seaweedfs/weed/server/filer_server_handlers.go

221 lines
6.1 KiB
Go
Raw Permalink Normal View History

2014-03-30 18:28:04 +00:00
package weed_server
import (
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
"errors"
2014-03-30 18:28:04 +00:00
"net/http"
"os"
"strings"
"sync/atomic"
2019-06-25 16:49:27 +00:00
"time"
"github.com/seaweedfs/seaweedfs/weed/glog"
"github.com/seaweedfs/seaweedfs/weed/security"
"github.com/seaweedfs/seaweedfs/weed/util"
"github.com/seaweedfs/seaweedfs/weed/stats"
2014-03-30 18:28:04 +00:00
)
func (fs *FilerServer) filerHandler(w http.ResponseWriter, r *http.Request) {
start := time.Now()
origin := r.Header.Get("Origin")
if origin != "" {
if fs.option.AllowedOrigins == nil || len(fs.option.AllowedOrigins) == 0 || fs.option.AllowedOrigins[0] == "*" {
origin = "*"
} else {
originFound := false
for _, allowedOrigin := range fs.option.AllowedOrigins {
if origin == allowedOrigin {
originFound = true
}
}
if !originFound {
writeJsonError(w, r, http.StatusForbidden, errors.New("origin not allowed"))
return
}
}
w.Header().Set("Access-Control-Allow-Origin", origin)
w.Header().Set("Access-Control-Expose-Headers", "*")
w.Header().Set("Access-Control-Allow-Headers", "*")
w.Header().Set("Access-Control-Allow-Credentials", "true")
w.Header().Set("Access-Control-Allow-Methods", "PUT, POST, GET, DELETE, OPTIONS")
}
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
if r.Method == "OPTIONS" {
OptionsHandler(w, r, false)
return
}
// proxy to volume servers
var fileId string
if strings.HasPrefix(r.RequestURI, "/?proxyChunkId=") {
fileId = r.RequestURI[len("/?proxyChunkId="):]
}
if fileId != "" {
stats.FilerRequestCounter.WithLabelValues(stats.ChunkProxy).Inc()
2021-01-28 23:23:46 +00:00
fs.proxyToVolumeServer(w, r, fileId)
stats.FilerRequestHistogram.WithLabelValues(stats.ChunkProxy).Observe(time.Since(start).Seconds())
return
}
isReadHttpCall := r.Method == "GET" || r.Method == "HEAD"
if !fs.maybeCheckJwtAuthorization(r, !isReadHttpCall) {
writeJsonError(w, r, http.StatusUnauthorized, errors.New("wrong jwt"))
return
}
stats.FilerRequestCounter.WithLabelValues(r.Method).Inc()
defer func() {
stats.FilerRequestHistogram.WithLabelValues(r.Method).Observe(time.Since(start).Seconds())
}()
2020-09-20 23:00:01 +00:00
w.Header().Set("Server", "SeaweedFS Filer "+util.VERSION)
2014-03-30 18:28:04 +00:00
switch r.Method {
case "GET":
2021-07-19 09:59:12 +00:00
fs.GetOrHeadHandler(w, r)
2014-03-30 18:28:04 +00:00
case "HEAD":
2021-07-19 09:59:12 +00:00
fs.GetOrHeadHandler(w, r)
2014-03-30 18:28:04 +00:00
case "DELETE":
if _, ok := r.URL.Query()["tagging"]; ok {
2020-11-16 00:59:28 +00:00
fs.DeleteTaggingHandler(w, r)
} else {
fs.DeleteHandler(w, r)
}
case "POST", "PUT":
// wait until in flight data is less than the limit
contentLength := getContentLength(r)
fs.inFlightDataLimitCond.L.Lock()
inFlightDataSize := atomic.LoadInt64(&fs.inFlightDataSize)
for fs.option.ConcurrentUploadLimit != 0 && inFlightDataSize > fs.option.ConcurrentUploadLimit {
glog.V(4).Infof("wait because inflight data %d > %d", inFlightDataSize, fs.option.ConcurrentUploadLimit)
fs.inFlightDataLimitCond.Wait()
inFlightDataSize = atomic.LoadInt64(&fs.inFlightDataSize)
}
fs.inFlightDataLimitCond.L.Unlock()
atomic.AddInt64(&fs.inFlightDataSize, contentLength)
defer func() {
atomic.AddInt64(&fs.inFlightDataSize, -contentLength)
fs.inFlightDataLimitCond.Signal()
}()
if r.Method == "PUT" {
if _, ok := r.URL.Query()["tagging"]; ok {
fs.PutTaggingHandler(w, r)
} else {
2021-03-31 04:07:34 +00:00
fs.PostHandler(w, r, contentLength)
}
} else { // method == "POST"
2021-03-31 04:07:34 +00:00
fs.PostHandler(w, r, contentLength)
}
2014-03-30 18:28:04 +00:00
}
}
2017-05-28 03:14:22 +00:00
func (fs *FilerServer) readonlyFilerHandler(w http.ResponseWriter, r *http.Request) {
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
start := time.Now()
os.Stdout.WriteString("Request: " + r.Method + " " + r.URL.String() + "\n")
origin := r.Header.Get("Origin")
if origin != "" {
if fs.option.AllowedOrigins == nil || len(fs.option.AllowedOrigins) == 0 || fs.option.AllowedOrigins[0] == "*" {
origin = "*"
} else {
originFound := false
for _, allowedOrigin := range fs.option.AllowedOrigins {
if origin == allowedOrigin {
originFound = true
}
}
if !originFound {
writeJsonError(w, r, http.StatusForbidden, errors.New("origin not allowed"))
return
}
}
w.Header().Set("Access-Control-Allow-Origin", origin)
w.Header().Set("Access-Control-Allow-Headers", "OPTIONS, GET, HEAD")
w.Header().Set("Access-Control-Allow-Credentials", "true")
}
stats.FilerRequestCounter.WithLabelValues(r.Method).Inc()
defer func() {
stats.FilerRequestHistogram.WithLabelValues(r.Method).Observe(time.Since(start).Seconds())
}()
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
// We handle OPTIONS first because it never should be authenticated
if r.Method == "OPTIONS" {
OptionsHandler(w, r, true)
return
}
if !fs.maybeCheckJwtAuthorization(r, false) {
writeJsonError(w, r, http.StatusUnauthorized, errors.New("wrong jwt"))
return
}
2020-09-20 23:00:01 +00:00
w.Header().Set("Server", "SeaweedFS Filer "+util.VERSION)
2017-05-28 03:14:22 +00:00
switch r.Method {
case "GET":
2021-07-19 09:59:12 +00:00
fs.GetOrHeadHandler(w, r)
2017-05-28 03:14:22 +00:00
case "HEAD":
2021-07-19 09:59:12 +00:00
fs.GetOrHeadHandler(w, r)
2017-05-28 03:14:22 +00:00
}
}
2020-10-31 23:44:03 +00:00
func OptionsHandler(w http.ResponseWriter, r *http.Request, isReadOnly bool) {
if isReadOnly {
w.Header().Set("Access-Control-Allow-Methods", "GET, OPTIONS")
2020-10-31 23:44:03 +00:00
} else {
w.Header().Set("Access-Control-Allow-Methods", "PUT, POST, GET, DELETE, OPTIONS")
w.Header().Set("Access-Control-Expose-Headers", "*")
2020-10-31 23:44:03 +00:00
}
w.Header().Set("Access-Control-Allow-Headers", "*")
w.Header().Set("Access-Control-Allow-Credentials", "true")
2020-10-31 23:45:38 +00:00
}
FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client - one JWT for reading and one for writing, analogous to how the JWT between Master and Volume Server works - I did not implement IP `whiteList` parameter on the filer Additionally, because http_util.DownloadFile now sets the JWT, the `download` command should now work when `jwt.signing.read` is configured. By looking at the code, I think this case did not work before. ## Docs to be adjusted after a release Page `Amazon-S3-API`: ``` # Authentication with Filer You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in [Security-Configuration](Security-Configuration) - controlled by the `grpc.*` configuration in `security.toml`. Starting with version XX, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication. ``` Page `Security Overview`: ``` The following items are not covered, yet: - master server http REST services Starting with version XX, the Filer HTTP REST services can be secured with a JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. ... Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer. Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).** ... # Securing Filer HTTP with JWT To enable JWT-based access control for the Filer, 1. generate `security.toml` file by `weed scaffold -config=security` 2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string 3. copy the same `security.toml` file to the filers and all S3 proxies. If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`. If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`. The S3 API Gateway reads the above JWT keys and sends authenticated HTTP requests to the filer. ``` Page `Security Configuration`: ``` (update scaffold file) ... [filer_jwt.signing] key = "blahblahblahblah" [filer_jwt.signing.read] key = "blahblahblahblah" ``` Resolves: #158
2021-12-29 18:47:53 +00:00
// maybeCheckJwtAuthorization returns true if access should be granted, false if it should be denied
func (fs *FilerServer) maybeCheckJwtAuthorization(r *http.Request, isWrite bool) bool {
var signingKey security.SigningKey
if isWrite {
if len(fs.filerGuard.SigningKey) == 0 {
return true
} else {
signingKey = fs.filerGuard.SigningKey
}
} else {
if len(fs.filerGuard.ReadSigningKey) == 0 {
return true
} else {
signingKey = fs.filerGuard.ReadSigningKey
}
}
tokenStr := security.GetJwt(r)
if tokenStr == "" {
glog.V(1).Infof("missing jwt from %s", r.RemoteAddr)
return false
}
token, err := security.DecodeJwt(signingKey, tokenStr, &security.SeaweedFilerClaims{})
if err != nil {
glog.V(1).Infof("jwt verification error from %s: %v", r.RemoteAddr, err)
return false
}
if !token.Valid {
glog.V(1).Infof("jwt invalid from %s: %v", r.RemoteAddr, tokenStr)
return false
} else {
return true
}
}
func (fs *FilerServer) filerHealthzHandler(w http.ResponseWriter, r *http.Request) {
w.Header().Set("Server", "SeaweedFS Filer "+util.VERSION)
w.WriteHeader(http.StatusOK)
}