Sergey Nazaryev
84dbf4a7b4
Merge pull request #1634 from 3ap/master
...
fix: use self-signed cert for dovecot
2020-10-01 22:32:15 +02:00
Georg Lauterbach
1d18cb81fb
possible fix for tomav#1383
2020-09-28 11:42:50 +02:00
Georg Lauterbach
8e8671bb42
added option to use non-default network-interface, resolves #1227 ( #1621 )
...
* added option to use non-default network-interface (#1227 )
* minor (stylistic) changes
* properly working with Bash arrays for CONTAINER_NETWORKS
* cleanup to trigger rebuild
* added CODE_OF_CONDUCT to trigger rebuild
2020-09-26 15:11:52 +02:00
Georg Lauterbach
a0791ef457
formatting files according to standard ( #1619 )
...
* added EditorConfig linting
* adding `eclint` as Travis script target
* re-adjusted .pem files to have a newline
2020-09-24 14:54:21 +02:00
Casper
9f7414d95f
remove unnecessary use of cat ( #1616 )
2020-09-23 21:53:07 +02:00
Georg Lauterbach
566eaa0e13
complete refactoring for start-mailserver.sh ( #1605 )
...
* completely refactored `start-mailserver.sh`
* added braces; correctly formatted tabs / spaces
* included `start-mailserver` into shellcheck checks
* cleanup
* removed unnecessary shellcheck comments adding braces and "" where necessary
* corrected some mistakes in CONTRIBUTING
* Makefile now uses correct shellcheck
2020-09-23 10:21:37 +02:00
Georg Lauterbach
67e1e586c7
coherent renaming of functions
2020-09-05 16:53:36 +02:00
mwnx
1286a1266b
Fix/refactor relayhost_map update when dynamically adding account
...
check-for-changes.sh did not have a special case to handle lines in
postfix-relaymap.cf consisting of only a domain (indicating that said
domain should never be relayed). This case is handled by
start-mailserver.sh so when such a line existed, things would work well
until a config file update was detected by check-for-changes.sh. After
that, the generated relayhost_map file would be corrupted.
Fixed by factoring a 'populate_relayhost_map' function out of
start-mailserver.sh and into helper_functions.sh and reusing it in
check-for-changes.sh.
Note: There are certainly quite a few more pieces of code that could be
refactored in a similar fashion.
Note2: check-for-changes.sh would previously never update the
relayhost_map file when $ENABLE_LDAP was set to 1. I don't think this
was intended —there is after all no such condition in
start-mailserver.sh— and so this condition no longer applies.
2020-08-28 15:03:51 +02:00
mwnx
2a70f33a4b
Fix checksum race condition in check-for-changes.sh
...
If a change to one of the tracked files happened soon after (<1 second?)
a previously detected change, it could end up going undetected. In
particular, this could cause integration tests to fail (see next
commits).
Fixed by computing the new checksum file _before_ checking for changes.
2020-08-28 14:57:43 +02:00
Erik Wramner
f206ad7ee1
Merge pull request #1553 from MichaelSp/letsencrypt-traefik-acme-json
...
Letsencrypt traefik v2 acme json
2020-07-16 07:49:04 +02:00
guardiande
5c5c8eb814
Revert dummy change
2020-07-15 09:39:59 +02:00
guardiande
7189d4c63f
Dummy change to trigger travis
2020-07-15 09:12:14 +02:00
guardiande
76d3f7643a
Fix sasl_password generation to allow passwords containing hashes
2020-07-15 08:26:25 +02:00
Michael Sprauer
3a3cec6a8f
trigger reload if cert change
...
/etc/letsencrypt/live/$HOSTNAME/key.pem and /etc/letsencrypt/live/$HOSTNAME/fullchain.pem are watched and will trigger a reload if changed
2020-07-07 21:26:53 +02:00
Michael Sprauer
32c732e276
certificates from acme.json
...
Will extract certificates from acme.json as written by traefik for usage in dovecot and postfix.
Also watches acme.json for changes. For this to work the file has to be mounted/present at `/etc/letsencrypt/acme.json`
2020-06-30 22:43:22 +02:00
Erik Wramner
df4e04f033
Merge pull request #1547 from MrFreezeex/master
...
Fix dovecot variable with whitespace
2020-06-28 11:02:58 +02:00
Gio
d888dbcf7f
Fix typo
2020-06-27 23:07:17 -05:00
Arthur Outhenin-Chalandre
c7f9fbd439
Fix dovecot variable with whitespace
...
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
2020-06-27 11:17:25 +02:00
Casper
c359521121
Typo fixed
2020-06-14 04:39:34 +02:00
Nicholas Pepper
1b659a5574
Modified letsencrypt support to add domain name checking in addition to
...
hostname checking. Added necessary tests and renamed original manual
ssl test to a name that supports adding the other SSL tests.
2020-05-15 04:52:26 +00:00
youtous
d0f7257333
support comments in .cf files
2020-05-06 22:59:55 +02:00
youtous
32d16084ec
sieve scripts using alphabetical order
2020-05-04 16:13:47 +02:00
youtous
92414b7eba
sieve after/before use folder instead of individual listing
...
Loading sieve scripts using a directory scheme permits to handle multi scripts wtihout defining individual sieve_before/sieve_after
2020-05-04 00:27:29 +02:00
youtous
30262128f4
raise a warning when SPAMASSASSIN_SPAM_TO_INBOX isn't explicitly defined
2020-05-03 10:33:50 +02:00
youtous
d829905cf7
init spams to junk
2020-05-03 10:33:28 +02:00
youtous
0c838706d0
Option to disable dovecot quota
2020-05-01 23:42:21 +02:00
youtous
3aeacef125
remove start-mailserver nested conditions dovecot quota
2020-04-30 16:11:45 +02:00
youtous
d45e6b1c22
#fix 1478
2020-04-30 12:47:12 +02:00
youtous
47fac2706f
use ffdhe4096 for DHE params
...
use by default ffdhe4096 for DHE params
use by default ffdhe4096 for DHE params
2020-04-26 22:23:51 +02:00
youtous
2527ebfaf2
added dovecot quota feature
...
add postfix service quota check
check-for-changes on quotas
setquota command
fix checkforchanges quota
addquota verify user exists
add setquota in setup.sh
merging addquota into setquota
test quota commands
add ldap tests for dovecot quota
fix smtp only quota postfix rules
test postfix conf
add quota test integration
add quota exceeded test
add wait analyze
fix tests
fix setup typo
add test fixes
fix error output
wip
update startup rules
fix setup
fix setup tests
fix output commands
remove quota on remove user
try to fix sync limit mails
check if file exists
fix path
change used quota user
fix post size
check if quota file exists
update tests
configure virtualmailbox limit for dovecot
last fix
fix quota expr
relax dovecot tests
auto create dovecot-quotas
fix dovecot apply quota test
wip quota warning
trying to fix get dovadm quota
dovecot applies fix
fix quota warning lda path
test count mail on quota
fix quota warning permissiosn
fix test
2020-04-24 14:56:15 +02:00
Erik Wramner
73b8d65dd3
Merge next into master
2020-04-05 09:28:22 +02:00
Erik Wramner
04777fdb89
Merge pull request #1435 from Drakulix/master
...
amavis: fix config permission
2020-04-05 08:43:47 +02:00
Christian Glahn
ff1248eeee
activate shortcircuit plugin, fixes #1442
2020-03-31 17:09:23 +02:00
Jairo Llopis
a00dced8bc
Allow to set comfortably inet_protocols
...
Setting `inet_protocols = ipv4` is almost a requirement when running behind Docker. Provide a way to make it easy.
@Tecnativa TT22925
2020-03-25 21:43:29 +01:00
Victor Brekenfeld
c491496b6e
avavis fix config permission
2020-03-24 15:43:35 +01:00
Erik Wramner
142b98a209
Merge pull request #1427 from Tecnativa/inet-protocols
...
Allow to set comfortably inet_protocols
2020-03-22 08:56:55 +01:00
Germain Masse
ce41f60888
Move filebeat to its own container
2020-03-20 17:56:18 +01:00
Jairo Llopis
ab22450364
Allow to set comfortably inet_protocols
...
Setting `inet_protocols = ipv4` is almost a requirement when running behind Docker. Provide a way to make it easy.
@Tecnativa TT22925
2020-03-19 08:35:25 +00:00
Wandrille RONCE
d148eeddfb
Add an option to place spam in the inbox, and then sort the mail by a sieve rule for example
2020-03-16 18:47:24 +01:00
Wandrille RONCE
90951876cd
Add an option to place spam in the inbox, and then sort the mail by a sieve rule for example
2020-03-15 17:51:12 +01:00
Torben Weibert
ca16307729
Added -f flag to chmod command to suppress error when no sieve-pipe scripts exist
2020-01-21 22:18:00 +01:00
Torben Weibert
70d87f5119
Add executable flag for scripts in /usr/lib/dovecot/sieve-pipe
2020-01-21 18:18:16 +01:00
Erik Wramner
ae2aa6eeb4
Merge pull request #1372 from phish108/shortcircuit-bayes-99-mini
...
activate SA shortcircuit features via env, fixes #1118 (again)
2020-01-15 07:28:00 +01:00
Lukas Elsner
35df764107
fix clamav issue in logwatch
2020-01-13 17:58:34 -05:00
Christian Glahn
b8726b80a4
activate SA shortcircuit features via env, fixes #1118
2020-01-13 14:22:14 +01:00
Erik Wramner
d847be2d5a
Merge pull request #1331 from Tecnativa/srs-sender-classes
...
Allow to configure SRS sender classes easily
2019-12-06 07:22:46 +01:00
Jairo Llopis
7f1bc8f8b3
Avoid infinite failure log in Amavis with SMTP_ONLY=1
...
Fix #801 by simply touching the file if it doesn't exist.
@Tecnativa TT20505
2019-12-03 13:43:43 +00:00
Jairo Llopis
42348ff353
Allow to configure SRS sender classes easily
...
This will allow to forward safely any email from any host, no matter how strict their SPF policy is, by setting `SRS_SENDER_CLASSES=envelope_sender,header_sender`.
@Tecnativa TT20505
2019-12-03 13:33:51 +00:00
Erik Wramner
c882d95deb
Merge pull request #1284 from vortex852456/master
...
Added optional file user-patches.sh for own patches without recompiling
2019-11-09 15:13:06 +01:00
Germain Masse
36afac7726
New option DOVECOT_MAILBOX_FORMAT
2019-11-04 15:49:29 +00:00
