* feat: add support for MTA-STS for outgoing mails
* Hook-up mta-sts-daemon into basic process handling test
* fix: Call python script directly
The python3 shebang will run it, which will now meet the expectations of the process testing via pgrep. fail2ban has the same approach.
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* chore: Extract out Dovecot Quota test cases into new test file
Test cases are just cut + paste, no logic changed there yet.
* chore: Rename test case descriptions
* chore: Use `setup ...` methods instead of direct calls
* chore: Adjust `_run_in_container_bash` to `_run_in_container`
Plus some additional bug fixes in the disabled test case
* tests(refactor): Revise ENV test cases for max mailbox and message sizes
* tests(refactor): Revise ENV test cases for mailbox and message limits v2
Removes the extra variables and filtering in favour of explicit values instead of matching for comparison.
- Easier at a glance to know what is actually expected.
- Additionally reworks the quota limit checks in other test cases. Using a different formatter for `doveadm` is easier to match the desired value (`Limit`).
* chore: Sync improvement from `tests.bats` master
---
NOTE: This PR has been merged to avoid additional maintenance burden without losing the improvements. It was not considered complete, but remaining tasks were not documented in the PR.
- Make this easier to find when browsing the example environment file.
- Adjust ENV documentation to properly mark the actual default value.
---------
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Some deployment scenarios are not compatible with `5000:5000` static vmail user with `/var/mail`. This feature allows adjusting the defaults to a UID / GID that is compatible.
Signed-off-by: vincent <vincent@ducamps.win>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* chore: Drop management of `SASLAUTHD_*` ENV
- `variables-stack.sh` does not need to manage all these extra ENV or store them. They're not used anywhere else.
- `saslauthd.sh` is the only consumer of these ENV which are effectively direct key/value mappings, with some defaults provided / inherited.
Instead of trying to conditionally support key/value pairs when ENV is set, we could instead use `sed` to delete lines with empty values.
* chore: Drop fallbacks + update configs to match docs
- Drop deprecated support:
- `DOVECOT_HOSTS` is an ENV deprecated since v10.
- Fallback for missing URI scheme introduced for Dovecot and SASLAuthd in v10.
- Adding error log message when no LDAP URI scheme is detected for the supported ENV (when set).
- Docs updated for ENV to reflect the mandatory requirement. `mailserver.env` partially synced equivalent sections.
- Provided base LDAP configs (for overriding) likewise updated from `domain.com` to `example.com`.
- LDAP test updated for required `ldap://` URI scheme. Common ENV shared across LDAP configs hoisted out of the Postfix group.
* chore: Remove unset lines in generated `saslauthd.conf`
- Deprecation startup script check is kept for `ENABLE_LDAP=1` but adjusted to emit an error instead. It can be dropped in a future release. Just a precaution for those who mistakenly update (_possibly via automation_) without checking the release notes, an error log is somewhat helpful, although it could alternatively panic?
- Docs updated to remove the `ENABLE_LDAP=1` usage
- ENV docs updated to reference a maintained LDAP image.
- Changelog includes the breaking change, and slight revision to prior release mention of deprecation.
* adjust learning of ham
See #3333
When moving a mail from the Junk folder to the Trash folder, the mail
previously classified as ham due to the wildcard match of `*`. Because
the syntax does not allow for negation, we can only change the behavior
in a way that mails are learned as ham when they are moved into `INBOX`
from `Junk`. This is reasonable though.
* adjust tests accordingly
* adjust docs accordingly
The user management docs are now one page, because the division between
accounts and aliases is useless because there simply isn't enough
content to justify the split. I improved and updated the text a bit.
* added options to toggle OpenDKIM & OpenDMARC
rspamd can provide DKIM signing and DMARC checking itself, so users
should be able to disable OpenDKIM & OpenDMARC. The default is left at
1, so users have to to opt-in when the want to disable the features.
* misc small enhancements
* adjusted start of rspamd
The order of starting redis + rspamd was reversed (now correct) and
rspamd now starts with the correct user.
* adjusted rspamd core configuration
The main configuration was revised. This includes AV configuration as
well as worker/proxy/controller configuration used to control the main
rspamd processes.
The configuration is not tested extensively, but well enough that I am
confident to go forward with it until we declare rspamd support as
stable.
* update & improve the documentation
* add tests
These are some initial tests which test the most basic functionality.
* tests(refactor): Improve consistency and documentation for test helpers (#3012)
* added `ALWAYS_RUN` target `Makefile` recipies (#3013)
This ensures the recipies are always run.
Co-authored-by: georglauterbach <44545919+georglauterbach@users.noreply.github.com>
* adjusted rspamd test to refactored test helper functions
* improve documentation
* apply suggestions from code review (no. 1 by @polarthene)
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* streamline heredoc (EOM -> EOF)
* adjust rspamd test (remove unnecessary run arguments)
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* chore: Drop ENV `ENABLE_POSTFIX_VIRTUAL_TRANSPORT`
* tests(chore): Remove redundant `dovecot-lmtp` config
None of this is needed. Only relevant change is changing the LMTP service listener for Dovecot and that can be delegated to `user-patches.sh`.
* tests(refactor): Use `user-patches.sh` instead of replacing config file
The only relevant changes in `test/config/dovecot-lmtp` regarding LMTP was:
- `/etc/dovecot/dovecot.conf` (`protocols = imap lmtp`) and `/etc/dovecot/protocols.d/` (`protocols = $protocols lmtp`).
- `conf.d/10-master.conf` only changed the LMTP service listener from a unix socket to TCP on port 24 (_this was the only change required for the test to pass_).
None of those configs are required as:
- `protocols = imap pop3 lmtp` [is the upstream default](https://doc.dovecot.org/settings/core/#core_setting-protocols), no need to add `lmtp`.
- The LMTP service listener is now configured for the test with `user-patches.sh`.
* tests(refactor): `mail_lmtp_ip.bats`
- Converted to new testing conventions and common container helpers.
- `ENABLE_POSTFIX_VIRTUAL_TRANSPORT` was not relevant, dropped.
- Revised test cases, logic remains the same.
- Large custom config used was not documented and doesn't appear to serve any purpose. Simplified by replacing with a single modification with `user-patches.sh`.
- Added some additional comments for context of test and improvements that could be made.
* tests(chore): Adjust comments
The comment from `mail_hostname` provides no valid context, it was likely copied over from `tests.bats` in Oct 2020 by accident.
The email sent is just for testing, nothing relevant to LMTP.
---
Added additional comment for test to reference extra information from.
* tests(chore): Update similar log line matching
Extracts out the match pattern and formatting commands into separate vars (reduces horizontal scrolling), and includes extra docs about what the matched line should be expected to look like.
These two links have remained broken for over 6 months. Removing them.
* chore(housekeeping): Broken links
* chore: Remove broken links from `mailserver.env`
As per deprecation notice from v11.3 release notes, and a related prior PR; this ENV is to be removed.
It's no longer considered useful, and none of the tests that configured it were actually using it for relaying anything.
* outsourcing env variable setup
This commit contains major parts of the work of refactoring the setup
and usage of environment variables. It outsources the setup into its own
script and provides dedicated functions to be executed at a later point in time.
A **new** env variable was added: `USER_PROVISIONG` which provides a
better way of defining which method / protocol to use when it comes to
setting up users. This way, the `ENABLE_LDAP` variable is deprecated,
but all of this is backwards compatible due to a "compatibility layer", a function provided by the new variables script.
This is not a breaking change. It mostly refators internal scripts. The
only change facing the user-side is the deprecation of `ENABLE_LDAP`. We
can prolong the period of deprecation for this variable as long as we
want, because the new function that ensures backwards compatibility
provides a clean interface for the future.
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* first adjustments to use Fail2Ban with nftables
* replace `iptables` -> `nftables` and adjust tests
nftables lists IPs a bit differently , so the order was adjusted for the
tests to be more flexible.
* line correction in mailserver.env
* change from `.conf` -> `.local` and remove redundant config
* revert HEREDOC to `echo`
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* added new `_log` function
With `_log`, the `_notify` method wa rendered obsolete. `_notify` was
not completely removed due to test failures in `check-for-changes.sh`.
The new `_log` function properly uses log levels such as `trace`,
`debug`, `info`, `warn` and `error`. It provides a cleaner solution
and renders `DMS_DEBUG` obsolete too (as only `_notify` depends on it).
* converted all helper script to new `_log` function
* converted all startup stacks to new `log` function
* `start-mailserver.sh` now uses new `_log` function
* final test and misc small script adjustments
* updated documentation
The new setup will now set env variables on one place and on one place
only. The old setup used two separate places wich is not DRY and
confusing.
Some default values changed:
1. PFLOGSUMM_TRIGGER: logrotate => none
2. REPORT_SENDER: mailserver-report@HOSTNAME => mailserver-report@DOMAIN
3. REPORT_RECIPIENT: "0" => POSTMASTER_ADDRESS
One env variable was renamed: REPORT_INTERVAL => LOGROTATE_INTERVAL
I believe these defaults to be more sensible, especially the REPORT_RECIPIENT
address. The PFLOGSUMM_TRIGGER value was changed to `none` because otherwise
people would start getting daily Postfix log summary reports automatically.
Now, this is opt-in, and reports are sent only when enabled properly.
Some of the variables changed were marked as deprecated. I removed the note,
as the variables now bear some (sane) defaults again for other variables
(i.e.) REPORT_RECIPIENT is now default for other recipient addresses.
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
