docker-mailserver/test/tests/parallel/set1/dovecot/dovecot_sieve.bats

61 lines
2.3 KiB
Plaintext
Raw Normal View History

tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
load "${REPOSITORY_ROOT}/test/helper/common"
load "${REPOSITORY_ROOT}/test/helper/setup"
# Docs:
# https://docker-mailserver.github.io/docker-mailserver/edge/config/advanced/mail-sieve/
BATS_TEST_NAME_PREFIX='[Dovecot] (Sieve support) '
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
CONTAINER_NAME='dms-test_dovecot-sieve'
function setup_file() {
_init_with_defaults
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
# Move sieve configs into main `/tmp/docker-mailserver` config location:
mv "${TEST_TMP_CONFIG}/dovecot-sieve/"* "${TEST_TMP_CONFIG}/"
local CONTAINER_ARGS_ENV_CUSTOM=(
--env ENABLE_MANAGESIEVE=1
# Required for mail delivery via nc:
--env PERMIT_DOCKER=container
# Mount into home dir for user1 to treat as a user-sieve:
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
# NOTE: Cannot use ':ro', 'start-mailserver.sh' attempts to 'chown -R' /var/mail:
--volume "${TEST_TMP_CONFIG}/dovecot.sieve:/var/mail/localhost.localdomain/user1/home/.dovecot.sieve"
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
)
_common_container_setup 'CONTAINER_ARGS_ENV_CUSTOM'
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
_wait_for_smtp_port_in_container
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
# Single mail sent from 'spam@spam.com' that is handled by User (relocate) and Global (copy) sieves for user1:
_send_email --data 'sieve/spam-folder.txt'
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
# Mail for user2 triggers the sieve-pipe:
_send_email --to 'user2@otherdomain.tld' --data 'sieve/pipe.txt'
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
_wait_for_empty_mail_queue_in_container
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
}
function teardown_file() { _default_teardown ; }
# dovecot-sieve/dovecot.sieve
@test "User Sieve - should store mail from 'spam@spam.com' into recipient (user1) mailbox 'INBOX.spam'" {
2023-03-18 15:32:48 +00:00
_count_files_in_directory_in_container /var/mail/localhost.localdomain/user1/.INBOX.spam/new 1
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
}
# dovecot-sieve/before.dovecot.sieve
@test "Global Sieve - should have copied mail from 'spam@spam.com' to recipient (user1) inbox" {
2023-03-18 15:32:48 +00:00
_run_in_container grep -R 'Spambot <spam@spam.com>' /var/mail/localhost.localdomain/user1/new/
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
assert_success
}
# dovecot-sieve/sieve-pipe + dovecot-sieve/user2@otherdomain.tld.dovecot.sieve
@test "Sieve Pipe - should pipe mail received for user2 into '/tmp/pipe-test.out'" {
2023-03-18 15:32:48 +00:00
_run_in_container_bash '[[ -f /tmp/pipe-test.out ]]'
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
assert_success
}
# Only test coverage for feature is to check that the service is listening on the expected port:
# https://doc.dovecot.org/admin_manual/pigeonhole_managesieve_server/
@test "ENV 'ENABLE_MANAGESIEVE' - should have enabled service on port 4190" {
2023-03-18 15:32:48 +00:00
_run_in_container nc -z 0.0.0.0 4190
tests: Extract some test cases out from `tests.bats` (#2980) While working on tests, I noticed that some of the configs being mounted were adding a few seconds to the start-up time of each container. Notably `postfix-*` and `dovecot.conf` config files, which have been extracted out into their own tests with those files moved into a separate config folder. `tests.bats` has been adapted to the common setup helper, and removed ENV no longer required to run those tests. Future PRs will extract out more tests. Review may be easier via individual commit diffs and their associated commit messages describing relevant changes. <details> <summary>Commit message history for reference</summary> ```markdown tests(chore): `tests.bats` - Remove redundant config === - ONEDIR volume support no longer relevant, this should have been dropped. - ClamAV ENV no longer relevant as related tests have been extracted already. - Same with the some of the SpamAssassin ENV config. - `VIRUSMAILS_DELETE_DELAY` is tested in the file, but doesn't use this ENV at all? (runs a separate instance to test the ENV instead) - Hostname updated in preparation for migrating to new test helpers. Relevant test lines referencing the hostname have likewise been updated. ``` ```markdown tests(chore): `tests.bats` - Convert to common setup === ENV remains the same, but required adding `ENABLE_AMAVIS=1` to bring that back, while the following became redundant as they're now defaulting to explicitly disabled in the helper method: - `ENABLE_CLAMAV=0` - `LOG_LEVEL=debug` - `ENABLE_UPDATE_CHECK=0` - `--hostname` + `--tty` + standard `--volume` lines - `-e` option expanded to long-name `--env`, and all `\` dropped as no longer necessary. `wait_for_finished_setup_in_container` is now redundant thanks to `common_container_setup`. ``` ```markdown tests(refactor): `tests.bats` - Extract out Dovecot Sieve tests === Sieve test files relocated into `test/config/dovecot-sieve/` for better isolation. `dovecot.sieve` was not using the `reject` import, and we should not encourage it? (docs still do): https://support.tigertech.net/sieve#the-sieve-reject-jmp ``` ```markdown tests: `tests.bats` - Extract out `checking smtp` tests === Migrated to the standard template and copied over the original test cases with `_run_in_container` adjustment only. Identified minimum required ENV along with which mail is required for each test case. ``` ```markdown tests(refactor): `smtp-delivery.bats` === - Disabled `ENABLE_SRS=1`, not necessary for these tests. - Added a SpamAssassin related test (X-SPAM headers) which requires `SA_TAG` to properly pass (or `ENABLE_SRS=1` to deliver into inbox). - Many lines with double quotes changed to single quote wrapping, and moving out `grep` filters into `assert_output --partial` lines instead. - Instead of `wc -l` making failures less helpful, switch to the helper method `_should_output_number_of_lines` - x2 `assert_output` with different EOF style of usage was not actually failing on tests when it should. Changed to assert partial output of each expected line, and count the number of lines instead. - Added additional comments related to the test cases with a `TODO` note about `SPAMASSASSIN_SPAM_TO_INBOX=1`. - Revised test case names, including using the common prefix var. - `tests.bats` no longer needs to send all these emails, no other test cases require them. This affects a test checking a `/mail` folder exists which has been corrected, and a quotas test case adjusted to expect an empty quota size output. ``` ```markdown tests: `tests.bats` - Extract out test cases for config overrides === Slight improvement by additionally matching `postconf` output to verify the setting is properly applied. ``` ```markdown tests: `tests.bats` - Extract out Amavis SpamAssassin test case === Removes the need for SpamAssassin ENV in `tests.bats`. ``` </details>
2023-01-06 22:36:20 +00:00
assert_success
}