* refactored `daemon-stack.sh`
A new method was introduced to uniformaly start daemons and log output
accordingly. The methods for daemon start were renamed (plural ->
singular), therefore the adjustments in `start-mailserver.sh`.
* cleaned Fetchmail setup from `daemon-stack.sh`
Not sure why, but the Fetchmail setup was somehow happening in
`daemon-stack.sh` - this is not supposed to be the case. I relocated the
setup into `setup-stack.sh`, where it belong.
* delete old, unnecessary script in `target/bin/`
These are unused leftovers from the last commit, that relocated the
setup of Fetchmail into `setup.stack.sh`.
* corrected changedetector function name
* Apply suggestions from code review
* adjusted `debug-fetchmail` script
It is absolutely fine to source `setup-stack.sh` because sourcing the
script does not execute a single function (by desing of the script).
This way, we retain functionality.
* praise be ShellCheck
* added `log.sh` to `debug-fetchmail` as a dependency
* final cleanup
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* added new `_log` function
With `_log`, the `_notify` method wa rendered obsolete. `_notify` was
not completely removed due to test failures in `check-for-changes.sh`.
The new `_log` function properly uses log levels such as `trace`,
`debug`, `info`, `warn` and `error`. It provides a cleaner solution
and renders `DMS_DEBUG` obsolete too (as only `_notify` depends on it).
* converted all helper script to new `_log` function
* converted all startup stacks to new `log` function
* `start-mailserver.sh` now uses new `_log` function
* final test and misc small script adjustments
* updated documentation
The new setup will now set env variables on one place and on one place
only. The old setup used two separate places wich is not DRY and
confusing.
Some default values changed:
1. PFLOGSUMM_TRIGGER: logrotate => none
2. REPORT_SENDER: mailserver-report@HOSTNAME => mailserver-report@DOMAIN
3. REPORT_RECIPIENT: "0" => POSTMASTER_ADDRESS
One env variable was renamed: REPORT_INTERVAL => LOGROTATE_INTERVAL
I believe these defaults to be more sensible, especially the REPORT_RECIPIENT
address. The PFLOGSUMM_TRIGGER value was changed to `none` because otherwise
people would start getting daily Postfix log summary reports automatically.
Now, this is opt-in, and reports are sent only when enabled properly.
Some of the variables changed were marked as deprecated. I removed the note,
as the variables now bear some (sane) defaults again for other variables
(i.e.) REPORT_RECIPIENT is now default for other recipient addresses.
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Removes duplicate logic from `check-for-changes.sh` that is used/maintained elsewhere to avoid risk of problems, as this code is already starting to diverge / rot.
---
Previously the change detection support has had code added for rebuilding config upon change detection which is the same as code run during startup scripts. Unfortunately over time this has fallen out of sync. Mostly the startup scripts would get maintenance and the contributor and reviewers may not have been aware of the duplicate code handled by `check-for-changes.sh`.
That code was starting to diverge in addition to some changes in structure (_eg: relay host logic seems interleaved here vs separated out in startup scripts_). I wanted to address this before it risks becoming a much bigger headache.
Rather than bloat `helper-functions.sh` further, I've added a `helpers/` folder extracting relevant common logic between startup scripts and `changedetector`. If you want to follow that process I've kept scoped commits to make those diffs easier. Some minor changes/improvements were added but nothing significant.
---
- chore: Extract relay host logic to new `relay.sh` helper
- chore: Extract `/etc/postfix/sasl_passwd` logic to new `sasl.sh` helper
- chore: Extract `postfix-accounts.cf` logic to new `accounts.sh` helper
- chore: Extract `/etc/aliases` logic to new `aliases.sh` helper
- chore: Extract `/etc/postfix/vhost` logic to new `postfix.sh` helper
- chore: Add inline docs for Postfix configs
> These are possibly more verbose than needed and can be reduced at a later stage.
> They are helpful during this refactor process while investigating that everything is handled correctly.
`accounts.sh`:
- Add note regarding potential bug for bare domain setups with `/etc/postfix/vhost` and `mydestination` sharing same domain value.
`relay.sh`:
- Remove the tabs for a single space delimiter, revised associated comment.
- Add PR reference for original `_populate_relayhost_map` implementation which has some useful details.
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* function _defunc removed
* _shutdown is better than just notify in that cases
* PANIC_TYPE 'fail-init' introduced
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Centralize the collection of the HOSTNAME and DOMAINAME so that it's predictable and uniform across the various scripts (using the helper). Ensure it supports the various configurations users can have (both subdomain and without subdomain, override and no override).
---
* using _obtain_hostname_and_domainname helper + covers when not a subdomain
doc: OVERRIDE_HOSTNAME takes priority
* added tests for non-subdomain hostname + further improvements
* moved SRS DOMAINANME tests into hostname test file + Allowing DOMAINNAME ENV to override what would be automatically set
---
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
* mail binary
* initial work
* make env vars available
* typo
* some fixes
* make script ugly, to satisfy linter..
* mailserver.env updated
* Version to welcome message added
* remove VERSION file references
* VERSION --> DMS_VERSION
* fetch remote version
* variable usage
* Quoting added
* edge test & docu
* dash removed
* subject changed
* re-add VERSION
* VERSION added
* new file: VERSION
* rewrite
* unnecessary additions from fail2ban PR removed
* UPDATE_CHECK_INTERVAL added
* syntax check & _log function
* comment added
* final commit
* splitting start-mailserver.sh
* refactoring part 2
* refactored setup-stack.sh
* stzarted adjusting target/bin/*.sh to use new usage format
* corrected lowercase-uppercase test error
* better handling of .bashrc variable export
* linting tests and fix for default assignements
* last stylistic changes and rebase
My `~` substitution and any usage of `/` within `start-mailserver.sh` has been replaced with the `|` delimiter instead as advised for matching style guide preference. Note there are other `sed` substitution delimiters still in use such as `+`.
Also added warning for empty `SSL_TYPE` ENV var that may result in an internal state config persist bug when changing `SSL_TYPE` depending on how a container is restarted.
* feat: Change Postfix smtpd_tls key and cert files to chain_files
Since Postfix 3.4, `smtpd_tls_cert_file` and `smtpd_tls_key_file` have been deprecated in favor of `smtpd_tls_chain_files` which supports a list of values where a single or sequence of file paths provide a private key followed by it's certificate chain.
* feat: Dual certificate support
`smtpd_tls_chain_files` allows for multiple key+cert bundles so that you can provide different key types, such as ECDSA and RSA.
To maintain compatibility with the current CERT/KEY ENV vars only a 2nd certificate is supported.
Since Dovecot 2.2.31 a related feature is also available, but it is limited to only providing one alternative certificate via separate cert and key settings.
---
This feature enables support for multiple certificates, eg for serving modern ECDSA certs with RSA as fallback.
* chore: Refactor variable names to meet style guide
Improved some comments too.
* chore: Have function definitions respect style guide
* chore: Minor edits to comments
* chore: Expand on comments for maintenance, alert of insecure config
When `SSL_TYPE` isn't properly setup, we're still offering SSL connections but not warning in logs about the insecurity of such, or why a misconfiguration may have occurred.
This commit more clearly communicates to the user that they should look into the issue before considering deploying to production.
The `TODO` comments communicate to any future maintainer to consider treating these improper configs as disabling TLS instead.
* fix: Use `snakeoil` cert
I mistakenly thought this was placeholder text, which broke some tests. This adds the two files in the correct order (private key followed by cert/chain), to fix that issue.
* fix: Disable alt cert for Dovecot if necessary
Certain scenarios may persist state of previously configured alt cert via ENV vars that are removed from a future run. If the config is not reset to original immutable state, this will correctly disable the config from using alt cert unintentionally.
* fix: Satisfy ShellCheck lint
By switching from string var to array / list expansion, this better stores the extracted result and applies it in a manner that ShellCheck linting approves, removing the need to disable the rule.
* feat: Support dual cert test
Few tweaks to the test script allows re-purposing it for covering dual cert support as well.
* chore: Rearranged cert and key lines
A little reorganization, mostly placing private key ahead of related cert lines.
* chore: Refactor `_set_certificate`
This should make the parameters a little less confusing.
Previously was 3 parameters, but the Postfix parameter (1st) may look like two variables if you don't pay attention to the surrounding quotes; while the Dovecot parameters (2nd + 3rd) would have an opposing order. There was also a variant where the `FULLKEYCHAIN` var was passed in three times.
Now it's two params, with the 2nd param as an optional one. If the 2nd param is provided, then the two params are in the order of private key then certificate, otherwise if only a single parameter it's a single PEM file with the full cert chain and private key bundled.
This avoids implying that Postfix and Dovecot might use different files.
* chore: Document current state of `SSL_TYPE` logic better
Inlined for the benefit of anyone else maintaining this section if I'm unable to address the concerns within my own time.
* docs: ENV vars
`TLS_LEVEL=old` isn't in the codebase anymore, not likely to be relevant to retain.
No point in documenting what is considered invalid / unsupported config value in the first place for `SSL_TYPE`.
`SSL_TYPE=manual` was missing documentation for both related file path ENV vars, they've been added along with their alt fallback variants.
* chore: Update Dovecot LMTP SSL test config
Not sure how relevant this is, the file isn't complete sync with the main dovecot `10-ssl.conf` config, adding the support just in case.
* chore: Rename `FULLKEYCHAIN` to avoid confusion
There doesn't appear to be a standardized name for this type of file bundle, and `keychain` may be misleading (fullkeychain often provides macOS keychain results on search engines).
Opting for a more explicit `KEY_WITH_FULLCHAIN` name instead.
* fix: Invalid var name
`_set_certificate` refactor commit accidentally changed a var name and committed that breaking the dual cert support (thanks tests!).
* test: Refactor `mail_ssl_manual.bats`
Proper test return values instead of `wc -l` based checking.
Tests with dual cert support active, tests that feature (to better detect failure case.
Third test case was unable to verify new self-signed certificate, added new certs signed with self-signed root CA.
Adjusted openssl `CApath` parameter to use `CAfile` instead as `letsencrypt` cert was replaced thus CA cert is missing from the system trust store.
* test: Properly check for files in `mail_ssl_manual.bats`
Fixes lint error.
Also realized I was accidentally asserting a file exists in the test environment, not within the container.
Resolved that and also added an additional test case to ensure the ENV var files are valid when passed in, in the event a change misconfigures them and that the issue is identified earlier.
* chore: Apply PR review feedback
Better format some strings that had mixed quotes when they weren't necessary.
Additionally DRYed up the config path for Postfix and Dovecot within the `_setup_ssl` method.
Co-authored-by: Georg Lauterbach <infrastructure@itbsd.com>
* let dkim generator accept selector as parameter
* test dkim-generator with selector parameter
* fix: correct name of domain argument in usage
* fix: adapt command to new syntax
* tests: use different quotes
* tests: use different quotes
* tests: remove domains that were never added
* style: change test name
* refactor: dkim setup
* style: remove trailing whitespace
* tests: remove test of removed dummy file
Co-authored-by: Frederic Werner <20406381+wernerfred@users.noreply.github.com>
