These two links have remained broken for over 6 months. Removing them.
* chore(housekeeping): Broken links
* chore: Remove broken links from `mailserver.env`
As per deprecation notice from v11.3 release notes, and a related prior PR; this ENV is to be removed.
It's no longer considered useful, and none of the tests that configured it were actually using it for relaying anything.
* outsourcing env variable setup
This commit contains major parts of the work of refactoring the setup
and usage of environment variables. It outsources the setup into its own
script and provides dedicated functions to be executed at a later point in time.
A **new** env variable was added: `USER_PROVISIONG` which provides a
better way of defining which method / protocol to use when it comes to
setting up users. This way, the `ENABLE_LDAP` variable is deprecated,
but all of this is backwards compatible due to a "compatibility layer", a function provided by the new variables script.
This is not a breaking change. It mostly refators internal scripts. The
only change facing the user-side is the deprecation of `ENABLE_LDAP`. We
can prolong the period of deprecation for this variable as long as we
want, because the new function that ensures backwards compatibility
provides a clean interface for the future.
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* first adjustments to use Fail2Ban with nftables
* replace `iptables` -> `nftables` and adjust tests
nftables lists IPs a bit differently , so the order was adjusted for the
tests to be more flexible.
* line correction in mailserver.env
* change from `.conf` -> `.local` and remove redundant config
* revert HEREDOC to `echo`
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* added new `_log` function
With `_log`, the `_notify` method wa rendered obsolete. `_notify` was
not completely removed due to test failures in `check-for-changes.sh`.
The new `_log` function properly uses log levels such as `trace`,
`debug`, `info`, `warn` and `error`. It provides a cleaner solution
and renders `DMS_DEBUG` obsolete too (as only `_notify` depends on it).
* converted all helper script to new `_log` function
* converted all startup stacks to new `log` function
* `start-mailserver.sh` now uses new `_log` function
* final test and misc small script adjustments
* updated documentation
The new setup will now set env variables on one place and on one place
only. The old setup used two separate places wich is not DRY and
confusing.
Some default values changed:
1. PFLOGSUMM_TRIGGER: logrotate => none
2. REPORT_SENDER: mailserver-report@HOSTNAME => mailserver-report@DOMAIN
3. REPORT_RECIPIENT: "0" => POSTMASTER_ADDRESS
One env variable was renamed: REPORT_INTERVAL => LOGROTATE_INTERVAL
I believe these defaults to be more sensible, especially the REPORT_RECIPIENT
address. The PFLOGSUMM_TRIGGER value was changed to `none` because otherwise
people would start getting daily Postfix log summary reports automatically.
Now, this is opt-in, and reports are sent only when enabled properly.
Some of the variables changed were marked as deprecated. I removed the note,
as the variables now bear some (sane) defaults again for other variables
(i.e.) REPORT_RECIPIENT is now default for other recipient addresses.
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* fix: make sure the SASLAUTHD_LDAP_HOST/PROTO logic makes sense and use LDAP_SERVER_HOST as a fallback (#1983)
* chore(docs): document changes to LDAP/SASLAUTHD as of #1983
* fix!: apply default value modifications suggested in #1983https://github.com/docker-mailserver/docker-mailserver/issues/1983#issuecomment-844848224
* chore(test): Test SASLAUTHD_LDAP_SERVER with protocol and ..._SSL=0, as well as with default bind credentials
Note that there are currently no regression tests for this as there's only one setup_file, so that would require big changes to the testing methodology.
* refactor!: completely remove SASLAUTHD_LDAP_SSL and SASLAUTHD_LDAP_PROTO
Co-authored-by: Georg Lauterbach <44545919+aendeavor@users.noreply.github.com>
Co-authored-by: Frederic Werner <20406381+wernerfred@users.noreply.github.com>
* mail binary
* initial work
* make env vars available
* typo
* some fixes
* make script ugly, to satisfy linter..
* mailserver.env updated
* Version to welcome message added
* remove VERSION file references
* VERSION --> DMS_VERSION
* fetch remote version
* variable usage
* Quoting added
* edge test & docu
* dash removed
* subject changed
* re-add VERSION
* VERSION added
* new file: VERSION
* rewrite
* unnecessary additions from fail2ban PR removed
* UPDATE_CHECK_INTERVAL added
* syntax check & _log function
* comment added
* final commit
* feat: Change Postfix smtpd_tls key and cert files to chain_files
Since Postfix 3.4, `smtpd_tls_cert_file` and `smtpd_tls_key_file` have been deprecated in favor of `smtpd_tls_chain_files` which supports a list of values where a single or sequence of file paths provide a private key followed by it's certificate chain.
* feat: Dual certificate support
`smtpd_tls_chain_files` allows for multiple key+cert bundles so that you can provide different key types, such as ECDSA and RSA.
To maintain compatibility with the current CERT/KEY ENV vars only a 2nd certificate is supported.
Since Dovecot 2.2.31 a related feature is also available, but it is limited to only providing one alternative certificate via separate cert and key settings.
---
This feature enables support for multiple certificates, eg for serving modern ECDSA certs with RSA as fallback.
* chore: Refactor variable names to meet style guide
Improved some comments too.
* chore: Have function definitions respect style guide
* chore: Minor edits to comments
* chore: Expand on comments for maintenance, alert of insecure config
When `SSL_TYPE` isn't properly setup, we're still offering SSL connections but not warning in logs about the insecurity of such, or why a misconfiguration may have occurred.
This commit more clearly communicates to the user that they should look into the issue before considering deploying to production.
The `TODO` comments communicate to any future maintainer to consider treating these improper configs as disabling TLS instead.
* fix: Use `snakeoil` cert
I mistakenly thought this was placeholder text, which broke some tests. This adds the two files in the correct order (private key followed by cert/chain), to fix that issue.
* fix: Disable alt cert for Dovecot if necessary
Certain scenarios may persist state of previously configured alt cert via ENV vars that are removed from a future run. If the config is not reset to original immutable state, this will correctly disable the config from using alt cert unintentionally.
* fix: Satisfy ShellCheck lint
By switching from string var to array / list expansion, this better stores the extracted result and applies it in a manner that ShellCheck linting approves, removing the need to disable the rule.
* feat: Support dual cert test
Few tweaks to the test script allows re-purposing it for covering dual cert support as well.
* chore: Rearranged cert and key lines
A little reorganization, mostly placing private key ahead of related cert lines.
* chore: Refactor `_set_certificate`
This should make the parameters a little less confusing.
Previously was 3 parameters, but the Postfix parameter (1st) may look like two variables if you don't pay attention to the surrounding quotes; while the Dovecot parameters (2nd + 3rd) would have an opposing order. There was also a variant where the `FULLKEYCHAIN` var was passed in three times.
Now it's two params, with the 2nd param as an optional one. If the 2nd param is provided, then the two params are in the order of private key then certificate, otherwise if only a single parameter it's a single PEM file with the full cert chain and private key bundled.
This avoids implying that Postfix and Dovecot might use different files.
* chore: Document current state of `SSL_TYPE` logic better
Inlined for the benefit of anyone else maintaining this section if I'm unable to address the concerns within my own time.
* docs: ENV vars
`TLS_LEVEL=old` isn't in the codebase anymore, not likely to be relevant to retain.
No point in documenting what is considered invalid / unsupported config value in the first place for `SSL_TYPE`.
`SSL_TYPE=manual` was missing documentation for both related file path ENV vars, they've been added along with their alt fallback variants.
* chore: Update Dovecot LMTP SSL test config
Not sure how relevant this is, the file isn't complete sync with the main dovecot `10-ssl.conf` config, adding the support just in case.
* chore: Rename `FULLKEYCHAIN` to avoid confusion
There doesn't appear to be a standardized name for this type of file bundle, and `keychain` may be misleading (fullkeychain often provides macOS keychain results on search engines).
Opting for a more explicit `KEY_WITH_FULLCHAIN` name instead.
* fix: Invalid var name
`_set_certificate` refactor commit accidentally changed a var name and committed that breaking the dual cert support (thanks tests!).
* test: Refactor `mail_ssl_manual.bats`
Proper test return values instead of `wc -l` based checking.
Tests with dual cert support active, tests that feature (to better detect failure case.
Third test case was unable to verify new self-signed certificate, added new certs signed with self-signed root CA.
Adjusted openssl `CApath` parameter to use `CAfile` instead as `letsencrypt` cert was replaced thus CA cert is missing from the system trust store.
* test: Properly check for files in `mail_ssl_manual.bats`
Fixes lint error.
Also realized I was accidentally asserting a file exists in the test environment, not within the container.
Resolved that and also added an additional test case to ensure the ENV var files are valid when passed in, in the event a change misconfigures them and that the issue is identified earlier.
* chore: Apply PR review feedback
Better format some strings that had mixed quotes when they weren't necessary.
Additionally DRYed up the config path for Postfix and Dovecot within the `_setup_ssl` method.
Co-authored-by: Georg Lauterbach <infrastructure@itbsd.com>
* first migration steps
* altered issue templates
* altered README
* removed .travis.yml
* adjusting registry & repository, Dockerfile and compose.env
* Close stale issues automatically
* Integrated CI with Github Actions (#3)
* feat: integrated ci with github actions
* fix: use secrets for docker org and update image
* docs: clarify why we use -t if no tty exists
* fix: correct remaining references to old repo
chore: prettier automatically updated markdown as well
* fix: hardcode docker org
* change testing image to just testing
* ci: add armv7 as a supported platform
* finished migration steps
* corrected linting in build-push action
* corrected linting in build-push action (2)
* minor preps for PR
* correcting push on pull request and minor details
* adjusted workflows to adhere closer to @wernerfred's diagram
* minor patches
* adjusting Dockerfile's installation of base packages
* adjusting schedule for stale issue action
* reverting license text
* improving CONTRIBUTING.md PR text
* Update CONTRIBUTING.md
* a bigger patch at the end
* moved all scripts into one directory under target/scripts/
* moved the quota-warning.sh script into target/scripts/ and removed empty directory /target/dovecot/scripts
* minor fixes here and there
* adjusted workflows for use a fully qualified name (i.e. docker.io/...)
* improved on the Dockerfile layer count
* corrected local tests - now they (actually) work (fine)!
* corrected start-mailserver.sh to make use of defaults consistently
* removed very old, deprecated variables (actually only one)
* various smaller improvements in the end
* last commit before merging #6
* rearranging variables to use alphabetic order
Co-authored-by: casperklein <casperklein@users.noreply.github.com>
Co-authored-by: Nick Pappas <radicand@users.noreply.github.com>
Co-authored-by: William Desportes <williamdes@wdes.fr>
