docker-mailserver/test/mail_with_ldap.bats

259 lines
12 KiB
Plaintext
Raw Normal View History

load 'test_helper/common'
function setup_file() {
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
pushd test/docker-openldap/ || return 1
docker build -f Dockerfile -t ldap --no-cache .
popd || return 1
export DOMAIN='my-domain.com'
export FQDN_MAIL="mail.${DOMAIN}"
export FQDN_LDAP="ldap.${DOMAIN}"
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
export FQDN_LOCALHOST_A='localhost.localdomain'
export FQDN_LOCALHOST_B='localhost.otherdomain'
export DMS_TEST_NETWORK='test-network-ldap'
# NOTE: If the network already exists, test will fail to start.
docker network create "${DMS_TEST_NETWORK}"
docker run -d --name ldap_for_mail \
--env LDAP_DOMAIN="${FQDN_LOCALHOST_A}" \
--network "${DMS_TEST_NETWORK}" \
--network-alias 'ldap' \
--hostname "${FQDN_LDAP}" \
--tty \
ldap # Image name
# _setup_ldap uses configomat with .ext files and ENV vars like DOVECOT_TLS with a prefix (eg DOVECOT_ or LDAP_)
local PRIVATE_CONFIG
PRIVATE_CONFIG=$(duplicate_config_for_container .)
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
docker run -d --name mail_with_ldap \
-v "${PRIVATE_CONFIG}:/tmp/docker-mailserver" \
-v "$(pwd)/test/test-files:/tmp/docker-mailserver-test:ro" \
-e DOVECOT_PASS_FILTER="(&(objectClass=PostfixBookMailAccount)(uniqueIdentifier=%n))" \
-e DOVECOT_TLS=no \
-e DOVECOT_USER_FILTER="(&(objectClass=PostfixBookMailAccount)(uniqueIdentifier=%n))" \
-e ACCOUNT_PROVISIONER=LDAP \
-e PFLOGSUMM_TRIGGER=logrotate \
-e ENABLE_SASLAUTHD=1 \
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
-e LDAP_BIND_DN=cn=admin,dc=localhost,dc=localdomain \
-e LDAP_BIND_PW=admin \
-e LDAP_QUERY_FILTER_ALIAS="(|(&(mailAlias=%s)(objectClass=PostfixBookMailForward))(&(mailAlias=%s)(objectClass=PostfixBookMailAccount)(mailEnabled=TRUE)))" \
-e LDAP_QUERY_FILTER_DOMAIN="(|(&(mail=*@%s)(objectClass=PostfixBookMailAccount)(mailEnabled=TRUE))(&(mailGroupMember=*@%s)(objectClass=PostfixBookMailAccount)(mailEnabled=TRUE))(&(mailalias=*@%s)(objectClass=PostfixBookMailForward)))" \
-e LDAP_QUERY_FILTER_GROUP="(&(mailGroupMember=%s)(mailEnabled=TRUE))" \
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
-e LDAP_QUERY_FILTER_SENDERS="(|(&(mail=%s)(mailEnabled=TRUE))(&(mailGroupMember=%s)(mailEnabled=TRUE))(|(&(mailAlias=%s)(objectClass=PostfixBookMailForward))(&(mailAlias=%s)(objectClass=PostfixBookMailAccount)(mailEnabled=TRUE)))(uniqueIdentifier=some.user.id))" \
-e LDAP_QUERY_FILTER_USER="(&(mail=%s)(mailEnabled=TRUE))" \
-e LDAP_START_TLS=no \
-e LDAP_SEARCH_BASE=ou=people,dc=localhost,dc=localdomain \
-e LDAP_SERVER_HOST=ldap \
-e PERMIT_DOCKER=container \
-e POSTMASTER_ADDRESS="postmaster@${FQDN_LOCALHOST_A}" \
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
-e REPORT_RECIPIENT=1 \
-e SASLAUTHD_MECHANISMS=ldap \
-e SPOOF_PROTECTION=1 \
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
-e SSL_TYPE='snakeoil' \
--network "${DMS_TEST_NETWORK}" \
--hostname "${FQDN_MAIL}" \
--tty \
"${NAME}" # Image name
wait_for_smtp_port_in_container mail_with_ldap
}
function teardown_file() {
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
docker rm -f ldap_for_mail mail_with_ldap
docker network rm "${DMS_TEST_NETWORK}"
}
# processes
@test "checking process: saslauthd (saslauthd server enabled)" {
run docker exec mail_with_ldap /bin/bash -c "ps aux --forest | grep -v grep | grep '/usr/sbin/saslauthd'"
assert_success
}
# postfix
@test "checking postfix: ldap lookup works correctly" {
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
run docker exec mail_with_ldap /bin/sh -c "postmap -q some.user@${FQDN_LOCALHOST_A} ldap:/etc/postfix/ldap-users.cf"
assert_success
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
assert_output "some.user@${FQDN_LOCALHOST_A}"
run docker exec mail_with_ldap /bin/sh -c "postmap -q postmaster@${FQDN_LOCALHOST_A} ldap:/etc/postfix/ldap-aliases.cf"
assert_success
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
assert_output "some.user@${FQDN_LOCALHOST_A}"
run docker exec mail_with_ldap /bin/sh -c "postmap -q employees@${FQDN_LOCALHOST_A} ldap:/etc/postfix/ldap-groups.cf"
assert_success
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
assert_output "some.user@${FQDN_LOCALHOST_A}"
# Test of the user part of the domain is not the same as the uniqueIdentifier part in the ldap
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
run docker exec mail_with_ldap /bin/sh -c "postmap -q some.user.email@${FQDN_LOCALHOST_A} ldap:/etc/postfix/ldap-users.cf"
assert_success
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
assert_output "some.user.email@${FQDN_LOCALHOST_A}"
# Test email receiving from a other domain then the primary domain of the mailserver
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
run docker exec mail_with_ldap /bin/sh -c "postmap -q some.other.user@${FQDN_LOCALHOST_B} ldap:/etc/postfix/ldap-users.cf"
assert_success
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
assert_output "some.other.user@${FQDN_LOCALHOST_B}"
run docker exec mail_with_ldap /bin/sh -c "postmap -q postmaster@${FQDN_LOCALHOST_B} ldap:/etc/postfix/ldap-aliases.cf"
assert_success
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
assert_output "some.other.user@${FQDN_LOCALHOST_B}"
run docker exec mail_with_ldap /bin/sh -c "postmap -q employees@${FQDN_LOCALHOST_B} ldap:/etc/postfix/ldap-groups.cf"
assert_success
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
assert_output "some.other.user@${FQDN_LOCALHOST_B}"
}
@test "checking postfix: ldap custom config files copied" {
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 00:53:30 +00:00
run docker exec mail_with_ldap /bin/sh -c "grep '# Testconfig for ldap integration' /etc/postfix/ldap-users.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep '# Testconfig for ldap integration' /etc/postfix/ldap-groups.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep '# Testconfig for ldap integration' /etc/postfix/ldap-aliases.cf"
assert_success
}
@test "checking postfix: ldap config overwrites success" {
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 00:53:30 +00:00
run docker exec mail_with_ldap /bin/sh -c "grep 'server_host = ldap' /etc/postfix/ldap-users.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'start_tls = no' /etc/postfix/ldap-users.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'search_base = ou=people,dc=localhost,dc=localdomain' /etc/postfix/ldap-users.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'bind_dn = cn=admin,dc=localhost,dc=localdomain' /etc/postfix/ldap-users.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'server_host = ldap' /etc/postfix/ldap-groups.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'start_tls = no' /etc/postfix/ldap-groups.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'search_base = ou=people,dc=localhost,dc=localdomain' /etc/postfix/ldap-groups.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'bind_dn = cn=admin,dc=localhost,dc=localdomain' /etc/postfix/ldap-groups.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'server_host = ldap' /etc/postfix/ldap-aliases.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'start_tls = no' /etc/postfix/ldap-aliases.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'search_base = ou=people,dc=localhost,dc=localdomain' /etc/postfix/ldap-aliases.cf"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'bind_dn = cn=admin,dc=localhost,dc=localdomain' /etc/postfix/ldap-aliases.cf"
assert_success
}
# dovecot
@test "checking dovecot: ldap imap connection and authentication works" {
run docker exec mail_with_ldap /bin/sh -c "nc -w 1 0.0.0.0 143 < /tmp/docker-mailserver-test/auth/imap-ldap-auth.txt"
assert_success
}
@test "checking dovecot: ldap mail delivery works" {
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
run docker exec mail_with_ldap /bin/sh -c "sendmail -f user@external.tld some.user@${FQDN_LOCALHOST_A} < /tmp/docker-mailserver-test/email-templates/test-email.txt"
sleep 10
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
run docker exec mail_with_ldap /bin/sh -c "ls -A /var/mail/${FQDN_LOCALHOST_A}/some.user/new | wc -l"
assert_success
assert_output 1
}
@test "checking dovecot: ldap mail delivery works for a different domain then the mailserver" {
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
run docker exec mail_with_ldap /bin/sh -c "sendmail -f user@external.tld some.other.user@${FQDN_LOCALHOST_B} < /tmp/docker-mailserver-test/email-templates/test-email.txt"
sleep 10
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
run docker exec mail_with_ldap /bin/sh -c "ls -A /var/mail/${FQDN_LOCALHOST_A}/some.other.user/new | wc -l"
assert_success
assert_output 1
}
@test "checking dovecot: ldap config overwrites success" {
run docker exec mail_with_ldap /bin/sh -c "grep 'uris = ldap://ldap' /etc/dovecot/dovecot-ldap.conf.ext"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'tls = no' /etc/dovecot/dovecot-ldap.conf.ext"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'base = ou=people,dc=localhost,dc=localdomain' /etc/dovecot/dovecot-ldap.conf.ext"
assert_success
run docker exec mail_with_ldap /bin/sh -c "grep 'dn = cn=admin,dc=localhost,dc=localdomain' /etc/dovecot/dovecot-ldap.conf.ext"
assert_success
}
@test "checking dovecot: postmaster address" {
fix: Remove `mkcert.sh` usage + `_setup_ssl` refactor. (#2196) * chore(refactor): DRY up the `_setup_ssl` method - `/etc/postfix/ssl` was a bit misleading in usage here. As a maintainer (of my own contribution!) I was confused why only `/etc/postfix/ssl` was referenced and not `/etc/dovecot/ssl`. - The postfix specific path is unnecessary, dovecot was referencing it via it's config, the same can be done from postfix to a generic DMS specific config location instead. - This location is defined and created early as `/etc/dms/tls` (with var `DMS_TLS_PATH`). All usage of `/etc/postfix/ssl` has been replaced, making it easier to grok. Several `mkdir` commands related to this have been dropped as a result. - Likewise, a related `TMP_DMS_TLS_PATH` var provides a reference to the config volume path `/tmp/docker-mailserver` which is used for conditions on presently hard-coded paths. - Other values that benefit from being DRY have been lifted up into vars. Definitely easier to follow now and makes some further opportunities clearer to tackle in a future refactor. - `chmod` has been updated where appropriate. Public key/cert is acceptable to have as readable by non-root users (644). The custom type with single fullchain file was not root accessible only, but should as it contains a private key. - That said, the security benefit can be a bit moot due to source files that were copied remain present, the user would be responsible to ensure similar permissions on their source files. - I've not touched LetsEncrypt section as I don't have time to investigate into that yet (not familiar with that portion). --- * chore: Remove mkcert logic and dovecot cert - No longer serving a purpose. - Our own TLS startup script handles a variety of cert scenarios, while the dropped code was always generating a self-signed cert and persisting an unused cert regardless with `ONE_DIR=1`. - To avoid similar issues that DH params had with doveadm validating filepath values in the SSL config, the default dummy values match postfix pointing to "snakeoil" cert. That serves the same purpose as mkcert was covering in the image. - Bonus, no more hassle with differing mkcert target paths for users replacing our supplied Dovecot with the latest community edition. --- * Error handling for SSL_TYPE - Added a panic utility to exit early when SSL_TYPE conditions are misconfigured. - Some info text had order of key/cert occurrence swapped to be consistent with key then cert. - Some existing comments moved and rephrased. - Additional comments added. - `-f` test for cert files instead of `-e` (true also for directories/devices/symlinks). - _notify messages lifted out of conditionals so that they always output when the case is hit. - ~~Empty SSL_TYPE collapsed into catch all panic, while it's contents is now mapped to a new 'disabled' value.~~ --- * Use sedfile + improve sed expressions + update case style - Uses sedfile when appropriate (file change intentional, not optional match/check). - sed expressions modified to be DRY and reduce escaping via `-r` flag (acceptable if actual text content contains no `?`,`+`,`()` or `{}` characters, [otherwise they must be escaped](https://www.gnu.org/software/sed/manual/html_node/Extended-regexps.html)). - sed captures anything matched between the parenthesis`()` and inserts it via `\1` as part of the replacement. - case statements adopt the `(` prefix, adopting recent shell style for consistency. --- * Refactor SSL_TYPE=disabled - Postfix is also disabled now. - Included heavy inline documentation reference for maintainers. - Dropped an obsolete postfix config option 'use_tls' on the relayhost function, it was replaced by 'security_level'. --- * I'm a friggin' sed wizard now - The `modern` TLS_LEVEL is the default values for the configs they modify. As such, `sedfile` outputs an "Error" which isn't an actual concern, back to regular `sed`. - I realized that multiple edits for the same file can all be done at once via `-e` (assuming other sed options are the same for each operation), and that `g` suffix is global scope for single line match, not whole file (default as sed iterates through individual lines). - Some postfix replacements have `smtp` and `smtpd` lines, collapsed into a single `smtpd?` instead now that I know sed better. --- * tests(fix): Tests that require SSL/TLS to pass - SSL_TYPE=snakeoil added as temporary workaround. - nmap tests are being dropped. These were added about 4-5 years ago, I have since made these redundant with the `testssl.sh` tests. - Additionally the `--link` option is deprecated and IIRC these grades were a bit misleading when I initially used nmap in my own TLS cipher suite update PRs in the past. - The removed SSL test is already handled in mail_ssl_manual.bats ldap test: - Replace `--link` alias option with `--network` and alias assignment. - Parameterized some values and added the `SSL_TYPE` to resolve the starttls test failure. privacy test: - Also needed `SSL_TYPE` to pass the starttls test. `tests.bats` had another starttls test for imap: - Workaround for now is to give the main test container `SSL_TYPE=snakeoil`. --- * Remove the expired lets-encrypt cert This expired in March 2021. It was originally required when first added back in 2016 as LetsEncrypt was fairly new and not as broadly accepted into OS trust stores. No longer the case today. --- * chore: Housekeeping Not required for this PR branch, little bit of tidying up while working on these two test files. - privacy test copied over content when extracted from `tests.bats` that isn't relevant. - ldap test was not as easy to identify the source of DOVECOT_TLS. Added comment to make the prefix connection to `configomat.sh` and `.ext` files more easier to find. - Additionally converted the two localhost FQDN to vars. --- * Default SSL_TYPE becomes `''` (aka equivalent to desired `disabled` case) - This is to prevent other tests from failing by hitting the panic catchall case. - More ideal would be adjusting tests to default to `disabled`, rather than treating `disabled` as an empty / unset SSL_TYPE value. --- * Add inline documentation for `dms_panic` - This could later be better formatted and placed into contributor docs. Panic with kill (shutdown) not exit (errex): - `kill 1` from `_shutdown` will send SIGTERM signal to PID 1 (init process). - `exit 1` within the `start-mailserver.sh` init scripts context, will just exit the initialization script leaving the container running when it shouldn't. The two previous `_shutdown` methods can benefit from using `dms_panic` wrapper instead to standardize on panic messages.
2021-09-19 12:31:11 +00:00
run docker exec mail_with_ldap /bin/sh -c "grep 'postmaster_address = postmaster@${FQDN_LOCALHOST_A}' /etc/dovecot/conf.d/15-lda.conf"
assert_success
}
@test "checking dovecot: quota plugin is disabled" {
run docker exec mail_with_ldap /bin/sh -c "grep '\$mail_plugins quota' /etc/dovecot/conf.d/10-mail.conf"
assert_failure
run docker exec mail_with_ldap /bin/sh -c "grep '\$mail_plugins imap_quota' /etc/dovecot/conf.d/20-imap.conf"
assert_failure
run docker exec mail_with_ldap ls /etc/dovecot/conf.d/90-quota.conf
assert_failure
run docker exec mail_with_ldap ls /etc/dovecot/conf.d/90-quota.conf.disab
assert_success
}
2020-04-30 10:05:36 +00:00
@test "checking postfix: dovecot quota absent in postconf" {
run docker exec mail_with_ldap /bin/bash -c "postconf | grep 'check_policy_service inet:localhost:65265'"
assert_failure
}
@test "checking spoofing (with LDAP): rejects sender forging" {
wait_for_smtp_port_in_container_to_respond mail_with_ldap
run docker exec mail_with_ldap /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/ldap-smtp-auth-spoofed.txt | grep 'Sender address rejected: not owned by user'"
assert_success
}
# ATTENTION: these tests must come after "checking dovecot: ldap mail delivery works" since they will deliver an email which skews the count in said test, leading to failure
@test "checking spoofing: accepts sending as alias (with LDAP)" {
run docker exec mail_with_ldap /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/ldap-smtp-auth-spoofed-alias.txt | grep 'End data with'"
assert_success
}
@test "checking spoofing: uses senders filter" {
run docker exec mail_with_ldap /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/ldap-smtp-auth-spoofed-sender-with-filter-exception.txt | grep 'End data with'"
assert_success
}
# saslauthd
@test "checking saslauthd: sasl ldap authentication works" {
run docker exec mail_with_ldap bash -c "testsaslauthd -u some.user -p secret"
assert_success
}
@test "checking saslauthd: ldap smtp authentication" {
run docker exec mail_with_ldap /bin/sh -c "nc -w 5 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/sasl-ldap-smtp-auth.txt | grep 'Authentication successful'"
assert_success
run docker exec mail_with_ldap /bin/sh -c "openssl s_client -quiet -connect 0.0.0.0:465 < /tmp/docker-mailserver-test/auth/sasl-ldap-smtp-auth.txt | grep 'Authentication successful'"
assert_success
run docker exec mail_with_ldap /bin/sh -c "openssl s_client -quiet -starttls smtp -connect 0.0.0.0:587 < /tmp/docker-mailserver-test/auth/sasl-ldap-smtp-auth.txt | grep 'Authentication successful'"
assert_success
}
#
# Pflogsumm delivery check
#
@test "checking pflogsum delivery" {
# checking default sender is correctly set when env variable not defined
run docker exec mail_with_ldap grep "mailserver-report@${FQDN_MAIL}" /etc/logrotate.d/maillog
assert_success
# checking default logrotation setup
run docker exec mail_with_ldap grep "weekly" /etc/logrotate.d/maillog
assert_success
}
#
# supervisor
#
@test "checking restart of process: saslauthd (saslauthd server enabled)" {
run docker exec mail_with_ldap /bin/bash -c "pkill saslauthd && sleep 10 && ps aux --forest | grep -v grep | grep '/usr/sbin/saslauthd'"
assert_success
}