The new setup will now set env variables on one place and on one place
only. The old setup used two separate places wich is not DRY and
confusing.
Some default values changed:
1. PFLOGSUMM_TRIGGER: logrotate => none
2. REPORT_SENDER: mailserver-report@HOSTNAME => mailserver-report@DOMAIN
3. REPORT_RECIPIENT: "0" => POSTMASTER_ADDRESS
One env variable was renamed: REPORT_INTERVAL => LOGROTATE_INTERVAL
I believe these defaults to be more sensible, especially the REPORT_RECIPIENT
address. The PFLOGSUMM_TRIGGER value was changed to `none` because otherwise
people would start getting daily Postfix log summary reports automatically.
Now, this is opt-in, and reports are sent only when enabled properly.
Some of the variables changed were marked as deprecated. I removed the note,
as the variables now bear some (sane) defaults again for other variables
(i.e.) REPORT_RECIPIENT is now default for other recipient addresses.
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Removes duplicate logic from `check-for-changes.sh` that is used/maintained elsewhere to avoid risk of problems, as this code is already starting to diverge / rot.
---
Previously the change detection support has had code added for rebuilding config upon change detection which is the same as code run during startup scripts. Unfortunately over time this has fallen out of sync. Mostly the startup scripts would get maintenance and the contributor and reviewers may not have been aware of the duplicate code handled by `check-for-changes.sh`.
That code was starting to diverge in addition to some changes in structure (_eg: relay host logic seems interleaved here vs separated out in startup scripts_). I wanted to address this before it risks becoming a much bigger headache.
Rather than bloat `helper-functions.sh` further, I've added a `helpers/` folder extracting relevant common logic between startup scripts and `changedetector`. If you want to follow that process I've kept scoped commits to make those diffs easier. Some minor changes/improvements were added but nothing significant.
---
- chore: Extract relay host logic to new `relay.sh` helper
- chore: Extract `/etc/postfix/sasl_passwd` logic to new `sasl.sh` helper
- chore: Extract `postfix-accounts.cf` logic to new `accounts.sh` helper
- chore: Extract `/etc/aliases` logic to new `aliases.sh` helper
- chore: Extract `/etc/postfix/vhost` logic to new `postfix.sh` helper
- chore: Add inline docs for Postfix configs
> These are possibly more verbose than needed and can be reduced at a later stage.
> They are helpful during this refactor process while investigating that everything is handled correctly.
`accounts.sh`:
- Add note regarding potential bug for bare domain setups with `/etc/postfix/vhost` and `mydestination` sharing same domain value.
`relay.sh`:
- Remove the tabs for a single space delimiter, revised associated comment.
- Add PR reference for original `_populate_relayhost_map` implementation which has some useful details.
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Mostly cleans up the code and documents it better, although there are some minor fixes for handling `SSL_DOMAIN` ENV and additional logging added for spotting issues related to it in future when troubleshooting.
Commits are scoped with context messages for easing review if necessary. Overview of changes:
Traefik specific:
- Logic extracted out into it's own function.
- Conditional reworked to assist with debugging.
- `SSL_DOMAIN` must not be empty when attempting to extract.
- Added additional notes.
`SSL_TYPE=letsencrypt` case:
- Revised top note block.
- Correct handling for `SSL_DOMAIN`.
- Removed some unnecessary nesting.
- Less repetitive error message for `LETSENCRYPT_DOMAIN`.
- Added use of panics where appropriate (kept `return 1` so failures still exit functionality early).
- Improved inline docs.
Dovecot quota support would log auth failures when Postfix validated incoming mail to accept/reject and the `check_policy_service` for `quota-status` was queried with a recipient that was an account alias.
When Dovecot is not aware of the user account, it will not be able to check a quota and inform Postfix that everything is fine, Postfix will accept the mail and send it to Dovecot, where if the quota is exceeded will result in a bounce back to the sender. This is considered "backscatter" and can be abused by spammers forging the sender address which can get your server blacklisted.
The solution is to either disable quota support `ENABLE_QUOTAS=0`, or as a workaround, add dummy accounts to Dovecot userdb for aliases in `postfix-virtual.cf` (not `postfix-aliases.cf`), these dummy accounts will map to the real user account mailbox (real users are defined in `postfix-accounts.cf`).
The workaround is naive, in that we only check for basic 1-to-1 alias mapping to real accounts. This will still be an issue for aliases that map to another alias or multiple addresses (real or alias). Unfortunately Postfix will not expand aliases until accepting mail where this would be too late.
A better solution is to proxy the `check_policy_service` from Dovecot `quota-status` that Postfix queries in `main.cf:smtpd_recipient_restrictions`, however this requires a fair amount more of additional work and still requires an implementation to recursively query aliases for nested or multiple address mappings, which can then be forwarded to the `quota-status` service configured by Dovecot in `/etc/dovecot/conf.d/90-quota.conf`.
LDAP users are unaffected as quota support is not supported/implemented with `docker-mailserver` at this time, it is always considered disabled when using LDAP.
---
Additionally Dovecot configuration for `passdb` has been fixed to use the correct password hash scheme of `SHA512-CRYPT`.
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* function _defunc removed
* _shutdown is better than just notify in that cases
* PANIC_TYPE 'fail-init' introduced
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
"Brief" summary/overview of changes. See the PR discussion or individual commits from the PR for more details.
---
Only applies to the `docs/content/**` content (_and `setup` command_). `target/` and `test/` can be normalized at a later date.
* Normalize to `example.com`
- Domains normalized to `example.com`: `mywebserver.com`, `myserver.tld`, `domain.com`, `domain.tld`, `mydomain.net`, `my-domain.tld`, `my-domain.com`, `example.org`, `whoami.com`.
- Alternative domains normalized to `not-example.com`: `otherdomain.com`, `otherdomain.tld`, `domain2.tld`, `mybackupmx.com`, `whoareyou.org`.
- Email addresses normalized to `admin@example.com` (in `ssl.md`): `foo@bar.com`, `yourcurrentemail@gmail.com`, `email@email.com`, `admin@domain.tld`.
- Email addresses normalized to `external-account@gmail.com`: `bill@gates321boom.com`, `external@gmail.com`, `myemail@gmail.com`, `real-email-address@external-domain.com`.
- **`faq.md`:** A FAQ entry title with `sample.domain.com` changed to `subdomain.example.com`.
- **`mail-fetchmail.md`:** Config examples with FQDNs for `imap`/`pop3` used `example.com` domain for a third-party, changed to `gmail.com` as more familiar third-party/external MTA.
* Normalize config volume path
- Normalizing local config path references to `./docker-data/dms/config/`: `./config/`, `config/`, \``config`\`, `/etc/` (_volume mount src path prefix_).
- Normalize DMS volume paths to `docker-data/dms/mail-{data,state,log}`: `./mail`, `./mail-state` `./data/mail`, `./data/state`, `./data/logs`, `./data/maildata`, `./data/mailstate`, `./data/maillogs`, (_dropped/converted data volumes: `maildata`, `mailstate`_).
- Other docker images also adopt the `docker-data/{service name}/` prefix.
* `ssl.md` - Use `dms/custom-certs` where appropriate.
* Apply normalizations to README and example `docker-compose.yml`
---
Common terms, sometimes interchangeably used or now invalid depending on context: `mail`, `mail container`, `mail server`, `mail-server`, `mailserver`,`docker-mailserver`, `Docker Mailserver`.
Rough transformations applied to most matches (_conditionally, depending on context_):
- 'Docker Mailserver' => '`docker-mailserver`'
- 'mail container' => '`docker-mailserver`' (_optionally retaining ' container'_)
- 'mail server' => 'mail-server' / '`docker-mailserver`'
- 'mail-server' => '`docker-mailserver`'
- 'mailserver' => 'mail-server' / '`docker-mailserver`'
Additionally I checked `docker run` (_plus `exec`, `logs`, etc, sub-commands_) and `docker-compose` commands. Often finding usage of `mail` instead of the expected `mailserver`
Additionally changes `mailserver` hostname in k8s to `mail` to align with other non-k8s examples.
---
* drive-by revisions
Mostly minor revisions or improvements to docs that aren't related to normalization effort.
* fix: Spam bounced test copy/paste typo
* tests(docs): Expand inline documentation
Should assist maintainers like myself that are not yet familiar with this functionality, saving some time :)
* Refactor bounced test + Introduce initial container template
DRY'd up the test and extracted a common init pattern for other tests to adopt in future.
The test does not need to run distinct containers at once, so a common name is fine, although the `init_with_defaults()` method could be given an arg to add a suffix: `init_with_defaults "_${BATS_TEST_NUMBER}"` which could be called in `setup()` for tests that can benefit from being run in parallel.
Often it seems the containers only need the bare minimum config such as accounts provided to actually make the container happy to perform a test, so sharing a `:ro` config mount is fine, or in future this could be better addressed.
---
The test would fail if the test cases requiring smtp access ran before postfix was ready (_only a few seconds after setup scripts announce being done_). Added the wait condition for smtp, took a while to track that failure down.
* chore(refactor): DRY up the `_setup_ssl` method
- `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`.
- The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead.
- This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result.
- Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths.
- Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor.
- `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key.
- That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files.
- I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion).
---
* chore: Remove mkcert logic and dovecot cert
- No longer serving a purpose.
- Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`.
- To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image.
- Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition.
---
* Error handling for SSL_TYPE
- Added a panic utility to exit early when SSL_TYPE conditions are misconfigured.
- Some info text had order of key/cert occurrence swapped to be consistent with key then cert.
- Some existing comments moved and rephrased.
- Additional comments added.
- `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks).
- _notify messages lifted out of conditionals so that they always output when the case is hit.
- ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~
---
* Use sedfile + improve sed expressions + update case style
- Uses sedfile when appropriate (file change intentional, not optional match/check).
- sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)).
- sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement.
- case statements adopt the `(` prefix, adopting recent shell style for consistency.
---
* Refactor SSL_TYPE=disabled
- Postfix is also disabled now.
- Included heavy inline documentation reference for maintainers.
- Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'.
---
* I'm a friggin' sed wizard now
- The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`.
- I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines).
- Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better.
---
* tests(fix): Tests that require SSL/TLS to pass
- SSL_TYPE=snakeoil added as temporary workaround.
- nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests.
- Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past.
- The removed SSL test is already handled in mail_ssl_manual.bats
ldap test:
- Replace `--link` alias option with `--network` and alias assignment.
- Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure.
privacy test:
- Also needed `SSL_TYPE` to pass the starttls test.
`tests.bats` had another starttls test for imap:
- Workaround for now is to give the main test container `SSL_TYPE=snakeoil`.
---
* Remove the expired lets-encrypt cert
This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores.
No longer the case today.
---
* chore: Housekeeping
Not required for this PR branch, little bit of tidying up while working on these two test files.
- privacy test copied over content when extracted from `tests.bats` that isn't relevant.
- ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find.
- Additionally converted the two localhost FQDN to vars.
---
* Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case)
- This is to prevent other tests from failing by hitting the panic catchall case.
- More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value.
---
* Add inline documentation for `dms_panic`
- This could later be better formatted and placed into contributor docs.
Panic with kill (shutdown) not exit (errex):
- `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process).
- `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't.
The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
Although these two config lines have not changed since `debian:buster-slim` image, Dovecot seems to now be affected by it which results in rejecting cipher suites below TLS v1.2.
To continue supporting the `intermediate` TLS_LEVEL, we now need to relax the global config. Dovecot could alternatively be given a modified openssl config to only affect it's interaction with openssl.
Postfix is unaffected and continues to support TLS <1.2 cipher suites when configured to.
This feature was originally introduced by the PR: https://github.com/docker-mailserver/docker-mailserver/pull/1463
- Assign default DH params to use via Dockerfile build instead of copy and update at runtime.
- Parameterized service names and paths.
- Refactor postfix and dovecot dh methods to wrap shared dh logic
- I don't see any value in checking the alternative service for dh params file to copy over, so that's now dropped too.
- Another conditional check is dropped and the default fallback message for existing DH params file is no longer relevant.
- Improved the remaining `_notify` messages. Collapsing the warning into a single logged message also seemed relevant.
- There is no apparent need for special handling with `ONE_DIR=1`. Dropped it.
- Refactor DH params tests
- Combine custom and default DH param tests into single test file
- docs: Add instructions to use custom DH params
There is no official documented support for custom DH parameters. As no guarantee is provided, this is considered an internal change, not a breaking one.
Centralize the collection of the HOSTNAME and DOMAINAME so that it's predictable and uniform across the various scripts (using the helper). Ensure it supports the various configurations users can have (both subdomain and without subdomain, override and no override).
---
* using _obtain_hostname_and_domainname helper + covers when not a subdomain
doc: OVERRIDE_HOSTNAME takes priority
* added tests for non-subdomain hostname + further improvements
* moved SRS DOMAINANME tests into hostname test file + Allowing DOMAINNAME ENV to override what would be automatically set
---
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
* fix: make sure the SASLAUTHD_LDAP_HOST/PROTO logic makes sense and use LDAP_SERVER_HOST as a fallback (#1983)
* chore(docs): document changes to LDAP/SASLAUTHD as of #1983
* fix!: apply default value modifications suggested in #1983https://github.com/docker-mailserver/docker-mailserver/issues/1983#issuecomment-844848224
* chore(test): Test SASLAUTHD_LDAP_SERVER with protocol and ..._SSL=0, as well as with default bind credentials
Note that there are currently no regression tests for this as there's only one setup_file, so that would require big changes to the testing methodology.
* refactor!: completely remove SASLAUTHD_LDAP_SSL and SASLAUTHD_LDAP_PROTO
Co-authored-by: Georg Lauterbach <44545919+aendeavor@users.noreply.github.com>
Co-authored-by: Frederic Werner <20406381+wernerfred@users.noreply.github.com>
* mail binary
* initial work
* make env vars available
* typo
* some fixes
* make script ugly, to satisfy linter..
* mailserver.env updated
* Version to welcome message added
* remove VERSION file references
* VERSION --> DMS_VERSION
* fetch remote version
* variable usage
* Quoting added
* edge test & docu
* dash removed
* subject changed
* re-add VERSION
* VERSION added
* new file: VERSION
* rewrite
* unnecessary additions from fail2ban PR removed
* UPDATE_CHECK_INTERVAL added
* syntax check & _log function
* comment added
* final commit
* Use dovecot's LDAP uris option instead of hosts (fixes#1510)
* Clean up variables & environment documentation for #1901
Co-authored-by: Frederic Werner <20406381+wernerfred@users.noreply.github.com>
Co-authored-by: Georg Lauterbach <44545919+aendeavor@users.noreply.github.com>
* splitting start-mailserver.sh
* refactoring part 2
* refactored setup-stack.sh
* stzarted adjusting target/bin/*.sh to use new usage format
* corrected lowercase-uppercase test error
* better handling of .bashrc variable export
* linting tests and fix for default assignements
* last stylistic changes and rebase
