# DKIM, DMARC & SPF Cloudflare has written an [article about DKIM, DMARC and SPF][cloudflare-dkim-dmarc-spf] that we highly recommend you to read to get acquainted with the topic. !!! note "Rspamd vs Individual validators" With v12.0.0, Rspamd was integrated into DMS. It can perform validations for DKIM, DMARC and SPF as part of the `spam-score-calculation` for an email. DMS provides individual alternatives for each validation that can be used instead of deferring to Rspamd: - DKIM: `opendkim` is used as a milter (like Rspamd) - DMARC: `opendmarc` is used as a milter (like Rspamd) - SPF: `policyd-spf` is used in Postfix's `smtpd_recipient_restrictions` In a future release Rspamd will become the default for these validations, with a deprecation notice issued prior to the removal of the above alternatives. We encourage everyone to prefer Rspamd via `ENABLE_RSPAMD=1`. !!! warning "DNS Caches & Propagation" While modern DNS providers are quick, it may take minutes or even hours for new DNS records to become available / propagate. ## DKIM !!! quote "What is DKIM" DomainKeys Identified Mail (DKIM) is an email authentication method designed to detect forged sender addresses in email (email spoofing), a technique often used in phishing and email spam. [Source][wikipedia-dkim] When DKIM is enabled: 1. Inbound mail will verify any included DKIM signatures 2. Outbound mail is signed (_when you're sending domain has a configured DKIM key_) DKIM requires a public/private key pair to enable **signing (_via private key_)** your outgoing mail, while the receiving end must query DNS to **verify (_via public key_)** that the signature is trustworthy. ### Generating Keys You should have: - At least one [email account setup][docs-accounts-add] - Attached a [volume for config][docs-volumes-config] to persist the generated files to local storage DKIM is currently supported by either OpenDKIM or Rspamd: === "OpenDKIM" OpenDKIM is currently [enabled by default][docs-env-opendkim]. The command `docker exec setup config dkim help` details supported config options, along with some examples. !!! example "Create a DKIM key" Generate the DKIM files with: ```sh docker exec -ti setup config dkim ``` Your new DKIM key(s) and OpenDKIM config files have been added to `/tmp/docker-mailserver/opendkim/`. ??? note "LDAP accounts need to specify domains explicitly" The command is unable to infer the domains from LDAP user accounts, you must specify them: ```sh setup config dkim domain 'example.com,example.io' ``` ??? tip "Changing the key size" The private key presently defaults to RSA-4096. To create an RSA 2048-bit key run: ```sh setup config dkim keysize 2048 ``` === "Rspamd" Opt-in via [`ENABLE_RSPAMD=1`][docs-env-rspamd] (_and disable the default OpenDKIM: `ENABLE_OPENDKIM=0`_). Rspamd provides DKIM support through two separate modules: 1. [Verifying DKIM signatures from inbound mail][rspamd-docs-dkim-checks] is enabled by default. 2. [Signing outbound mail with your DKIM key][rspamd-docs-dkim-signing] needs additional setup (key + dns + config). !!! example "Create a DKIM key" Presently only OpenDKIM is supported with `setup config dkim`. To generate your DKIM key and DNS files you'll need to specify: - `-s` The DKIM selector (_eg: `mail`, it can be anything you like_) - `-d` The sender address domain (_everything after `@` from the email address_) See `rspamadm dkim_keygen -h` for an overview of the supported options. --- 1. Go inside the container with `docker exec -ti bash` 2. Add `rspamd/dkim/` folder to your config volume and switch to it: `cd /tmp/docker-mailserver/rspamd/dkim` 3. Run: `rspamadm dkim_keygen -s mail -b 2048 -d example.com -k mail.private > mail.txt` (_change `-d` to your domain-part_) 4. Presently you must ensure Rspamd can read the `.private` file, run: -`chgrp _rspamd mail.private` -`chmod g+r mail.private` --- !!! bug inline end "DMS config volume support is not ready for Rspamd" Presently you'll need to [explicitly mount `rspamd/modules/override.d/`][docs-rspamd-config-dropin] as an additional volume; do not use [`rspamd-modules.conf`][docs-rspamd-config-declarative] for this purpose. Create a configuration file for the DKIM signing module at `rspamd/modules/override.d/dkim_signing.conf` and populate it with config as shown in the example below: ??? example "DKIM Signing Module Configuration Examples" A simple configuration could look like this: ```cf # documentation: https://rspamd.com/doc/modules/dkim_signing.html enabled = true; sign_authenticated = true; sign_local = true; use_domain = "header"; use_redis = false; # don't change unless Redis also provides the DKIM keys use_esld = true; check_pubkey = true; # you wan't to use this in the beginning domain { example.com { path = "/tmp/docker-mailserver/rspamd/dkim/mail.private"; selector = "mail"; } } ``` As shown next, you can: - You can add more domains into the `domain { ... }` section. - A domain can also be configured with multiple selectors and keys within a `selectors [ ... ]` array. ```cf # ... domain { example.com { selectors [ { path = "/tmp/docker-mailserver/rspamd/dkim/example.com/rsa.private"; selector = "dkim-rsa"; }, { path = /tmp/docker-mailserver/rspamd/example.com/ed25519.private"; selector = "dkim-ed25519"; } ] } example.org { selectors [ { path = "/tmp/docker-mailserver/rspamd/dkim/example.org/rsa.private"; selector = "dkim-rsa"; }, { path = "/tmp/docker-mailserver/rspamd/dkim/example.org/ed25519.private"; selector = "dkim-ed25519"; } ] } } ``` !!! warning "Support for DKIM keys using Ed25519" This modern elliptic curve is supported by Rspamd, but support by third-parties for [verifying Ed25519 DKIM signatures is unreliable][dkim-ed25519-support]. If you sign your mail with this key type, you should include RSA as a fallback, like shown in the above example. !!! tip "DKIM Signing config: `check_pubkey = true;`" This setting will have Rspamd query the DNS record for each DKIM selector, verifying each public key matches the private key configured. If there is a mismatch, a warning will be omitted to the Rspamd log (`/var/log/supervisor/rspamd.log`). !!! info "Restart required" After restarting DMS, outgoing mail will now be signed with your new DKIM key(s) :tada: You'll need to repeat this process if you add any new domains. !!! warning "RSA Key Sizes >= 4096 Bit" Keys of 4096 bits could denied by some mail servers. According to [RFC 6376][rfc-6376] keys are [preferably between 512 and 2048 bits][github-issue-dkimlength]. ### DNS Record { #dkim-dns } When mail signed with your DKIM key is sent from your mail server, the receiver needs to check a DNS `TXT` record to verify the DKIM signature is trustworthy. !!! example "Configuring DNS - DKIM record" When you generated your key in the previous step, the DNS data was saved into a file `.txt` (default: `mail.txt`). Use this content to update your [DNS via Web Interface][dns::example-webui] or directly edit your [DNS Zone file][dns::wikipedia-zonefile]: === "Web Interface" Create a new record: | Field | Value | | ----- | ------------------------------------------------------------------------------ | | Type | `TXT` | | Name | `._domainkey` (_default: `mail._domainkey`_) | | TTL | Use the default (_otherwise [3600 seconds is appropriate][dns::digicert-ttl]_) | | Data | File content within `( ... )` (_formatted as advised below_) | === "DNS Zone file" `.txt` is already formatted as a snippet for adding to your [DNS Zone file][dns::wikipedia-zonefile]. Just copy/paste the file contents into your existing DNS zone. The `TXT` value has been split into separate strings every 255 characters for compatibility. ??? info "`.txt` - Formatting the `TXT` record value correctly" This file was generated for use within a [DNS zone file][dns::wikipedia-zonefile]. DNS `TXT` records values that are longer than 255 characters need to be split into multiple parts. This is why the public key has multiple parts wrapped within double-quotes between `(` and `)`. A DNS web-interface may handle this internally instead, while [others may not, but expect the input as a single line][dns::webui-dkim]_). You'll need to manually format the value as described below. Your DNS record file (eg: `mail.txt`) should look similar to this: ```txt mail._domainkey IN TXT ( "v=DKIM1; k=rsa; " "p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAqQMMqhb1S52Rg7VFS3EC6JQIMxNDdiBmOKZvY5fiVtD3Z+yd9ZV+V8e4IARVoMXWcJWSR6xkloitzfrRtJRwOYvmrcgugOalkmM0V4Gy/2aXeamuiBuUc4esDQEI3egmtAsHcVY1XCoYfs+9VqoHEq3vdr3UQ8zP/l+FP5UfcaJFCK/ZllqcO2P1GjIDVSHLdPpRHbMP/tU1a9mNZ" "5QMZBJ/JuJK/s+2bp8gpxKn8rh1akSQjlynlV9NI+7J3CC7CUf3bGvoXIrb37C/lpJehS39KNtcGdaRufKauSfqx/7SxA0zyZC+r13f7ASbMaQFzm+/RRusTqozY/p/MsWx8QIDAQAB" ) ; ``` Take the content between `( ... )`, and combine all the quote wrapped content and remove the double-quotes including the white-space between them. That is your `TXT` record value, the above example would become this: ```txt v=DKIM1; k=rsa; p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAqQMMqhb1S52Rg7VFS3EC6JQIMxNDdiBmOKZvY5fiVtD3Z+yd9ZV+V8e4IARVoMXWcJWSR6xkloitzfrRtJRwOYvmrcgugOalkmM0V4Gy/2aXeamuiBuUc4esDQEI3egmtAsHcVY1XCoYfs+9VqoHEq3vdr3UQ8zP/l+FP5UfcaJFCK/ZllqcO2P1GjIDVSHLdPpRHbMP/tU1a9mNZ5QMZBJ/JuJK/s+2bp8gpxKn8rh1akSQjlynlV9NI+7J3CC7CUf3bGvoXIrb37C/lpJehS39KNtcGdaRufKauSfqx/7SxA0zyZC+r13f7ASbMaQFzm+/RRusTqozY/p/MsWx8QIDAQAB ``` To test that your new DKIM record is correct, query it with the `dig` command. The `TXT` value response should be a single line split into multiple parts wrapped in double-quotes: ```console $ dig +short TXT dkim-rsa._domainkey.example.com "v=DKIM1; k=rsa; p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAqQMMqhb1S52Rg7VFS3EC6JQIMxNDdiBmOKZvY5fiVtD3Z+yd9ZV+V8e4IARVoMXWcJWSR6xkloitzfrRtJRwOYvmrcgugOalkmM0V4Gy/2aXeamuiBuUc4esDQEI3egmtAsHcVY1XCoYfs+9VqoHEq3vdr3UQ8zP/l+FP5UfcaJFCK/ZllqcO2P1GjIDVSHLdPpRHbMP/tU1a9mNZ5QMZBJ/JuJK/s+2bp8gpxKn8rh1akSQjlynlV9NI+7J3CC7CUf3bGvoXIrb37C/lpJehS39" "KNtcGdaRufKauSfqx/7SxA0zyZC+r13f7ASbMaQFzm+/RRusTqozY/p/MsWx8QIDAQAB" ``` ### Troubleshooting { #dkim-debug } [MxToolbox has a DKIM Verifier][mxtoolbox-dkim-verifier] that you can use to check your DKIM DNS record(s). When using Rspamd, we recommend you turn on `check_pubkey = true;` in `dkim_signing.conf`. Rspamd will then check whether your private key matches your public key, and you can check possible mismatches by looking at `/var/log/supervisor/rspamd.log`. ## DMARC With DMS, DMARC is pre-configured out of the box. You may disable extra and excessive DMARC checks when using Rspamd via `ENABLE_OPENDMARC=0`. The only thing you need to do in order to enable DMARC on a "DNS-level" is to add new `TXT`. In contrast to [DKIM](#dkim), DMARC DNS entries do not require any keys, but merely setting the [configuration values][dmarc-howto-configtags]. You can either handcraft the entry by yourself or use one of available generators (like [this one][dmarc-tool-gca]). Typically something like this should be good to start with: ```txt _dmarc.example.com. IN TXT "v=DMARC1; p=none; sp=none; fo=0; adkim=4; aspf=r; pct=100; rf=afrf; ri=86400; rua=mailto:dmarc.report@example.com; ruf=mailto:dmarc.report@example.com" ``` Or a bit more strict policies (_mind `p=quarantine` and `sp=quarantine`_): ```txt _dmarc.example.com. IN TXT "v=DMARC1; p=quarantine; sp=quarantine; fo=0; adkim=r; aspf=r; pct=100; rf=afrf; ri=86400; rua=mailto:dmarc.report@example.com; ruf=mailto:dmarc.report@example.com" ``` The DMARC status may not be displayed instantly due to delays in DNS (caches). Dmarcian has [a few tools][dmarcian-tools] you can use to verify your DNS records. ## SPF !!! quote "What is SPF" Sender Policy Framework (SPF) is a simple email-validation system designed to detect email spoofing by providing a mechanism to allow receiving mail exchangers to check that incoming mail from a domain comes from a host authorized by that domain's administrators. [Source][wikipedia-spf] !!! note "Disabling `policyd-spf`?" As of now, `policyd-spf` cannot be disabled. This is WIP. ### Adding an SPF Record To add a SPF record in your DNS, insert the following line in your DNS zone: ```txt example.com. IN TXT "v=spf1 mx ~all" ``` This enables the _Softfail_ mode for SPF. You could first add this SPF record with a very low TTL. _SoftFail_ is a good setting for getting started and testing, as it lets all email through, with spams tagged as such in the mailbox. After verification, you _might_ want to change your SPF record to `v=spf1 mx -all` so as to enforce the _HardFail_ policy. See for more details about SPF policies. In any case, increment the SPF record's TTL to its final value. ### Backup MX & Secondary MX for `policyd-spf` For whitelisting an IP Address from the SPF test, you can create a config file (see [`policyd-spf.conf`](https://www.linuxcertif.com/man/5/policyd-spf.conf)) and mount that file into `/etc/postfix-policyd-spf-python/policyd-spf.conf`. **Example:** Create and edit a `policyd-spf.conf` file at `docker-data/dms/config/postfix-policyd-spf.conf`: ```conf debugLevel = 1 #0(only errors)-4(complete data received) skip_addresses = 127.0.0.0/8,::ffff:127.0.0.0/104,::1 # Preferably use IP-Addresses for whitelist lookups: Whitelist = 192.168.0.0/31,192.168.1.0/30 # Domain_Whitelist = mx1.not-example.com,mx2.not-example.com ``` Then add this line to `docker-compose.yml`: ```yaml volumes: - ./docker-data/dms/config/postfix-policyd-spf.conf:/etc/postfix-policyd-spf-python/policyd-spf.conf ``` [docs-accounts-add]: ../user-management.md#adding-a-new-account [docs-volumes-config]: ../advanced/optional-config.md [docs-env-opendkim]: ../environment.md#enable_opendkim [docs-env-rspamd]: ../environment.md#enable_rspamd [docs-rspamd-config-dropin]: ../security/rspamd.md#manually [docs-rspamd-config-declarative]: ../security/rspamd.md#with-the-help-of-a-custom-file [cloudflare-dkim-dmarc-spf]: https://www.cloudflare.com/learning/email-security/dmarc-dkim-spf/ [rfc-6376]: https://tools.ietf.org/html/rfc6376 [github-issue-dkimlength]: https://github.com/docker-mailserver/docker-mailserver/issues/1854 [rspamd-docs-dkim-checks]: https://www.rspamd.com/doc/modules/dkim.html [rspamd-docs-dkim-signing]: https://www.rspamd.com/doc/modules/dkim_signing.html [dns::example-webui]: https://www.vultr.com/docs/introduction-to-vultr-dns/ [dns::digicert-ttl]: https://www.digicert.com/faq/dns/what-is-ttl [dns::wikipedia-zonefile]: https://en.wikipedia.org/wiki/Zone_file [dns::webui-dkim]: https://serverfault.com/questions/763815/route-53-doesnt-allow-adding-dkim-keys-because-length-is-too-long [dkim-ed25519-support]: https://serverfault.com/questions/1023674/is-ed25519-well-supported-for-the-dkim-validation/1074545#1074545 [mxtoolbox-dkim-verifier]: https://mxtoolbox.com/dkim.aspx [dmarc-howto-configtags]: https://github.com/internetstandards/toolbox-wiki/blob/master/DMARC-how-to.md#overview-of-dmarc-configuration-tags [dmarc-tool-gca]: https://dmarcguide.globalcyberalliance.org [dmarcian-tools]: https://dmarcian.com/dmarc-tools/ [wikipedia-dkim]: https://en.wikipedia.org/wiki/DomainKeys_Identified_Mail [wikipedia-spf]: https://en.wikipedia.org/wiki/Sender_Policy_Framework