docker-mailserver/test/tests/serial/mail_quotas_disabled.bats

44 lines
1.3 KiB
Plaintext
Raw Normal View History

2020-05-01 21:42:21 +00:00
load 'test_helper/common'
# Test case
# ---------
# When ENABLE_QUOTAS is explicitly disabled (ENABLE_QUOTAS=0), dovecot quota must not be enabled.
function setup_file() {
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 00:53:30 +00:00
local PRIVATE_CONFIG
PRIVATE_CONFIG=$(duplicate_config_for_container .)
docker run -d --name mail_no_quotas \
-v "${PRIVATE_CONFIG}":/tmp/docker-mailserver \
-v "$(pwd)/test/test-files":/tmp/docker-mailserver-test:ro \
-e ENABLE_QUOTAS=0 \
-h mail.my-domain.com -t "${NAME}"
wait_for_finished_setup_in_container mail_no_quotas
2020-05-01 21:42:21 +00:00
}
function teardown_file() {
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 00:53:30 +00:00
docker rm -f mail_no_quotas
2020-05-01 21:42:21 +00:00
}
@test "checking dovecot: (ENABLE_QUOTAS=0) quota plugin is disabled" {
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 00:53:30 +00:00
run docker exec mail_no_quotas /bin/sh -c "grep '\$mail_plugins quota' /etc/dovecot/conf.d/10-mail.conf"
assert_failure
run docker exec mail_no_quotas /bin/sh -c "grep '\$mail_plugins imap_quota' /etc/dovecot/conf.d/20-imap.conf"
assert_failure
run docker exec mail_no_quotas ls /etc/dovecot/conf.d/90-quota.conf
assert_failure
run docker exec mail_no_quotas ls /etc/dovecot/conf.d/90-quota.conf.disab
assert_success
2020-05-01 21:42:21 +00:00
}
@test "checking postfix: (ENABLE_QUOTAS=0) dovecot quota absent in postconf" {
run docker exec mail_no_quotas /bin/bash -c "postconf | grep 'check_policy_service inet:localhost:65265'"
assert_failure
}