`tls.bash` helper was adapted to the new helper scripts location. The `setup.bash` helper saw a bugfix (expanding the array properly) and updates the container default config to configure for IPv4 explicitly.
The IPv4 default was added after recent Docker pushes and I saw weird IPv6 related errors in the logs.. now we're sure IPv4 is the default during tests.
Added functionality to check if a process is running:
- This change adds a helper function to check whether a program is running inside a container or not.
- This added the need for a function like `_run_in_container` but allowing for providing an explicit container name.
- Future PRs can use this helper function now to check whether a process is running or not. This was done for the tests of Fail2Ban, but can be used for other tests in the future as well.
---
chore: Restructured BATS flags in `Makefile`
The `Makefile` has seen a bit of a restructuring when it comes to flags:
1. The `MAKEFLAGS` variables is used by `make`, and allows for adding additional flags that can be used within in recursive calls (via `$(MAKE)`) too, thus DRY approach.
2. The flags for calling BATS were adjusted. `--no-parallelize-within-files` has been added as well to ensure tests _inside_ a single file are run sequentially.
`dms-test` prefix matching changed to expect a `_` suffix as a delimiter.
---
docs: Add a note regarding output from running tests in parallel
As per deprecation notice from v11.3 release notes, and a related prior PR; this ENV is to be removed.
It's no longer considered useful, and none of the tests that configured it were actually using it for relaying anything.
These updates support running tests that have been relocated into `serial` and `parallel/set*` directories.
- `make tests` now calls the two make targets beneath it. The only difference is that `serial` continues the "1 test at a time" approach used prior to this PR, while the `parallel` target increases the `--jobs` arg to run multiple tests concurrently (_configured by `PARALLEL_JOBS`_).
- The `test/%` target leverages Bash syntax magic to ease running single tests without providing the exact path.
- This syntax also supports providing multiple test names (eg: `make test/clamav,template`) to run.
- `**` (globstar) allows for future improvements that can group multiple test files into sub-directories by their scope (eg: anti-spam, ssl, etc).
---
chore: Add `shopt -s globstar` to other targets
I realized that other targets should have this as well in case it is not set.
It is better to be more explicit here than to have weird errors due to `**` not expanding properly.
---
fix(Makefile): Add back `.PHONY` targets
I encountered `make` telling me the target was already up-to-date, which of course is nonsense.
I therefore added back the `.PHONY` targets to ensure tests are always run.
---
docs: Added instructions for running a single test
See https://github.com/docker-mailserver/docker-mailserver/pull/2857/files#r1008582760
* outsourcing env variable setup
This commit contains major parts of the work of refactoring the setup
and usage of environment variables. It outsources the setup into its own
script and provides dedicated functions to be executed at a later point in time.
A **new** env variable was added: `USER_PROVISIONG` which provides a
better way of defining which method / protocol to use when it comes to
setting up users. This way, the `ENABLE_LDAP` variable is deprecated,
but all of this is backwards compatible due to a "compatibility layer", a function provided by the new variables script.
This is not a breaking change. It mostly refators internal scripts. The
only change facing the user-side is the deprecation of `ENABLE_LDAP`. We
can prolong the period of deprecation for this variable as long as we
want, because the new function that ensures backwards compatibility
provides a clean interface for the future.
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* chore: Remove `SYS_PTRACE` capability from docs and configs
* chore: Remove `SYS_PTRACE` capability from tests
Doesn't seem to be required. It was originally added when the original change detection feature PR apparently needed it to function.
Dovecot master accounts can now be configured in DMS via `setup.sh`.
A master account is useful for administration purposes, or to perform mailbox backups of every user account over IMAP.
Upstream Docs: https://doc.dovecot.org/configuration_manual/authentication/master_users/
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Removed typo "logs".
Removed warning that Docker volumes are strongly recommended, as this can lead new users in the wrong direction (bind mounts are now the default).
Altering line 8, mentioning the default of bind mounts.
* first adjustments to use Fail2Ban with nftables
* replace `iptables` -> `nftables` and adjust tests
nftables lists IPs a bit differently , so the order was adjusted for the
tests to be more flexible.
* line correction in mailserver.env
* change from `.conf` -> `.local` and remove redundant config
* revert HEREDOC to `echo`
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* added new `_log` function
With `_log`, the `_notify` method wa rendered obsolete. `_notify` was
not completely removed due to test failures in `check-for-changes.sh`.
The new `_log` function properly uses log levels such as `trace`,
`debug`, `info`, `warn` and `error`. It provides a cleaner solution
and renders `DMS_DEBUG` obsolete too (as only `_notify` depends on it).
* converted all helper script to new `_log` function
* converted all startup stacks to new `log` function
* `start-mailserver.sh` now uses new `_log` function
* final test and misc small script adjustments
* updated documentation
The new setup will now set env variables on one place and on one place
only. The old setup used two separate places wich is not DRY and
confusing.
Some default values changed:
1. PFLOGSUMM_TRIGGER: logrotate => none
2. REPORT_SENDER: mailserver-report@HOSTNAME => mailserver-report@DOMAIN
3. REPORT_RECIPIENT: "0" => POSTMASTER_ADDRESS
One env variable was renamed: REPORT_INTERVAL => LOGROTATE_INTERVAL
I believe these defaults to be more sensible, especially the REPORT_RECIPIENT
address. The PFLOGSUMM_TRIGGER value was changed to `none` because otherwise
people would start getting daily Postfix log summary reports automatically.
Now, this is opt-in, and reports are sent only when enabled properly.
Some of the variables changed were marked as deprecated. I removed the note,
as the variables now bear some (sane) defaults again for other variables
(i.e.) REPORT_RECIPIENT is now default for other recipient addresses.
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* docs(deps): bump mkdocs-material to v8.2.1
* feat(docs): enable mermaid integration
Configuration based on https://squidfunk.github.io/mkdocs-material/reference/diagrams/?h=mermaid#configuration
* fix: allow yaml value mapping
* chore: Adopt mkdocs-material mermaid integration support
Supported by the docs generator now, we no longer need to rely on external image generator or live editor link (both relied on large base64 encoding of mermaid markup). SVG will be rendered by docs now, although a little different style (can be fixed with custom CSS).
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* follow up on #2383
Fixes a documentation error by which a list would not be rendered
correctly. This has been taken care of.
* update the `README.md`
I felt the need to update the README for several reasons:
1. LDAP issues that the core maintainers team cannot really resolve
2. Cleaning up the somewhat messy structure near the end
The first point goes without explanantion. The second points includes:
2.1. The tagging convention is now easier to read and understand
2.2. Some bullut points or notes have been inlined to "stick" more to
the content that it actually belongs to
2.3. The note about the "old" `setup.sh` for DMS `10.1.0` has been
removed as it is obsolete now. We encourage users to upgrade to
`10.4.0` anyways.
2.4. The markdown code highlighting is now using `CONSOLE` instead of
`BASH` because `CONSOLE` is more appropriate.
2.5. Capitalized headings
2.6. Updated the section about `./setup.sh help` to be in one place now
instead of two
2.7. DKIM key generation does now not interfere with user account
creation.
* adjusted content to PR suggestions
