* chore: Extract out Dovecot Quota test cases into new test file
Test cases are just cut + paste, no logic changed there yet.
* chore: Rename test case descriptions
* chore: Use `setup ...` methods instead of direct calls
* chore: Adjust `_run_in_container_bash` to `_run_in_container`
Plus some additional bug fixes in the disabled test case
* tests(refactor): Revise ENV test cases for max mailbox and message sizes
* tests(refactor): Revise ENV test cases for mailbox and message limits v2
Removes the extra variables and filtering in favour of explicit values instead of matching for comparison.
- Easier at a glance to know what is actually expected.
- Additionally reworks the quota limit checks in other test cases. Using a different formatter for `doveadm` is easier to match the desired value (`Limit`).
* chore: Sync improvement from `tests.bats` master
---
NOTE: This PR has been merged to avoid additional maintenance burden without losing the improvements. It was not considered complete, but remaining tasks were not documented in the PR.
* postfix: remove smtpd_sasl_auth_enable global setting
* tests: disable auth on 25 port
* tests: revert ldap-smtp-auth-spoofed-sender-with-filter-exception.txt
* Skip failing test
The test seems to have been broken from the beginning.
Sadly, no LDAP maintainers can verify. Added a TODO item if ever a LDAP maintainer comes around.
* Apply PR feedback
---------
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
* chore: Extract out accounts test cases from `tests.bats`
Standard test file format, the test cases have been copied over unmodified.
* chore: Revise test case descriptions
* tests(refactor): `accounts.bats`
Revised test cases:
- Some common test case logic extracted to test methods.
- Update direct user management commands to use the `setup email ...` variants.
- Improved assertions.
- Removed `sleep 2` lines as the need for that is ambiguous (may no longer be relevant?)
- Additional commentary for maintaining
- Two test cases for missing `postfix-accounts.cf` opted to just run the image without any volumes instead, as the `without-accounts/` folder was empty anyway. 2nd test case can instead use a single `docker run` to check the newly created`postfix-accounts.cf` content.
- `test/config/without-accounts/` remains as `open_dkim.bats` presently uses it.
* chore: Remove unnecessary account removal assert
Traced this back to the original PR where it appears to have been a typo and was probably intended as a cleanup on the `user4` account. Not necessary, removing.
* chore: Rename `accounts.bat` -> `account_management.bats`
---------
* feedback: Avoid `ls` for detecting directories
Replace `ls -d` approach from original test cases
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
* feedback: Remove asserting empty output on failure
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
* chore: Use a common method to check domain and fqdn config
* chore: Shift other test cases into shared test methods
* chore: Add another shared method for checking mail headers
* chore: Add another shared method for checking hostname
* refactor: Improve quality of shared test methods
Based on changes from an earlier closed hostname PR from Oct 2021 with additional revision to use `assert_output` and more thorough checking of values expected in output.
* chore: Move clean shutdown test to `process-check-restart.bats`
This was originally a single test case in `tests.bats` intended for `supervisord` testing.
It seems at some point it got reassigned to a hostname override test container, and then migrated to separate test file for hostname override test by accident.
It now belongs in the correct place again, as hostname config should have nothing to do with a graceful shutdown?
* chore: Prepare for migrating to use `test/helper/setup.bash`
* chore: Rename containers and configured FQDN settings
* chore: Convert to using common container setup helpers
Wait for SMTP port is left at the end to avoid additional start-up delays.
* chore: Use `_run_in_container_bash` helper
* chore: Be more specific on matching mail headers
- I could do multiple container grep calls instead, but opted to match by lines in file. This better ensures values are being matched to the correct lines.
- Renamed the test case descriptions.
- Expanded test coverage of the 4th container as it represents another DNS config, while the 3rd is just the 4th container with the `SRS_DOMAINNAME` env added, no value in more coverage there.
* chore: Remove redundant test coverage in `tests.bats`
These checks are performed in `mail_hostname.bats` with better coverage.
* chore: Move each containers setup into it's own test-case instead
* chore: Re-arrange container name IDs
The original `fqdn-with-subdomain` is now `with-nis-domain` which is more accurate. A new test case will properly cover the default `--hostname` only config that is not a bare domain.
* chore: Re-arrange test cases to align with new ID ordering
This commit just shifts the test cases, no new changes to any content beyond that.
* chore: Add new test case for default config
* chore: Review feedback `_run_in_container_bash` to `_run_in_container`
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
* chore: Additional review feedback
- Fix a suggested change bug with quote wrapping an interpolated variable.
- Convert two other `_bash` methods that were missed from review.
- Apply the last two suggested changes from review.
* chore: `_exec_in_container_bash` to `_exec_in_container`
The `| head -n 1` can be dropped if we know for sure it's only one line, which is what we expect. Quotes can then be dropped too.
---------
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
* chore: Co-locate process checking and process restart verification
Extract the test cases for checking a process is running and properly restarts from various test files into a single one:
Core (always running):
opendkim, opendmarc, master (postfix)
ENV dependent:
amavi (amavisd-new), clamd, dovecot, fail2ban-server (fail2ban), fetchmail, postgrey, postsrsd, saslauthd
These now run off a single container with the required ENV and call a common function (the revised version in parallel test cases).
* fix(saslauthd): Quote wrap supervisor config vars
`saslauth.conf` calls `-O` option for most commands defined with an ENV that may be empty/null. This would cause the process to silently fail / die.
This doesn't happen if quote wrapping the ENV, which calls `-O` with an empty string.
Not necessary, but since one of `postgrey` ENV were quote wrapped in `supervisor-app.conf`, I've also done the same there.
* fix(postsrsd): Change supervisor `autorestart` policy to `true`
The PR that introduced the config switched from `true` to `unexpected` without any context. That prevents restart working when the process is killed. Setting to `true` instead will correctly restart the service.
* chore: Remove disabled postgrey test file
`mail_with_postgrey_disabled_by_default.bats` only checked the migrated test cases, removed as no longer serving a purpose.
* tests(refactor): Make `_should_restart_when_killed()` more reliable
The previous version did not ensure that the last checks process was actually restarted, only that it was running.
It turns out that `pkill` is only sending the signal, there can be some delay before the original process is actually killed and restarted.
This can be identified with `pgrep --older <seconds>`. First ensure the process is at a specified age, then after killing check that the process is not running that is at least that old, finally check that there is a younger process actually running.. (_could fail if a process doesn't restart, or there is a delay such as imposed by `sleep` in wrapper scripts for postfix and fail2ban_)
The helper method is not used anywhere else now, move it into this test instead. It has been refactored to accomodate the needs for `--older`, and `--list-full` provides some output that can be matched (similar for `pkill --echo`).
* test(docs): Add inline notes about processes
* chore: Compress test cases into single case with loop
Moves the list of processes into array vars to iterate through instead.
If a failure occurs, the process name is visible along with line number in `_should_restart_when_killed()` to identify what went wrong.
* chore: Handle `FETCHMAIL_PARALLEL=1` process checks as well
* tests: Add test case for disabled ENV
Additional coverage to match what other test files were doing before, ensuring that these ENV can prevent their respective service from running.
* chore: Move `clamd` enabled check to it's own test case
Not sure about this.
It reduces the time of CPU activity (sustained full load on a thread) and increase in memory usage (1GB+ loading signatures database), but as a separate test case it also adds 10 seconds without reducing the time of the test case it was extracted from.
* chore: Make `disabled` variant the 1st test case
* fix: Adjust test cases to pass when using slower wrapper scripts
* tests(refactor): `mail_fetchmail.bats` updated to new format
Additionally merges in the parallel test file.
* chore: Move `config/fetchmail.cf` into separate sub-directory
Keep out of the default base config for tests.
* chore: Change `fetchmail.cf` FQDNs to `.test` TLD
Changed the first configs remote and local user values to more clearly document what their values should represent (_and that they don't need to be a full mail address, that's just what our Dovecot is configured with for login_).
Shifted the `here` to the end of the `is` line. It's optional syntax, only intended to contrast with the remote `there` for readability.
Additionally configured imap protocol. Not tested or verified if that's correct configuration for usage with imap protocol instead. The fetchmail feature tests are currently lacking.
Added an inline doc into the fetchmail test to reference a PR about the importance of the trailing `.` in the config. Updated the partial matching to ensure it matches for that in the value as well.
* chore: Finalize `process-check-restart.bats`
Few minor adjustments. The other ENV for clamd doesn't seem to provide any benefit, trim out the noise. Added a note about why it's been split out.
Fetchmail parallel configs are matching the config file path in the process command that is returned. The `.rc` suffix is just to add further clarity to that.
* tests(refactor): `mail_changedetector.bats` - Leverage DRY methods
`supervisorctl tail` is not the most reliably way to get logs for the latest change detection and has been known to be fragile in the past.
We can instead read the full log for the service directly with `tac` and `sed` to extract all log content since the last change detection.
Common asserts have also been extracted out into separate methods.
* tests(chore): Remove sleep and redundant change event
Container 1 is still blocked at this point from an existing lock and change event.
Make the lock stale immediately and no extra sleep is required when paired with the helper method to wait until the event is processed (which should remove the stale lock).
* tests(refactor): Add more DRY methods
- Simplify the test case so it's easier to grok.
- 2nd test case (blocking) extracts out initial setup into a separate method and merges the later service restart logic which is redundant.
- Additional comments for improved context of what is going on / expected.
* tests(chore): Revise the change detection helper method
- Add explicit counting arg to change detection support.
- Extract revised logic into it's own generic helper method.
- Utilize this for a separate method that monitors for a change event having started, but not waiting for completion.
This allows dropping the 40 sec of remaining `sleep` in `mail_changedetector` test. It was also required due to potentially missing the timing of a change event completing concurrently in a 2nd container that needed to be waited on and then checked.
* tests(chore): Migrate to current test conventions
- Switch to common container setup helpers
- Update container name and change usage to variables instead.
- Adopt the new convention of prefix variable for test cases (revised test case descriptions).
* tests(chore): Remove legacy change detection
This has since been replaced with the new helper watches the `changedetector` service logs directly instead of only detecting a change has occurred via checksum comparison.
No tests use this method anymore, it was originally for `tests.bats`. Thus the tests in `test_helper.bats` are being dropped too. The new helper has test coverage in `changedetector` tests.
* chore: Lock removal should not incur `sleep 5` afterwards
- A new lock should be created by this script after removal. The sleep doesn't help avoid a race condition with lock file creation after removal.
- Reduces test time as a bonus.
- Added some additional comments to test.
* tests(chore): `tls_letsencrypt.bats` leverage improved change detection
- No need to wait on the change detection service anymore during container startup.
- No need to count change events processed either as waiting a fixed duration is no longer relied on.
- This makes the reload count method redundant, dropped.
* tests(chore): Convert `setup-cli.bats` to new test conventions
This test file was already adapted to the original common setup helpers.
- `TEST_NAME` replaced with `CONTAINER_NAME`.
- Prefix var added, test case descriptions drop explicit prefix.
- No other changes.
* tests(chore): Extract out helpers related to change-detection
- New helper file for sharing these helpers to tests.
- Includes the helpful log method from changedetector tests.
- No longer need to maintain duplicate copies of these methods during the test migration. All tests that use them are now importing the separate helper file.
- `tls_letsencrypt.bats` has switched to using the log helper.
- Generic log count helper is removed from `test_helper/common.bash` as any test that needs it in future can adapt to `helper/common.bash`.
* tests(refactor): `tls_letsencrypt.bats` remove `_get_service_logs()`
This helper does not seem useful as moving away from `supervisorctl tail` and no other tests had a need for it.
* tests(chore): Remove common setup methods from `test_helper/common.bash`
No other tests depend on this. Future tests will adopt the revised versions from `helper/setup.bash`.
Additionally updates `helper/setup.bash` comments that are no longer applicable to `TEST_TMP_CONFIG` and `CONTAINER_NAME`.
* chore: Use `|| true` to simplify setting `EXPECTED_COUNT` correctly
While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder.
`tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests.
Review may be easier via individual commit diffs and their associated commit messages describing relevant changes.
<details>
<summary>Commit message history for reference</summary>
```markdown
tests(chore): `tests.bats` - Remove redundant config
===
- ONEDIR volume support no longer relevant, this should have been dropped.
- ClamAV ENV no longer relevant as related tests have been extracted already.
- Same with the some of the SpamAssassin ENV config.
- `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead)
- Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated.
```
```markdown
tests(chore): `tests.bats` - Convert to common setup
===
ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method:
- `ENABLE_CLAMAV=0`
- `LOG_LEVEL=debug`
- `ENABLE_UPDATE_CHECK=0`
- `--hostname` + `--tty` + standard `--volume` lines
- `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary.
`wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`.
```
```markdown
tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests
===
Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation.
`dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do):
https://support.tigertech.net/sieve#the-sieve-reject-jmp
```
```markdown
tests: `tests.bats` - Extract out `checking smtp` tests
===
Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only.
Identified minimum required ENV along with which mail is required for each test case.
```
```markdown
tests(refactor): `smtp-delivery.bats`
===
- Disabled `ENABLE_SRS=1`, not necessary for these tests.
- Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox).
- Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead.
- Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines`
- x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead.
- Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`.
- Revised test case names, including using the common prefix var.
- `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output.
```
```markdown
tests: `tests.bats` - Extract out test cases for config overrides
===
Slight improvement by additionally matching `postconf` output to verify the setting is properly applied.
```
```markdown
tests: `tests.bats` - Extract out Amavis SpamAssassin test case
===
Removes the need for SpamAssassin ENV in `tests.bats`.
```
</details>
Allows for using `load` with an absolute path instead of a relative one, which makes it possible to group tests into different directories.
Parallel tests differ slightly, loading the newer `helper/common.bash` and `helper/setup.bash` files instead of the older `test_helper/common.bash` which serial tests continue to use.
- `test_helper.bats` needs more work than this PR provides to be compatible with parallel tests, so must remain as a serial test for now.
- `spam_bounced.bats` had failures as a serial test, but works well converted to a parallel test in a future commit.
