* first adjustments to use Fail2Ban with nftables
* replace `iptables` -> `nftables` and adjust tests
nftables lists IPs a bit differently , so the order was adjusted for the
tests to be more flexible.
* line correction in mailserver.env
* change from `.conf` -> `.local` and remove redundant config
* revert HEREDOC to `echo`
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* refactored `check-for-changes.sh`
I refactored `check-for-changes.sh` and used the new log. `_notify` can
therefore be deleted as it is used no more.
I opted to source `/etc/dms-settings` as a whole to
future-proof the script. When the DNS adjustments PRs (that do not exist
by now but will exit in the future) are done, we can then remove
`_obtain_hostname_and_domainname` because we're already writing the
variables to `/etc/dms-settings`. I left instructions in the script in
the form of TODO comments.
Because we now log the date for all messages of the changedetector, we
need to `tail` a bit more log than before.
* refactored `daemon-stack.sh`
A new method was introduced to uniformaly start daemons and log output
accordingly. The methods for daemon start were renamed (plural ->
singular), therefore the adjustments in `start-mailserver.sh`.
* cleaned Fetchmail setup from `daemon-stack.sh`
Not sure why, but the Fetchmail setup was somehow happening in
`daemon-stack.sh` - this is not supposed to be the case. I relocated the
setup into `setup-stack.sh`, where it belong.
* delete old, unnecessary script in `target/bin/`
These are unused leftovers from the last commit, that relocated the
setup of Fetchmail into `setup.stack.sh`.
* corrected changedetector function name
* Apply suggestions from code review
* adjusted `debug-fetchmail` script
It is absolutely fine to source `setup-stack.sh` because sourcing the
script does not execute a single function (by desing of the script).
This way, we retain functionality.
* praise be ShellCheck
* added `log.sh` to `debug-fetchmail` as a dependency
* final cleanup
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* `update-check.sh` now uses the new log
* refactored `setup-stack.sh`
The changes are:
1. Replaced `""` wiht `''` where possible (reasoning: Bash is very
implicit and I'd like to use `''` where possible to indicate no
variables are expanded here)
2. `> /file` -> `>/file` according to our style guide
3. Some log adjustments for messages where I deemed it appropriate
4. Then, an error message from a Dovecot setup was also prevented (by
adding a check whether the directory is present before a `: >...`
command would create a file in this directory).
These are all small, miscellaneous changes that I wanted to combine into
one commit and ultimately one PR because I see no point in opening a PR
for every small change here. I hope this is fine.
* added a small `sleep` to the `_shutdown` function
This ensure the last log message is actually logged before Supervisor
logs the message that it received a SIGTERM. This makes reading the log
easier because now the causal relationship is shown (we are terminating
Supervisor, and not someone else and we're just logging it).
I forgot to replace `""` with `''` in `update-check.sh`, so I included
it here because this is the last commit before PR review.
* re-add exit on successful update (only)
* re-added date information to update-check log messages
* added `_log_with_date` function
The new function will log a message with a proper timestamp. This is all
handled in `log.sh`, we therefore not need to source other files too.
This will be used in the future by `check-for-changes.sh` as well :)
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* refactored scripts located under `target/bin/`
The scripts under `target/bin/` now use the new log and I replaced some
`""` with `''` on the way. The functionality stays the same, this mostly
style and log.
* corrected fail2ban (script and tests)
* corrected OpenDKIM log output in tests
* reverted (some) changes to `sedfile`
Moreover, a few messages for BATS were streamlined and a regression in
the linting script reverted.
* apple PR feedback
* improve log output from `fail2ban` script
The new output has a single, clear message with the '[ ERROR ] '
prefix, and then output that explains the error afterwards. This is
coherent with the logging style which should be used while providing
more information than just a single line about IPTables not functioning.
* simplified `setquota` script
* consistently named the `__usage` function
Before, scripts located under `target/bin/` were using `usage` or
`__usage`. Now, they're using `__usage` as they should.
* improved `sedfile`
With `sedfile`, we cannot use the helper functions in a nice way because
it is used early in the Dockerfile at a stage where the helper scripts
are not yet copied. The script has been adjusted to be canonical with
all the other scripts under `target/bin/`.
* fixed tests
* removed `__usage` from places where it does not belong
`__usage` is to be used on wrong user input, not on other failures as
well. This was fixed in `delquota` and `setquota`.
* apply PR review feedback
* added new `_log` function
With `_log`, the `_notify` method wa rendered obsolete. `_notify` was
not completely removed due to test failures in `check-for-changes.sh`.
The new `_log` function properly uses log levels such as `trace`,
`debug`, `info`, `warn` and `error`. It provides a cleaner solution
and renders `DMS_DEBUG` obsolete too (as only `_notify` depends on it).
* converted all helper script to new `_log` function
* converted all startup stacks to new `log` function
* `start-mailserver.sh` now uses new `_log` function
* final test and misc small script adjustments
* updated documentation
The new setup will now set env variables on one place and on one place
only. The old setup used two separate places wich is not DRY and
confusing.
Some default values changed:
1. PFLOGSUMM_TRIGGER: logrotate => none
2. REPORT_SENDER: mailserver-report@HOSTNAME => mailserver-report@DOMAIN
3. REPORT_RECIPIENT: "0" => POSTMASTER_ADDRESS
One env variable was renamed: REPORT_INTERVAL => LOGROTATE_INTERVAL
I believe these defaults to be more sensible, especially the REPORT_RECIPIENT
address. The PFLOGSUMM_TRIGGER value was changed to `none` because otherwise
people would start getting daily Postfix log summary reports automatically.
Now, this is opt-in, and reports are sent only when enabled properly.
Some of the variables changed were marked as deprecated. I removed the note,
as the variables now bear some (sane) defaults again for other variables
(i.e.) REPORT_RECIPIENT is now default for other recipient addresses.
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* get rid of subshell + exec
The new way of executing `sha512sum` should work as well as the old way
but without the clutter and possible problems the usage of subshells +
exec incurs.
Moreover, there was a misconception about array expansion. Using `""`
around an expanding array (`${ARRAY[@]}`) is quite fine (and actually
the preffered way), not because it makes the expansion _one_ string
(this would be `${ARRAY[*]}`), but it makes sure when elements are
expanded, each element has `""` around them so to speak, i.e. there is
no re-splitting of these elements.
* removed old concerns in comments
* increase test and check for changes sleep duration
The `DYNAMIC_FILES` var was quote wrapped, treating all filepaths to create checksums for as a single string that would be ignored instead of processed individually.
Removed the quotes, and changed the for loop to an array which accomplishes the same goal.
* fix: Prevent unnecessary change detection event
`acme.json` change would extract new cert files, which would then be hashed after restarting services and considered a change event, running through the logic again and restarting services once more when that was not required.
The checksum entries for those cert files are now replaced with new entries containing updated checksum hashes, after `acme.json` extraction.
Removes duplicate logic from `check-for-changes.sh` that is used/maintained elsewhere to avoid risk of problems, as this code is already starting to diverge / rot.
---
Previously the change detection support has had code added for rebuilding config upon change detection which is the same as code run during startup scripts. Unfortunately over time this has fallen out of sync. Mostly the startup scripts would get maintenance and the contributor and reviewers may not have been aware of the duplicate code handled by `check-for-changes.sh`.
That code was starting to diverge in addition to some changes in structure (_eg: relay host logic seems interleaved here vs separated out in startup scripts_). I wanted to address this before it risks becoming a much bigger headache.
Rather than bloat `helper-functions.sh` further, I've added a `helpers/` folder extracting relevant common logic between startup scripts and `changedetector`. If you want to follow that process I've kept scoped commits to make those diffs easier. Some minor changes/improvements were added but nothing significant.
---
- chore: Extract relay host logic to new `relay.sh` helper
- chore: Extract `/etc/postfix/sasl_passwd` logic to new `sasl.sh` helper
- chore: Extract `postfix-accounts.cf` logic to new `accounts.sh` helper
- chore: Extract `/etc/aliases` logic to new `aliases.sh` helper
- chore: Extract `/etc/postfix/vhost` logic to new `postfix.sh` helper
- chore: Add inline docs for Postfix configs
> These are possibly more verbose than needed and can be reduced at a later stage.
> They are helpful during this refactor process while investigating that everything is handled correctly.
`accounts.sh`:
- Add note regarding potential bug for bare domain setups with `/etc/postfix/vhost` and `mydestination` sharing same domain value.
`relay.sh`:
- Remove the tabs for a single space delimiter, revised associated comment.
- Add PR reference for original `_populate_relayhost_map` implementation which has some useful details.
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* chore: Normalize container setup
Easier to grok what is different between configurations.
- Container name usage replaced with variable
- Volumes defined earlier and redeclared when relevant (only real difference is `VOLUME_LETSENCRYPT`)
- Contextual comment about the `acme.json` copy.
- Quoting `SSL_TYPE`, `SSL_DOMAIN` and `-h` values for syntax highlighting.
- Moved `-t` and `${NAME}` to separate line.
- Consistent indentation.
* chore: DRY test logic
Extracts out repeated test logic into methods
* chore: Scope configs to individual test cases (1/3)
- Preparation step for shifting out the container configs to their own scoped test cases. Split into multiple commits to ease reviewing by diffs for this change.
- Re-arrange the hostname and domain configs to match the expected order of the new test cases.
- Shuffle the hostname and domainname grouped tests into tests per container config scope.
- Collapse the `acme.json` test cases into single test case.
* chore: Scope configs to individual test cases (2/3)
- Shifts the hostname and domainname container configs into their respective scoped test cases.
- Moving the `acme.json` container config produces a less favorable diff, so is deferred to a follow-up commit.
- Test cases updated to refer to their `${CONTAINER_NAME}` var instead of the hard-coded string name.
* chore: Scope configs to individual test cases (3/3)
Final commit to shift out the container configs.
- Common vars are exported in `setup_file()` for the test cases to use without needing to repeat the declaration in each test case.
- `teardown_file()` shifts container removal at end of scoped test case.
* chore: Adapt to `common_container_setup` template
- `CONTAINER_NAME` becomes `TEST_NAME` (`common.bash` helper via `init_with_defaults`).
- `docker run ...` and related configuration is now outsourced to the `common.bash` helper, only extra args that the default template does not cover are defined in the test case.
- `TARGET_DOMAIN`establishes the domain folder name for `/etc/letsencrypt/live`.
- `_should*` methods no longer manage a `CONTAINER_NAME` arg, instead using the `TEST_NAME` global that should be valid as test is run as a sequence of test cases.
- `PRIVATE_CONFIG` and the `private_config_path ...` are now using the global `TEST_TMP_CONFIG` initialized at the start of each test case, slightly different as not locally defined/scoped like `PRIVATE_CONFIG` would be within the test case, hence the explicit choice of a different name for context.
* chore: Minor tweaks
- Test case comment descriptions.
- DRY: `docker rm -f` lines moved to `teardown()`
- Use `wait_for_service` helper instead of checking the `changedetector` script itself is running.
- There is a startup delay before the `changedetector` begins monitoring, wait until it ready event is logged.
- Added a helper to query logs for a service (useful later).
- `/bin/sh` commands reduced to `sh`.
- Change the config check to match and compare output, not number of lines returned. Provides better failure output by bats to debug against.
* chore: Add more test functions for `acme.json`
This just extracts out existing logic from the test case to functions to make the test case itself more readable/terse.
* chore: Housekeeping
No changes, just moving logic around and grouping into inline functions, with some added comments.
* chore: Switch to `example.test` certs
This also required copying the source files to match the expected letsencrypt file structure expected in the test/container usage.
* chore: Delete `test/config/letsencrypt/`
No longer necessary, using the `example.test/` certs instead.
These letsencrypt certs weren't for the domains they were used for, and of course long expired.
* chore: Housekeeping
Add more maintainer comments, rename some functions.
* tests: Expand `acme.json` extraction coverage
Finally able to add more test coverage! :)
- Two new methods to validate expected success/failure of extraction for a given FQDN.
- Added an RSA test prior to the wildcard to test a renewal simulation (just with different cert type).
- Added extra method to make sure we're detecting multiple successful change events, not just a previous logged success (false positive).
* tests: Refactor the negotiate_tls functionality
Covers all ports (except POP) and correctly tests against expected verification status with new `example.test` certs.
The `FQDN` var will be put to use in a follow-up commit.
* tests: Verify the certs contain the expected FQDNs
* chore: Extract TLS test methods into a separate helper script
Can be useful for other TLS tests to utilize.
* chore: Housekeeping
* chore: Fix test typo
There was a mismatch between the output and expected output between these two files "find key for" and "find key & cert for". Changed to "find key and/or cert for" to make the warning more clear that it's issued for either or both failure conditions.
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Better logical flow, handling and inline documentation.
Despite the verbosity, it's better to make this visible here for maintenance and debugging purposes than trying to dig through issue/PR or commit history for it.
* fix: Panic when HOSTNAME is misconfigured
* chore: Add more comment docs for maintainers
* tests(fix): Use `--domainname` not ENV `DOMAINNAME`
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Previously we only monitored for `$HOSTNAME` in `/etc/letsencrypt/live` and only for hard-coded `.pem` filenames.
This ensures we check the locations of other locations that may not match `$HOSTNAME`, which we also support. Ideally in future at least the directory to look in would be better known in advance..
