seaweedfs/weed/mount/page_writer/page_chunk_swapfile.go

199 lines
5.2 KiB
Go
Raw Permalink Normal View History

2022-02-14 06:50:44 +00:00
package page_writer
import (
"github.com/seaweedfs/seaweedfs/weed/glog"
"github.com/seaweedfs/seaweedfs/weed/util"
"github.com/seaweedfs/seaweedfs/weed/util/mem"
2022-02-14 06:50:44 +00:00
"os"
"sync"
2022-02-14 06:50:44 +00:00
)
var (
_ = PageChunk(&SwapFileChunk{})
)
type ActualChunkIndex int
type SwapFile struct {
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
dir string
file *os.File
chunkSize int64
chunkTrackingLock sync.Mutex
activeChunkCount int
freeActualChunkList []ActualChunkIndex
2022-02-14 06:50:44 +00:00
}
type SwapFileChunk struct {
sync.RWMutex
2022-02-14 06:50:44 +00:00
swapfile *SwapFile
usage *ChunkWrittenIntervalList
logicChunkIndex LogicChunkIndex
actualChunkIndex ActualChunkIndex
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
activityScore *ActivityScore
//memChunk *MemChunk
2022-02-14 06:50:44 +00:00
}
func NewSwapFile(dir string, chunkSize int64) *SwapFile {
return &SwapFile{
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
dir: dir,
file: nil,
chunkSize: chunkSize,
2022-02-14 06:50:44 +00:00
}
}
func (sf *SwapFile) FreeResource() {
if sf.file != nil {
sf.file.Close()
os.Remove(sf.file.Name())
}
}
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
func (sf *SwapFile) NewSwapFileChunk(logicChunkIndex LogicChunkIndex) (tc *SwapFileChunk) {
2022-02-14 06:50:44 +00:00
if sf.file == nil {
var err error
sf.file, err = os.CreateTemp(sf.dir, "")
if err != nil {
glog.Errorf("create swap file: %v", err)
return nil
}
}
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
sf.chunkTrackingLock.Lock()
defer sf.chunkTrackingLock.Unlock()
sf.activeChunkCount++
// assign a new physical chunk
var actualChunkIndex ActualChunkIndex
if len(sf.freeActualChunkList) > 0 {
actualChunkIndex = sf.freeActualChunkList[0]
sf.freeActualChunkList = sf.freeActualChunkList[1:]
} else {
actualChunkIndex = ActualChunkIndex(sf.activeChunkCount)
2022-02-14 06:50:44 +00:00
}
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
swapFileChunk := &SwapFileChunk{
2022-02-14 06:50:44 +00:00
swapfile: sf,
usage: newChunkWrittenIntervalList(),
logicChunkIndex: logicChunkIndex,
actualChunkIndex: actualChunkIndex,
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
activityScore: NewActivityScore(),
// memChunk: NewMemChunk(logicChunkIndex, sf.chunkSize),
2022-02-14 06:50:44 +00:00
}
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
// println(logicChunkIndex, "|", "++++", swapFileChunk.actualChunkIndex, swapFileChunk, sf)
return swapFileChunk
2022-02-14 06:50:44 +00:00
}
func (sc *SwapFileChunk) FreeResource() {
sc.Lock()
defer sc.Unlock()
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
sc.swapfile.chunkTrackingLock.Lock()
defer sc.swapfile.chunkTrackingLock.Unlock()
sc.swapfile.freeActualChunkList = append(sc.swapfile.freeActualChunkList, sc.actualChunkIndex)
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
sc.swapfile.activeChunkCount--
// println(sc.logicChunkIndex, "|", "----", sc.actualChunkIndex, sc, sc.swapfile)
2022-02-14 06:50:44 +00:00
}
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
func (sc *SwapFileChunk) WriteDataAt(src []byte, offset int64, tsNs int64) (n int) {
sc.Lock()
defer sc.Unlock()
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
// println(sc.logicChunkIndex, "|", tsNs, "write at", offset, len(src), sc.actualChunkIndex)
2022-02-14 06:50:44 +00:00
innerOffset := offset % sc.swapfile.chunkSize
var err error
n, err = sc.swapfile.file.WriteAt(src, int64(sc.actualChunkIndex)*sc.swapfile.chunkSize+innerOffset)
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
sc.usage.MarkWritten(innerOffset, innerOffset+int64(n), tsNs)
if err != nil {
2022-02-14 06:50:44 +00:00
glog.Errorf("failed to write swap file %s: %v", sc.swapfile.file.Name(), err)
}
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
//sc.memChunk.WriteDataAt(src, offset, tsNs)
sc.activityScore.MarkWrite()
2022-02-14 06:50:44 +00:00
return
}
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
func (sc *SwapFileChunk) ReadDataAt(p []byte, off int64, tsNs int64) (maxStop int64) {
sc.RLock()
defer sc.RUnlock()
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
// println(sc.logicChunkIndex, "|", tsNs, "read at", off, len(p), sc.actualChunkIndex)
//memCopy := make([]byte, len(p))
//copy(memCopy, p)
2022-02-14 06:50:44 +00:00
chunkStartOffset := int64(sc.logicChunkIndex) * sc.swapfile.chunkSize
for t := sc.usage.head.next; t != sc.usage.tail; t = t.next {
logicStart := max(off, chunkStartOffset+t.StartOffset)
logicStop := min(off+int64(len(p)), chunkStartOffset+t.stopOffset)
if logicStart < logicStop {
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
if t.TsNs >= tsNs {
actualStart := logicStart - chunkStartOffset + int64(sc.actualChunkIndex)*sc.swapfile.chunkSize
if _, err := sc.swapfile.file.ReadAt(p[logicStart-off:logicStop-off], actualStart); err != nil {
glog.Errorf("failed to reading swap file %s: %v", sc.swapfile.file.Name(), err)
break
}
maxStop = max(maxStop, logicStop)
} else {
println("read old data2", tsNs-t.TsNs, "ns")
2022-02-14 06:50:44 +00:00
}
}
}
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
//sc.memChunk.ReadDataAt(memCopy, off, tsNs)
//if bytes.Compare(memCopy, p) != 0 {
// println("read wrong data from swap file", off, sc.logicChunkIndex)
//}
sc.activityScore.MarkRead()
2022-02-14 06:50:44 +00:00
return
}
func (sc *SwapFileChunk) IsComplete() bool {
sc.RLock()
defer sc.RUnlock()
2022-02-14 06:50:44 +00:00
return sc.usage.IsComplete(sc.swapfile.chunkSize)
}
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
func (sc *SwapFileChunk) ActivityScore() int64 {
return sc.activityScore.ActivityScore()
2022-02-14 06:50:44 +00:00
}
func (sc *SwapFileChunk) WrittenSize() int64 {
sc.RLock()
defer sc.RUnlock()
return sc.usage.WrittenSize()
}
2022-02-14 06:50:44 +00:00
func (sc *SwapFileChunk) SaveContent(saveFn SaveToStorageFunc) {
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
sc.RLock()
defer sc.RUnlock()
2022-02-14 06:50:44 +00:00
if saveFn == nil {
return
}
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
// println(sc.logicChunkIndex, "|", "save")
2022-02-14 06:50:44 +00:00
for t := sc.usage.head.next; t != sc.usage.tail; t = t.next {
startOffset := t.StartOffset
stopOffset := t.stopOffset
tsNs := t.TsNs
for t != sc.usage.tail && t.next.StartOffset == stopOffset {
stopOffset = t.next.stopOffset
t = t.next
tsNs = max(tsNs, t.TsNs)
}
data := mem.Allocate(int(stopOffset - startOffset))
n, _ := sc.swapfile.file.ReadAt(data, startOffset+int64(sc.actualChunkIndex)*sc.swapfile.chunkSize)
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
if n > 0 {
reader := util.NewBytesReader(data[:n])
saveFn(reader, int64(sc.logicChunkIndex)*sc.swapfile.chunkSize+startOffset, int64(n), tsNs, func() {
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2023-01-03 07:20:45 +00:00
})
}
2022-02-14 06:50:44 +00:00
mem.Free(data)
}
2022-02-14 06:50:44 +00:00
}