* consistently name functions (starting with `_`) in `start-mailserver.sh`
Most of the functions that execute the different stacks during startup
were not prefixed with `_`, but all our other functions are. This has
now been fixed.
* cleanup in `start-mailserver.sh`
I adjusted the comments for all sections in the start script so they are
properly displayed again.
* first adjustments to use Fail2Ban with nftables
* replace `iptables` -> `nftables` and adjust tests
nftables lists IPs a bit differently , so the order was adjusted for the
tests to be more flexible.
* line correction in mailserver.env
* change from `.conf` -> `.local` and remove redundant config
* revert HEREDOC to `echo`
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* refactored `daemon-stack.sh`
A new method was introduced to uniformaly start daemons and log output
accordingly. The methods for daemon start were renamed (plural ->
singular), therefore the adjustments in `start-mailserver.sh`.
* cleaned Fetchmail setup from `daemon-stack.sh`
Not sure why, but the Fetchmail setup was somehow happening in
`daemon-stack.sh` - this is not supposed to be the case. I relocated the
setup into `setup-stack.sh`, where it belong.
* delete old, unnecessary script in `target/bin/`
These are unused leftovers from the last commit, that relocated the
setup of Fetchmail into `setup.stack.sh`.
* corrected changedetector function name
* Apply suggestions from code review
* adjusted `debug-fetchmail` script
It is absolutely fine to source `setup-stack.sh` because sourcing the
script does not execute a single function (by desing of the script).
This way, we retain functionality.
* praise be ShellCheck
* added `log.sh` to `debug-fetchmail` as a dependency
* final cleanup
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
* `update-check.sh` now uses the new log
* refactored `setup-stack.sh`
The changes are:
1. Replaced `""` wiht `''` where possible (reasoning: Bash is very
implicit and I'd like to use `''` where possible to indicate no
variables are expanded here)
2. `> /file` -> `>/file` according to our style guide
3. Some log adjustments for messages where I deemed it appropriate
4. Then, an error message from a Dovecot setup was also prevented (by
adding a check whether the directory is present before a `: >...`
command would create a file in this directory).
These are all small, miscellaneous changes that I wanted to combine into
one commit and ultimately one PR because I see no point in opening a PR
for every small change here. I hope this is fine.
* added a small `sleep` to the `_shutdown` function
This ensure the last log message is actually logged before Supervisor
logs the message that it received a SIGTERM. This makes reading the log
easier because now the causal relationship is shown (we are terminating
Supervisor, and not someone else and we're just logging it).
I forgot to replace `""` with `''` in `update-check.sh`, so I included
it here because this is the last commit before PR review.
* re-add exit on successful update (only)
* re-added date information to update-check log messages
* added `_log_with_date` function
The new function will log a message with a proper timestamp. This is all
handled in `log.sh`, we therefore not need to source other files too.
This will be used in the future by `check-for-changes.sh` as well :)
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* added new `_log` function
With `_log`, the `_notify` method wa rendered obsolete. `_notify` was
not completely removed due to test failures in `check-for-changes.sh`.
The new `_log` function properly uses log levels such as `trace`,
`debug`, `info`, `warn` and `error`. It provides a cleaner solution
and renders `DMS_DEBUG` obsolete too (as only `_notify` depends on it).
* converted all helper script to new `_log` function
* converted all startup stacks to new `log` function
* `start-mailserver.sh` now uses new `_log` function
* final test and misc small script adjustments
* updated documentation
The new setup will now set env variables on one place and on one place
only. The old setup used two separate places wich is not DRY and
confusing.
Some default values changed:
1. PFLOGSUMM_TRIGGER: logrotate => none
2. REPORT_SENDER: mailserver-report@HOSTNAME => mailserver-report@DOMAIN
3. REPORT_RECIPIENT: "0" => POSTMASTER_ADDRESS
One env variable was renamed: REPORT_INTERVAL => LOGROTATE_INTERVAL
I believe these defaults to be more sensible, especially the REPORT_RECIPIENT
address. The PFLOGSUMM_TRIGGER value was changed to `none` because otherwise
people would start getting daily Postfix log summary reports automatically.
Now, this is opt-in, and reports are sent only when enabled properly.
Some of the variables changed were marked as deprecated. I removed the note,
as the variables now bear some (sane) defaults again for other variables
(i.e.) REPORT_RECIPIENT is now default for other recipient addresses.
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Removes duplicate logic from `check-for-changes.sh` that is used/maintained elsewhere to avoid risk of problems, as this code is already starting to diverge / rot.
---
Previously the change detection support has had code added for rebuilding config upon change detection which is the same as code run during startup scripts. Unfortunately over time this has fallen out of sync. Mostly the startup scripts would get maintenance and the contributor and reviewers may not have been aware of the duplicate code handled by `check-for-changes.sh`.
That code was starting to diverge in addition to some changes in structure (_eg: relay host logic seems interleaved here vs separated out in startup scripts_). I wanted to address this before it risks becoming a much bigger headache.
Rather than bloat `helper-functions.sh` further, I've added a `helpers/` folder extracting relevant common logic between startup scripts and `changedetector`. If you want to follow that process I've kept scoped commits to make those diffs easier. Some minor changes/improvements were added but nothing significant.
---
- chore: Extract relay host logic to new `relay.sh` helper
- chore: Extract `/etc/postfix/sasl_passwd` logic to new `sasl.sh` helper
- chore: Extract `postfix-accounts.cf` logic to new `accounts.sh` helper
- chore: Extract `/etc/aliases` logic to new `aliases.sh` helper
- chore: Extract `/etc/postfix/vhost` logic to new `postfix.sh` helper
- chore: Add inline docs for Postfix configs
> These are possibly more verbose than needed and can be reduced at a later stage.
> They are helpful during this refactor process while investigating that everything is handled correctly.
`accounts.sh`:
- Add note regarding potential bug for bare domain setups with `/etc/postfix/vhost` and `mydestination` sharing same domain value.
`relay.sh`:
- Remove the tabs for a single space delimiter, revised associated comment.
- Add PR reference for original `_populate_relayhost_map` implementation which has some useful details.
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Mostly cleans up the code and documents it better, although there are some minor fixes for handling `SSL_DOMAIN` ENV and additional logging added for spotting issues related to it in future when troubleshooting.
Commits are scoped with context messages for easing review if necessary. Overview of changes:
Traefik specific:
- Logic extracted out into it's own function.
- Conditional reworked to assist with debugging.
- `SSL_DOMAIN` must not be empty when attempting to extract.
- Added additional notes.
`SSL_TYPE=letsencrypt` case:
- Revised top note block.
- Correct handling for `SSL_DOMAIN`.
- Removed some unnecessary nesting.
- Less repetitive error message for `LETSENCRYPT_DOMAIN`.
- Added use of panics where appropriate (kept `return 1` so failures still exit functionality early).
- Improved inline docs.
Dovecot quota support would log auth failures when Postfix validated incoming mail to accept/reject and the `check_policy_service` for `quota-status` was queried with a recipient that was an account alias.
When Dovecot is not aware of the user account, it will not be able to check a quota and inform Postfix that everything is fine, Postfix will accept the mail and send it to Dovecot, where if the quota is exceeded will result in a bounce back to the sender. This is considered "backscatter" and can be abused by spammers forging the sender address which can get your server blacklisted.
The solution is to either disable quota support `ENABLE_QUOTAS=0`, or as a workaround, add dummy accounts to Dovecot userdb for aliases in `postfix-virtual.cf` (not `postfix-aliases.cf`), these dummy accounts will map to the real user account mailbox (real users are defined in `postfix-accounts.cf`).
The workaround is naive, in that we only check for basic 1-to-1 alias mapping to real accounts. This will still be an issue for aliases that map to another alias or multiple addresses (real or alias). Unfortunately Postfix will not expand aliases until accepting mail where this would be too late.
A better solution is to proxy the `check_policy_service` from Dovecot `quota-status` that Postfix queries in `main.cf:smtpd_recipient_restrictions`, however this requires a fair amount more of additional work and still requires an implementation to recursively query aliases for nested or multiple address mappings, which can then be forwarded to the `quota-status` service configured by Dovecot in `/etc/dovecot/conf.d/90-quota.conf`.
LDAP users are unaffected as quota support is not supported/implemented with `docker-mailserver` at this time, it is always considered disabled when using LDAP.
---
Additionally Dovecot configuration for `passdb` has been fixed to use the correct password hash scheme of `SHA512-CRYPT`.
Co-authored-by: Casper <casperklein@users.noreply.github.com>
Co-authored-by: Brennan Kinney <5098581+polarathene@users.noreply.github.com>
* function _defunc removed
* _shutdown is better than just notify in that cases
* PANIC_TYPE 'fail-init' introduced
Co-authored-by: Georg Lauterbach <44545919+georglauterbach@users.noreply.github.com>
