EncodedJwt, claims jwt.Claims) (token *jwt.Token, err error) {
2015-02-07 23:35:28 +00:00
// check exp, nbf
return jwt.ParseWithClaims(string(tokenString), claims, func(token *jwt.Token) (interface{}, error) {
if _, ok := token.Method.(*jwt.SigningMethodHMAC); !ok {
return nil, fmt.Errorf("unknown token method")
}
2019-02-15 08:09:19 +00:00
return []byte(signingKey), nil
2015-02-07 23:35:28 +00:00
})
}