Instead of using `etc/rspamd/override.d/dkim_signing.conf`, we will now
be using `/tmp/docker-mailserver/rspamd/override.d/dkim_signing.conf`.
The new location is persisted (and linked again during startup) and
hence better suited.
* chore: Adjust default DKIM size (`open-dkim`) from 4096-bit to 2048-bit
4096-bit is excessive in size for DKIM key. 2048-bit is plenty.
* chore: Additional revisions to `open-dkim` command help output
- The examples use `keysize 2048`, but as that's the new default it makes sense to change that.
- Other help text was also revised.
- Last example for domains did not need to demonstrate the other options. Changed example domains to more appropriate values.
* docs: Revise DKIM docs
Primarily for the change in default key size, but does revise some text to better communicate to the user.
- While the referenced RFC advises 512-bit to 2048-bit key size, we now explicitly discourage `512-bit` as it's not secure. `1024-bit` is still likely safe for most, but `2048-bit` is a good default for those not rotating their keys.
- Adjusted the domains example to match the new `setup config dkim domain` domains example.
- Tip for changing default key size changed to "info" with added clarity of lowering security or increasing it (excessively).
- Rspamd section is minor formatting changes, with the exception of clarifying the "main domain" for the mail accounts is assumed as the DMS FQDN with any subdomain (like `mail.`) stripped away. This is not great, but a legacy issue that needs to be addressed in future.
- `docs-rspamd-override-d` ref removed, and usage replaced with equivalent ref `docs-rspamd-config-dropin`, while `docs-rspamd-config-declarative` ref was not in use and also removed.
- Revised the `<selector>.txt` DNS formatting info section to better communicate with the reader. Additionally it had mixed usage of default `mail` and custom `dkim-rsa` selectors (_file content and output_).
* docs: Sync DKIM commands help messages and update DKIM docs for LDAP
- Adopt the help options format style from the `rspamd-dkim` into `open-dkim` command. And convert `./setup.sh` to `setup`. `selector` option has been implemented. for a while now.
- Update `rspamd-dkim` examples help output to align with `open-dkim` command examples.
- Give both DKIM command tools a consistent description. The two tools differ in support for the `domain` option (_implicit domain sourcing for default account provisioner, and support for multiple domains as input_).
- DKIM docs for LDAP domain support revised to better communicate when explicit domain config is necessary.
* tests: Adjust test-cases for `setup config dkim` change
`rspamd_dkim.bats`:
- Update assert for command help output.
- Don't bother creating a DKIM key at 512-bit size.
`setup_cli.bats`:
- Update assert for command help output of the `setup config dkim` (OpenDKIM) command.
* docs: Update DKIM section for large keys to newer RFC
The linked discussion from 2021 does mention this updated RFC over the original. That removes outdated advice about `512-bit` key length support.
The discussion link is still kept to reference a comment for the reader to better understand the security strength of 2048-bit RSA keys and why larger keys are not worthwhile, especially for DKIM.
* docs: Extract out common DKIM generation command from content tabs
Should be fine to be DRY here, not specific to `open-dkim` or `rspamd` generation/support. Previously rspamd lacked support of an equivalent command in DMS.
* docs: DKIM refactoring
- Shifted out the info admonition on key size advice out of the content tabs as it's now generic information.
- Indented the 4096-bit warning into this, which is less of a concern as the default for our DKIM generation tools is consistently 2048-bit now.
- Reworked the LDAP and Rspamd multi-domain advice. To avoid causing a bad diff, these sections haven't been moved/merged yet.
* docs: Revise DKIM docs
Advice for managing domains individually with LDAP and Rspamd extracted out of the content tabs. Default domain behaviour explained with extra info about OpenDKIM + FILE provisioner sourcing extra domains implicitly.
* fix: Workaround `postconf` write settle logic
After updating `main.cf`, to avoid an enforced delay from reading the config by postfix tools, we can ensure the modified time is at least 2 seconds in the past as a workaround. This should be ok with our usage AFAIK.
Shaves off 2+ seconds roughly off each container startup, reduces roughly 2+ minutes off tests.
* chore: Only modify `mtime` if less than 2 seconds ago
- Slight improvement by avoiding unnecessary writes with a conditional check on the util method.
- Can more comfortably call this during `postfix reload` in the change detection cycle now.
- Identified other tests that'd benefit from this, created a helper method to call instead of copy/paste.
- The `setup email restrict` command also did a modification and reload. Added util method here too.
* tests(fix): `mail_smtponly.bats` should wait for Postfix
- `postfix reload` fails if the service is not ready yet.
- `service postfix reload` and `/etc/init.d/postfix reload` presumably wait until it is ready? (as these work regardless)
* chore: Review feedback - Move reload method into utilities
## Quick Summary
Resolves a `TODO` task with `addmailuser`.
## Overview
The main change is adding three new methods in `common.bash`, which replace the completion delay in `addmailuser` / `setup email add` command.
Other than that:
- I swapped `sh -c 'addmailuser ...'` to `setup email add ...`.
- Improved three tests in `setup-cli.bats` for `setup email add|update|del` (_logic remains effectively the same still_).
- Rewrote the `TODO` comment for `setup-cli.bats` test on `setup email del` to better clarify the concern, but the test itself was no longer affected due to changes prior to this PR, so I enabled the commented out assertion.
- Removed unnecessary waits. The two `skip` tests in `test/tests.bats` could be enabled again after this PR.
- Additional fixes to tests were made during the PR (see discussion comments for details), resolving race conditions.
Individual commit messages of the PR provide additional details if helpful.
---
## Relevant commit messages
* chore: Remove creation delay in `addmailuser`
This was apparently only for supporting tests that need to wait on account creation being ready to test against.
As per the removed inline docs, it should be fine to remove once tests are updated to work correctly without it.
* tests(feat): Add two new common helper methods
`wait_until_account_maildir_exists()` provides the same logic `addmailuser` command was carrying, to wait upon the account dir creation in `/var/mail`.
As this was specifically to support tests, it makes more sense as a test method.
`add_mail_account_then_wait_until_ready()` was added to handle the common pattern of creating account and waiting on it. An internal assert will ensure the account was successfully created first during the test before attempting to wait.
* tests(feat): Add common helper for waiting on change event to be processed
The current helper is more complicated for no real benefit, it only detects when a change is made that would trigger a change event in the `changedetector` service. Our usage of this in tests however is only interested in waiting out the completion of the change event.
Remove unnecessary change event waits. These waits should not be necessary if handled correctly.
* tests: `addmailuser` to `add_mail_account_then_wait_until_ready mail()`
This helper method is used where appropriate.
- A password is not relevant (optional).
- We need to wait on the creation on the account (Dovecot and `/var/mail` directory).
* tests: `setup-cli` revise `add`, `update`, `del` tests
The delete test was failing as the `/var/mail` directory did not yet exist.
There is now a proper delay imposed in the `add` test now shares the same account for both `update` and `del` tests resolving that failure.
Additionally tests use better asserts where appropriate and the wait + sleep logic in `add` has been improved (now takes 10 seconds to complete, approx half the time than before).
The `del` test TODO while not technically addressed is no longer relevant due to the tests being switched to `-c` option (there is a separate `no container` test file, but it doesn't provide a `del` test).
* tests(fix): Ensure Postfix is reachable after waiting on ClamAV
There is not much reason to check before waiting on ClamAV.
It is more helpful to debug failures from `nc` mail send commands if we know that nothing went wrong inbetween the ClamAV wait time.
Additionally added an assertion which should provide more information if this part of the test setup fails again.
* tests(fix): Move health check to the top
This test is a bit fragile. It relies on defaults for the healthcheck with intervals of 30 seconds.
If the check occurs while Postfix is down due a change event from earlier tests and the healthcheck kicks in at that point, then if there is not enough time to refresh the health status from `unhealthy`, the test will fail with a false-positive as Postfix is actually working and up again..
* tests(fix): Wait on directory to be removed
Workaround that tries not to introduce heavier delays by waiting on a full change event to complete in the previous `email update` if possible.
There is a chance that the account has the folder deleted, but restored from an active change event (for password update, then the account delete).
See the associated PR for more detailed commentary on specific changes.
### Commands refactored:
- User (**All:** add / list / update / del + _dovecot-master variants_)
- Quota (**All:** set / del)
- Virtual Alias (**All:** add / list /del)
- Relay (**All:** add-relayhost / add-sasl / exclude-domain)
### Overall changes involve:
- **Fairly common structure:**
- `_main` method at the top provides an overview of logical steps:
- After all methods are declared beneath it (_and imported from the new `helpers/database/db.sh`_), the `_main` is called at the bottom of the file.
- `delmailuser` additionally processes option support for `-y` prior to calling `_main`.
- `__usage` is now consistent with each of these commands, along with the `help` command.
- Most logic delegated to new helper scripts. Some duplicate content remains on the basis that it's low-risk to maintenance and avoids less hassle to jump between files to check a single line, usually this is arg validation.
- Error handling should be more consistent, along with var names (_no more `USER`/`EMAIL`/`FULL_EMAIL` to refer to the same expected value_).
- **Three new management scripts** (in `helpers/database/manage/`) using a common structure for managing changes to their respective "Database" config file.
- `postfix-accounts.sh` unified not only add and update commands, but also all the dovecot-master versions, a single password call for all 4 of them, with a 5th consumer of the password prompt from the relay command `addsaslpassword`.
- These scripts delegate actual writes to `helpers/database/db.sh` which provides a common API to support the changes made.
- This is more verbose/complex vs the current inline operations each command currently has, as it provides generic support instead of slightly different variations being maintained, along with handling some edge cases that existed and would lead to bugs (notably substring matches).
- Centralizing changes here seems wiser than scattered about. I've tried to make it easy to grok, hopefully it's not worse than the current situation.
- List operations were kept in their respective commands, `db.sh` is only really managing writes. I didn't see a nice way for removing the code duplication for list commands as the duplication was fairly minimal, especially for `listalias` and `listdovecotmasteruser` which were quite simple in their differences in the loop body.
- `listmailuser` and `delmailuser` also retain methods exclusive to respective commands, I wasn't sure if there was any benefit to move those, but they were refactored.
* chore: Split vhost helper method and use filepath vars
- Helpers `accounts.sh` and `aliases.sh` can move their vhost code into this helper.
- They share duplicate code with `bin/open-dkim` which will also leverage this vhost helper going forward.
* chore: Sync vhost generation logic into helper
- Chunky commit, but mostly copy/paste of logic into a common method.
- `bin/open-dkim` additionally wrapped relevant logic in a function call and revised inline docs.
* chore: Include LDAP vhost support
- Revises notes for LDAP vhost support.
- This now ensures LDAP users get vhost rebuilt to match the startup script for when change detection support is enabled.
- `bin/open-dkim` will additionally be able to support the default `DOMAINNAME` var (set via `helpers/dns.sh`) for LDAP users instead of requiring them to provide one explicitly.
* chore(`bin/open-dkim`): Ensure `DOMAINNAME` is properly set
- This will ensure LDAP users insert the same `DOMAINNAME` value as used during container startup.
- The container itself should panic at startup (during `helpers/dns.sh`) if this isn't configured correctly already, thus it should not introduce any breaking change to users of this utility?
* chore: Set the 2nd value as blank `_`
Line is split by a delimiter such as white-space (or via IFS: `|`), the blank `_` var is to indicate we're not interested in that value, but still leverage how `read -r` works, instead of splitting the var ourselves first thing.
* chore: Remove shellcheck disable lines
No longer applicable with the switch to `_`
* chore(`aliases.sh`): Filepath to local var `DATABASE_VIRTUAL`
* chore(`accounts.sh`): Filepath to local var `DATABASE_ACCOUNTS`
* chore(`accounts.sh`): Filepath to local var `DATABASE_VIRTUAL`
* chore(`accounts.sh`): Filepath to local var `DATABASE_DOVECOT_MASTERS`
* chore(`bin/open-dkim`): Filepaths to local vars (accounts,virtual,vhost)
* chore(`relay.sh`): Filepath to local var `DATABASE_SASL_PASSWD`
* chore: Rename method
Prior PR feedback suggested a better helper method name.
* chore: Normalize filtering config lines as input for iterating
* chore: Remove `_is_comment` helper method
No longer serving a purpose with more appropriate filter method for pre-processing the entire config file.
* fix(listmailuser): Don't parse comments
Avoids passing comments to `dovecot_quota_to_hr()` which fails to handle it and would throws errors.
* chore: Move config filter method to `helpers/utils.sh`
* chore: Extract change-detection method to it's own helper
This doesn't really belong in `helpers/ssl.sh`. Moving to it's own helper script.
* chore: Co-locate related change-detection method from container startup
It seems relevant to migrate the related support during startup for the change detection feature into this helper.
I opted to move the call from `start-mailserver.sh` into the `_setup` call at the end for a more explicit/visible location.
* chore: Move `CHKSUM_FILE` into `helpers/change-detection.sh`
It belongs there, not in `helpers/index.sh`.
* chore: Revise inline documentation
* tests(fix): Ensure correct functionality
Presently `test/test_helper.bats` is using it's own `CHKSUM_FILE` instead of sourcing the var for the filepath.
`test_helper/common.bash` was calling a method to check for changes, but this helper may not correctly detect letsencrypt related changes as these are not ENV rely on, but global vars handled by `helpers/dns.sh`, so that should be run first like it is for `check-for-changes.sh`.
* tests(chore): Use `CHKSUM_FILE` var from helper
* chore: `addmailuser` should use `CHKSUM_FILE` var
* chore: Update `check-for-changes.sh` log message with correct path
Dovecot master accounts can now be configured in DMS via `setup.sh`.
A master account is useful for administration purposes, or to perform mailbox backups of every user account over IMAP.
Upstream Docs: https://doc.dovecot.org/configuration_manual/authentication/master_users/
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* chore: Remove `DATABASE` fallback ENV
This was introduced without any mention or need, thus removing until a real use-case requires it.
* chore: Remove `USER_DATABASE` fallback ENV
Likewise, nothing requires this to be customizable.
* chore: Consistently use single quote strings
* first adjustments to use Fail2Ban with nftables
* replace `iptables` -> `nftables` and adjust tests
nftables lists IPs a bit differently , so the order was adjusted for the
tests to be more flexible.
* line correction in mailserver.env
* change from `.conf` -> `.local` and remove redundant config
* revert HEREDOC to `echo`
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* refactored `daemon-stack.sh`
A new method was introduced to uniformaly start daemons and log output
accordingly. The methods for daemon start were renamed (plural ->
singular), therefore the adjustments in `start-mailserver.sh`.
* cleaned Fetchmail setup from `daemon-stack.sh`
Not sure why, but the Fetchmail setup was somehow happening in
`daemon-stack.sh` - this is not supposed to be the case. I relocated the
setup into `setup-stack.sh`, where it belong.
* delete old, unnecessary script in `target/bin/`
These are unused leftovers from the last commit, that relocated the
setup of Fetchmail into `setup.stack.sh`.
* corrected changedetector function name
* Apply suggestions from code review
* adjusted `debug-fetchmail` script
It is absolutely fine to source `setup-stack.sh` because sourcing the
script does not execute a single function (by desing of the script).
This way, we retain functionality.
* praise be ShellCheck
* added `log.sh` to `debug-fetchmail` as a dependency
* final cleanup
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* refactored scripts located under `target/bin/`
The scripts under `target/bin/` now use the new log and I replaced some
`""` with `''` on the way. The functionality stays the same, this mostly
style and log.
* corrected fail2ban (script and tests)
* corrected OpenDKIM log output in tests
* reverted (some) changes to `sedfile`
Moreover, a few messages for BATS were streamlined and a regression in
the linting script reverted.
* apple PR feedback
* improve log output from `fail2ban` script
The new output has a single, clear message with the '[ ERROR ] '
prefix, and then output that explains the error afterwards. This is
coherent with the logging style which should be used while providing
more information than just a single line about IPTables not functioning.
* simplified `setquota` script
* consistently named the `__usage` function
Before, scripts located under `target/bin/` were using `usage` or
`__usage`. Now, they're using `__usage` as they should.
* improved `sedfile`
With `sedfile`, we cannot use the helper functions in a nice way because
it is used early in the Dockerfile at a stage where the helper scripts
are not yet copied. The script has been adjusted to be canonical with
all the other scripts under `target/bin/`.
* fixed tests
* removed `__usage` from places where it does not belong
`__usage` is to be used on wrong user input, not on other failures as
well. This was fixed in `delquota` and `setquota`.
* apply PR review feedback
* added new `_log` function
With `_log`, the `_notify` method wa rendered obsolete. `_notify` was
not completely removed due to test failures in `check-for-changes.sh`.
The new `_log` function properly uses log levels such as `trace`,
`debug`, `info`, `warn` and `error`. It provides a cleaner solution
and renders `DMS_DEBUG` obsolete too (as only `_notify` depends on it).
* converted all helper script to new `_log` function
* converted all startup stacks to new `log` function
* `start-mailserver.sh` now uses new `_log` function
* final test and misc small script adjustments
* updated documentation
